Vezzio SM-1553N User manual

1
Vezzio
Stand Mixer
SM-1553N
Instruction Manual
Keep this manual for future reference and pass it on
with the equipment to any future users.

2
Technical Data
Model: SM-1553N
Rated voltage: AC120V 60Hz
Power consumption: 660W
General Safety Instructions
Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the
warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass
on the operating instructions.
Read all instructions.
To protect against risk of electrical shock do not put base in water or other liquid.
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities,
or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by
a person responsible for their safety. Close supervision is necessary when any appliance is used by or near children.
Children should be supervised to ensure that they do not play with the appliance.
Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before
cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
Avoid contacting moving parts.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in
any manner. Contact the manufacturer at their customer service telephone number for information on examination, repair,
or adjustment.
The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
Do not use outdoors.
Do not let cord hang over edge of table or counter.
Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of
injury to persons, or damage to the mixer.
Remove beaters from mixer before washing.
Household use only.
Special safety Instructions for this Machine
Only operate this machine under supervision.
Do not interfere with any safety switches.
Do not insert anything into the rotating hooks while the machine is working.
Place the machine on a smooth, flat and stable working surface.
Do not insert the mains plug of the machine into the power socket without having installed all the necessary accessories.

3
Overview of the Components
Main Components and Standard Accessories:
1
Output shaft
6
Dough hook
2
Rise knob
7
Beater
3
Speed knob
8
Whisk
4
Power Cord
9
bowl cover
5
Mixing bowl
Using the Mixing Bowl
1. In order to lift the arm, clockwise rotation the rise knob (2) . The arm will now move upwards.（FIG1）
2. Place the pot cover into its body. (FIG2)
3. Place the mixing bowl into its holding device(Step①) and turn the bowl clockwise until it locks into place(Step
②). (FIG3)
4. Mount the required utensil（Dough hook or Beater or Whisk）by inserting the top into the output shaft,
and turn anti-clockwise until it locks into place. (FIG4&FIG5)
1234
6
5
7 8
9

4
5. Now fill in your ingredients.
Do not overfill the machine - The maximum amount of ingredients should not exceed 2kgas far as possible。
6. Lower the arm using the rise knob (2). (FIG6)
7. Insert the mains plug into a properly installed AC120V 60Hz safety power socket.
8. Switch the machine using the speed knob to a speed between 1 and 10 (corresponding to the mixture).
9. For pulse operation (kneading at short intervals), turn the switch to the “PULSE” position. The switch has to be
held in this position according to the desired interval length. When the switch is released it returns automatically
to the “0” position.
10. After kneading/stirring turn the speed knob (3) back to the “0” position as soon as the mixture has formed a ball.
Then remove the mains plug.
11. Push the rise knob (2) downwards and the arm will be raised.
12. The mixture can now be released with the help of a spatula and removed from the mixing bowl.
13. The mixing bowl can now be removed.
14. Clean the parts as described under “Cleaning” .
FIG1 FIG2 FIG3
FIG4 FIG5 FIG6
Step 1
Step 2

5
Adjusting the Levels and Using the Dough Hook for not more than 2.0kg of Mixture
Use Picture Levels Time(Min) Maximum Remarks
Dough hook 1-4 3-5 1300g flour and
700g water
1 speed run for 30s,
the 2 speed run for
30s, and then the 4
speed run for 2 min to
3 min to form a cluster.
after continuous
operation of 10min
please stop working,
Beater 2-6 3-10 660g flour and
840g water
2 speed run for20s, the
6 speed run for more
than 2min40s
Whisk 10 3-10 3 egg whites
(Minimum)
Open 10 speed to run
3min above.
Troubleshooting
NO. Troubles Solution
1The machine doesn't work
·Check if the plug is in good contact with the socket.
·Check if the rise button spring back in place.
·Check if the machine works continuously more than
6-10 minutes, and wait until the motor cool down.
2
Noise in the mixing bowl when
working (the accessory scraped the
bowl)
·Check if the mixing bowl is properly installed.
·Check if the accessory installed properly on
machine.
3The pot cover doesn’t fit the mixing
bowl properly
·Check if the pot cover placed on the machine
properly.
·Check if the mixing bowl installed properly on
machine and locked correctly.
4The machine doesn’t work on certain
speed
·Check if the mark on speed knob correspond to the
speed silkscreen on housing.
·Rotate speed knob to 0 ,and re-check if the machine
works .

6
5
Movements when the machine
working
·Check if the anti-slip feet fall off.
·Check if the machine is placed on a smooth and flat
tabletop.
6
The rise button didn’t spring back in
place after installing the mixing bowl
and pot cover
·Check if the pot cover placed on the machine
properly.
·Check if the mixing bowl is properly installed.
Cleaning
Before cleaning remove the mains lead from the socket.
Never immerse the housing with motor in water!
Do not use any sharp or abrasive detergents.
Motor Housing
Only a damp rinsing cloth should be used to clean the outside of the housing.
Mixing Bowl, Mixing Equipment
CAUTION:
The components are not suitable for cleaning in a dishwasher. If exposed to heat or caustic
cleaners they might become misshapen or discolored.
Components that have come into contact with food can be cleaned in soapy water.
Allow the parts to dry thoroughly before reassembling the device.
Disposal
Do not dispose of the device in normal domestic waste.
Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility.
Observe the currently valid regulations. In case of doubt, consult your waste disposal facility.