VEVOR BYCD-008 User manual

We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Technical Support and E-Warranty Certificate www.vevor.com/support
ROOF RACK USER'S MANUAL
MODEL: BYCD-008

- 1 -
BYCD-008
<Picture Only For Reference >
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Read the instructions carefully before using the device
ROOF RACK
BYCD-008

- 2 -
【Catalogue】
1. Technical parameters
2. Safety precautions
3. Product structure diagram
4. Instructions of use
5. Scope of application
6. Common fault analysis
1. Technical parameters
Brand
VEVOR
Model
BYCD-008
Maximum load bearing（lbs）
400
Product size （mm）
220×2060×560（single）
Product weight（kg）
10
2. Safety precautions
WARNING
Read and understand this entire manual before assembling, installing,
operating, or servicing this product. Failure to follow these warnings and
instructions can cause death, personal injury or damage to valuable
property.
Adhere to all Department of Transportation (D.O.T.) requirements when

- 3 -
using this product. Use ropes and tie downs (not included) to securely
hold all cargo in place.
Do not overload the Ladder Rack. Never exceed the maximum weight
capacity of 500 Lbs. (this is front and back rack combined capacity.)
Make sure the vehicle is in a safe place for loading ladders and other
cargo. Make sure the vehicle’s engine is OFF, with parking brake set,
before loading or unloading the Ladder Rack.
Do not use to hold or restrain human or animal weight in any manner.
When assembly is complete, check and test all vehicle systems
including lights and brakes; make sure no damage occurred during
product installation.
This Ladder Rack is designed to carry ladders, lumber, piping, rebar,
sports equipment and other long materials. Do not modify the Ladder
Rack and do not use this product for purposes that it was not designed
for.
Before and after each use, check to make sure that all hardware is
tightly secured. Regularly inspect for damage. If fraying or distortion is
found, immediately discontinue use.
Use common sense when working. Stay alert and concentrate when
setting up and using the Ladder Rack. Never work while under the
influence of alcohol, drugs or medications.
While assembling and using the Ladder Rack keep work area clean and
well lighted. Keep spectators and children out of the work area.
Dress appropriately. Never wear loose fitting clothing or jewelry when
working. Contain long hair, and keep hair, clothing and gloves away
from moving parts.
SAVE THESE INSTRUCTIONS

- 4 -
3. Product structure diagram

- 5 -
4. Instructions of use
a. First of all, fit the thin tube with the thick tube , adjust it to the
proper length of the car.
b. Insert the thin tube (thick tube) into the slot of the top half of support
bracket (red arrow)，align the hole position；
c. Assemble in the sequence of bolt - washer - the top half of support
bracket - thin pipe (thick pipe) - washer - nut.(Green arrow).
d. After installing the top half of support bracket, we will insert the upper
part into the lower part of the support bracket(red arrow).
e. In the lower half of support bracket，there are two adjustable height hole

- 6 -
positions，select the appropriate hole location for installation according to
your car，Assemble in the sequence of bolt - washer - the top half of
support bracket - the lower half of support bracket - washer - nut (blue
arrow)，the effect after assembly is shown in the right figure.
f. After installing the roof frame section，We install the baffle under the roof
frame on the side top of the van，use the hole on the baffle to connect with
the van ( right ).

- 7 -
g. Finally, screw the set screw into the hole of the thick pipe and tighten it,
so that the installation is completed.
5. Scope of application
Van roof
6. Common fault analysis
fault
phenomenon
failure cause
solution
Roof rack
deformation
The actual load weight
exceeds the maximum
product load
In use, the actual load
weight does not exceed
the maximum product
load

- 8 -
EU Importer: WAITCHX，250 bis boulevard Saint-Germain 75007 Paris
UK Importer: FREE MOOD LTD, 2 Holywell Lane, London, England, EC2A 3ET
Manufacturer: Chuzhou Baiyi Outdoor Equipment Co.,Ltd
Address: No.19 Yanggang Avenue , Shitan Industrial Park, Shizitown, China
MADE IN CHINA
REP
UK
EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON
OXFORDSHIRE ENGLAND OX14 5DH
REP
EC
EUREP GmbH
Unterlettenweg 1a, 85051
Ingolstadt, Germany

Technical Support and E-Warranty Certificate
www.vevor.com/support
MADE IN CHINA