VEVOR S1C-242413 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
Commercial Stand Alone Sink
User Manual
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the
major top brands and doses not necessarily mean to cover all categories of tools offered by
us. You are kindly reminded to verify carefully when you are placing an order with us if you
are actually saving half in comparison with the top major brands.

2
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
SHIPPING SCALE

3
This is the original instruction, please read all manual instructions carefully
before operating. VEVOR reserves clear interpretation of our user manual.
The appearance of the product shall be subject to the product you received.
Please forgive us that we won't inform you again if there is any
technology or software updates on our product.
Technical Specifications
Model
N. W.
G. W.
Carton Size
S1C-151512
12.6Kg
15.8Kg±3%
520*515*580 mm±10mm
S1C-181812
14.2Kg
18Kg±3%
585*585*555 mm±10mm
S1C-242413
18.4Kg
23.6Kg±3%
745*740*580 mm±10mm
SAFETY
Note / Remark. Caution / Warning.
Read the instruction manual.
Read this material before using this product. Failure to do so can result
in serious injury. Save This Manual.
Assembly precautions
1.Assemble only according to these instructions. Improper assembly can
create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during
assembly.
3.Keep assembly area clean and well lit.
4.Keep bystanders out of the area during assembly.
5.Do not assemble when tired or when under the influence of alcohol, drugs
or medication.
6.Weight capacity and other product capabilities apply to properly and
completely assembled product only.
7.Assemble on a flat, level, hard and smooth surface capable of safely

4
supporting a fully loaded Commercial Stand Alone Sink.
Use precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. DO not sit, stand on this Commercial Stand Alone Sink.
2. This product is not a toy. Do not allow children to play with or near this item.
3. Do not exceed weight capacities, evenly distributed from bottom up. Be
aware of dynamic loading! Sudden load movement may briefly create
excess load causing product failure. Do not exceed capacity of Commercial
Stand Alone Sink.
4. Empty Commercial Stand Alone Sink before moving.
5. Use only on a flat, level, hard and smooth surface capable of safely
supporting a fully loaded Commercial Stand Alone Sink.
6. Use as intended only.
7. Inspect before every use; do not use if parts are loose or damaged.
WARNING!
DO NOT let comfort or familiarity with product (gained from repeated use)
replace strict adherence to the product safety rules. If you use this product
unsafely or incorrectly, you can suffer serious personal injury.
Preparation
Before beginning assembIy of product. make sure aII parts are present﹒
Compare parts with package contents Iist and hardware contents Iist﹒
If any part is missing or damaged. do not attempt to assembIe the product﹒
Tools Needed

5
Exploded Drawing
lncluded

6

7
Assembly
STEP1:Place the washer onto the end of faucet and insert the faucet through
the back side of the sink . From back side the sink , secure the faucet (E) to
the sink using a brass screwed nipple (G).

8
STEP2:Connect the pipe and legs with connectors ’Tighten with a wrench
STEP3:Insert leg into the circular tube of sink, tighten the screws with an
Allen wrench after the leg is placed with the right angel.

9
STEP4:Put the rubber washer on the top of the drain opening in the sink .Put
the drain bowl on the rubber washer and through the drain opening. Fasten
the threaded washer onto the drain bowl and tighten. lnsert the drain plug into
the drain bowl

10
NOTE
If the ground is uneven﹐you can rotate the adjusting foot to keep it stable.

11
MAINTENANCE/ Service
l.If you find rust or mildew on the sink，you can use toothpaste to smear on
the rust and spots﹐and then clean it with a cloth. Remember not to scrub
with steel ball﹐otherwise the protective layer on the surface of the sink will
be damaged.
2.Do not use bleach﹐acid﹐or other abrasive cleaners in sink.
3.Do not put rusty objects in or on the sink.
4.Keep instruction manual for future reference.
5.Periodically check and ensure that all bolts are well-tighten during use.
Disposal
This product should be disposed of in accordance with local regulations. If you
are unsure how to proceed, contact your local authority.
Only qualified technicians are authorized to undertake the repair of Stand
Alone Sink.
For your safety , please observe all safety notes, precautions, and details in
this manual.
Warranty
1.This warranty shall only cover claims for damage due to a fault in the
product's manufacture
2.If a warranty claim is made, the party entitled to warranty cover must
present the proof of purchase, including the purchase date.
3.Customers’ satisfaction is always the motivation of our brand growth. We
promise to help you solve any issues . Please just let us know if you need
help.
OUR SERVICE TEAM PROMISES TO REPLY TO YOUR MESSAGE WITHIN
24H.
Scope of Warranty
1.We guarantee that VEVOR products are produced in accordance with
iso9001 Quality Management procedures and are free of manufacturing
defects for the period of warranty.
2.This warranty covers faults in the products due to manufacturing defects
within 1 year from date of purchase.After inspection by sales representative,
defective products will be replaced or repaired with equivalent goods free of
charge.
3.Any warranty claim made during warranty period shall not extend the overall
period of warranty coverage.
4.Warranty periods:Warranty claim date

Technical Support and E-Warranty Certificate
www.vevor.com/support
Made In China