VEVOR Z06-3S User manual

- 1 -
STAIR CLIMBING CART
Z06-3S
USR MANUAL
We continue to be committed to provide you tools with
competitive price.
"Save Half", "Half Price" or any other similar expressions
used by us only represents an estimate of savings you
might benefit from buying certain tools with us compared to
the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly
reminded to verify carefully when you are placing an order
with us if you are actually saving half in comparison with the
top major brands.

- 2 -
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appear- ance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
STAIR CLIMBING
CART

This is the original instruction, please read all manual instructions carefully
before operating. VEVOR reserves clear interpretation of our user manual.
The appearance of the product shall be subject to the product you received.
Please forgive us that we won't inform you again if there is any technology or
software updates on our product.
SAFETY INSTRUCTIONS
WARNING:
1. Please do not put it near flammable materials.
2. It is forbidden to carry people at any condition.
3. Please pay attention to safety when going up and down stairs.
4. Overload is strictly prohibited.
5. Don't move too fast when passing potholes areas.
Model and Parameters
Model
Z06-3S
Maximum Load(Flat ground)
35kg
Maximum Load(Climb Stairs)
15kg
Maximum Load (tray)
75kg
Maximum Load (seat)
100kg
Bag Volume
50L
Folded Size
8.2*45.1*82.2cm
Unfolding Dimension
53.5*43.5*96.5cm

Structure Diagram
1.Handle 2.Chair 3.Climbing Wheel 4.Cloth Bag

COMPONENTS
Frame(x1)
Wheel Set(x2)
Cloth Bag(x1)
Assembly and Use
1.Pull down the horizontal pipe as shown in the figure, and ensure that the
black plastic part is clamped into the rivet.
2.Remove the black protective sleeve at both ends of the shaft.

3.Press the n-type spring down toward the wheel center, and at the same
time, push it inward toward the axle, then release it, and pull the wheel
outward to snap it into the axle groove.
4.Open the seat face downward to make it look like the one shown in the
right-down figure.
5.Pass the frame through the middle of the bag and fix the Velcro at each
position.

Troubleshooting Instruction
Problem
Reasons
Solution
Wheel rolling is not
smooth
Insufficient lubrication
Add oil to lubricate the
rotating parts
Velcro is not sticky
The Velcro has
sundries
Clean the hair, thread, and
other sundries on the
Velcro
Maintenance
1.Avoid prolonged exposure to the sun to avoid aging.
2.Please clean the hair, thread, and other sundries on the Velcro in time.
3.Clean the dirt on the cloth bag in time.
Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON
OXFORDSHIRE ENGLAND OX14 5DH
EUREP GmbH
Unterlettenweg 1a, 85051
Ingolstadt, Germany
Manufacturer:Zhejiang Yongkang Haibo Leisure Bag Factory
Address:No.16 Changlong Road, lvnanzhai village, Longshan Town,
Yongkang City, Zhejiang Province
MADE IN CHINA
REP
EC
REP
UK

E-mail: [e-mail]