VEVOR QLDZ09 User manual

Technical Support and E-Warranty Certificate https://www.vevor.com/support
MECHANICAL MEASURING WHEEL
USER MANUAL
MODEL: QLDZ09
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
QLDZ09
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.

- 2 -
1. Product Introduction
Thank you for choosing our product , the mechanical measuring wheel is a
suitable tool for long distance measurement , Widely used in professional
surveying and mapping operations , road engineering , measurement and
evaluation of pipeline laying works , wire and cable works , construction survey
of garden scenery and golf course , measurement of distance location of traffic
accidents and the measurement of farmland construction management . It is a
worthy tool that adopts high-tech and humanized design , durable and
convenient .
2. Parts

- 3 -
3 . Technical Data：
Maximum Measuring Distance : 9999 m
Measurement Accuracy : ±0 . 5%
Minimum Display Value : 0 . 1m
Suitable Use Temperature : -10℃-45℃
Wheel Diameter : 12.5 in / 318 mm
4.How to Measure
Wall to Wall Measurement
Please measure the wheel on the ground with the back of your wheel up against
the wall. Proceed to move in a straight line to the next wall. Stop the wheel up
against the wall. Record the reading on the counter. The reading must now be
added to the diameter of the wheel.
Wall To Point Measurement
Place the measuring wheel on the ground with the back of your wheel up against
the wall. Proceed to move in a straight line to the endpoint. Stop the wheel with
the lowest point over the make Record the reading on the counter. The reading
must now be added to the Radius of the wheel.

- 4 -
Point to Point Measurement
Place the measuring wheel on the starting point of the measurement with the
lowest point of the wheel on the Proceed to the next mark at the end of the
measurement Record the reading on the counter. This is the final measurement
between the two points.
5 . Warning
1 . If you measure a straight line, walk straightly.
2 . Do not measure uneven surfaces. Otherwise, the accuracy cannot be
guaranteed.
3 . Do not use it in the rain for a long time.
4 . Do not use it in high-temperature environments or store it.
5 . If the display is dark and the battery sign appears, please replace the batteries
6 . Do not dispose of batteries freely; please recycle them at specified places.
7 . If you do not use this instrument long, remove the batteries and store them in a
dry and suitable place.

- 5 -
8 . Do not use it as a toy to avoid extra injury.
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW
2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place,
Rancho Cucamonga, CA 91730
REP
UK
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom
REP
EC
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
Made In China

TechnicalSupport and E-Warranty Certificate
https://www.vevor.com/support