VEVOR BT-FL14A User manual

VENTILATION FAN
USER MANUAL
We continue to be committed to provide you tools with competitive price. "Save
Half", "Half Price" or any other similar expressions used by us only represents
an estimate of savings you might benefit from buying certain tools with us
compared to the major top brands and doses not necessarily mean to cover all
categories of tools offered by us. You are kindly reminded to verify carefully
when you are placing an order with us if you are actually saving half in
comparison with the top major brands.

- 1 -

- 2 -
Have product questions? Need technical support? Please feel free to contact us:
[email protected]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions carefully before operating.
VEVOR reserves a clear interpretation of our user manual. The appear- ance of the product shall
be subject to the product you received. Please forgive us that we won't inform you again if there
are any technology or software updates on our product.
VENTILATION FAN
<Picture Only For Reference>

- 3 -
【Contents】
Ⅰ、SAFETY PRECAUTIONS
Ⅱ、PRODUCT DESCRIPTION
Ⅲ、INSTALLATION
Ⅳ、DIMENSION AND SPECIFICATION
Ⅴ、POWERING AND SETUP
Ⅵ、CLEANING
Ⅶ、PROGRAMMING
Ⅷ、FAQ
Ⅸ、ATTENTIONS
SAFETY PRECAUTIONS
WARNING
Improper operation may cause personal injury.
Improper operation may cause damage to the machine.
Improper operation may cause others object damage.
The symbol indicates that the user should pay high attention to
and pay attention to the drawing shows the situation to be
noted, and the left figure shows "Be careful of electric shock"
Disconnect the fan when moving from one location to another.
Do not use a power supply that does not meet the rated
voltage
The use of non compliant power supplies can cause fire or
electric shock.
If the machine emits smoke, odor, motor noise and other
abnormal conditions,Please do not use it. It may cause fire or
electric shock
Do not disassemble, repair or rectify the machine during
use.Doing so may result in fire or electric shock and personal
injury

- 4 -
BE CAREFUL
DO NOT use fan in window. Rain may create electrical
hazard.
Do not damage or arbitrarily change the original power
cord, and do not bend, forcibly pull, bind or press the power
cord under heavy objects.This will damage the power cord,
causing electric leakage fire or electric shock
If the machine is not used for a long time, please unplug
the power cord from the socket
If the power cord is damaged, contact your local service
center or a qualified electrician to install an appropriate
replacement cord to prevent any injury or damage
Never insert fingers, pencils, or any other object through
the guard when fan is running.
When the power cord is unplugged from the socket,
the plug should be unplugged. Do not pull the power
cord to forcibly pull the wire, which may cause
damage to the wire and lead to leakage or electric
shock
Please disconnect the power supply when cleaning

- 5 -
PRODUCT DESCRIPTION
TECHNICAL PARAMETER
Brand
Model
BT-FL14A
BT-FL16A
BT-FL18A
Voltage
120 V
120 V
120 V
Frequency
60 Hz
60 Hz
60 Hz
Power
31 W
60 W
126 W
Speed
2550 RPM
2600 RPM
2500 RPM
Duct Size
Φ100/Φ125
Φ150/Φ160
Φ200
Power Cord Length
1.6 M
1.6 M
1.6 M
Working Ambient
Temperature
-10~ 45 ℃
-10~ 45 ℃
-10~ 45 ℃
PRODUCT STRUCTURE DIAGRAM

- 6 -
INSTALLATION
Prepare tools in advance:
Cross screwdriver, Hammer

- 7 -
Installation method:
Step 1：
1、Unscrew and loosen the plastic buckle using a Phillips screwdriver See the(Fig.1.)
2、Remove the motor box assembly from the flange bracket.See the(Fig.2.)
3、Use the flange bracket to set your desired fan position. Mark the four mounting
holes.See the (Fig.3.)
4、Drill four holes into the marked locations. Make sure your mounting area is
structurally sound and free from obstruction.See the(Fig.4.)
Fig.1.
Fig.2.
Fig.3.
Fig.4.

- 8 -
Step 2:
1、If you are mounting onto anything other than a wood support or
stud, insert the included four wall anchors into the drilled mounting holes. You may
need to use a hammer to secure them through the holes. See the (Fig.5.)
2、Paste the cushion onto the flange bracket to ensure that the hole
of the cushion is aligned with the hole of the flange bracket. See the (Fig.6.)
3、Align the flange bracket’s holes with the wall anchors. Screw in
four wood screws with a screwdriver or drill to secure the flange bracket.Make sure
its airflow arrow is pointing in your desired direction.See the (Fig.7.)
4、Slide the motor box back into the flange bracket, making sure its
airflow arrow is pointing in the same direction as the flange bracket’s arrow.See the
(Fig.8.)
Fig.5.
Fig.6.
Fig.7.
Fig.8.

- 9 -
5、Place the plastic clamps back onto the flanges and tighten the screws back to secure
the motor box. See the (Fig.9.)
Step 3：
1、If installing ducting, purchase a suitable duct and duct clamp and secure it to both
ends of the fan to ensure tight sealing. Finally tighten the air duct clamp with a
screwdriver.See the (Fig.10.)
2、If installing with rope hangers, loop the ropes around the flanges and tighten the
rope to secure the fan.See the (Fig.11.)
3、Connect the power cord, turn on the switch to check whether the fan is running, then
finish the installation.
Fig.10.
Fig.9.
Fig.11.