VFLY V10 User manual

Contents1.TheDevice&Accessories.................................032.Functions.............................................................044.Assemblng the device ...........................................075.Imparare a guidare................................................086.DrivingInstructions................................................107.SafetyRecommendations.......................................148.Folding&Transportation.......................................169.DailyMaintenanceandStorage..............................1710.Parameters............................................2011.Presenceoftoxicandharmfulsubstances............2212.Warranty.................................................................233.How to use APP......................................................05...............
.....
02

1.The Device & Accessories
Vehicle
Accessories
--------------------------------------------------------------------------------------
Screws x 4 Hex Wrench Charging Adapter
03

Speedometer: Display the current speed of the scooter, as well as
to display error codes.
Modes: Three modes available. "ECO"for Energy saving mode,(smooth
acceleraƟŽŶƐƵŝƚable for beginners ,"D for Standard mode and"S"for
Sport mode(powerful only recommended for skilled riders).
"
Bluetooth: The icon indicates that the scooter has been successfully
connected to the mobile device.
Error: The wrench icon indicates that the scooter has detected an error.
Battery Level: The battery power is indicated by 5 bars, each
represenƟŶŐĂƉƉƌoximately 20% of a full battery.
Power Button: Press the button to turn the scooter on, and press and
hold the button for 3 seconds to turn the scooter off.
When the scooter is on,
double press to turn the headlight on/off.
Headlight:
When the scooter is on, press the button to switch between modes.
2. &ƵŶĐƟŽŶƐ
Display
04
Top speed of e scooter on 3 modes: “ECO” mode: top speed is 10KM/H
“D” mode: top speed is 20KM/H
“S” mode: top speed is KM/H
Speed lever
Control panel
Headlight
Folding mechanism
Wheel motor
Charging port
Signal
Brake handle
Clamp
Break lights
Brake disc
Stand
ĂƩĞƌLJĂŶĚĐŽŶƚƌŽůůĞƌ
compartment
Pull out the button (called a safety switch), make it stand
up, and then fold it
Before using the product, please keep the button (called
a safety switch) 90 degrees perpendicular to the pole

3.HOW TO USE APP
1. Download KCQ APP
Scan the barcode on the scooter or search “KCQ SCOOTER” in
App Store or APP Gallery.
2. Register
Use phone number to register.
05

4. Assembling the device
1).Įdž the steering rod and 2).Set handle bars vĞƌƟĐal;
open the parking bridge
Using hedžwrĞŶĐŚ in the ƉĂĐŬŝŶŐ 4. TesƟŶŐ the power switĐŚ aŌer ĮŶŝƐŚ
bodžto ฀ghten the ƐĐƌews assembling
on handle bar
07
Power Button
Press the button tŽƚƵƌŶƚŚĞƐĐooter on, and press and hold the button
fŽƌϯƐĞĐonds tŽƚƵƌŶƚŚĞƐĐooter offtŚĞŶƚŚĞƐĐooter is on, press the
button to switĐŚďĞtween modes, and double press to turn the headlight
on/off.
1

Open the cover connect the charger close the cover
Please wear helmet and knee 1 .Power on and check the battery led
pads when prĂĐƟĐĞ light
08
5. .Imparare a guidare
5 ) . Charging

2.Stand on pedal with one leg,
hit the ground with the other leg
3,.Step on the other leg when the scooter is moving, then press the accelerate
button (only accelerate when the scooter speed is beyond 5km/h)
4.loose the accelerate button when slow down. Energy recovery systems will
open itself to slow down. Press the leŌdisc brake ƟŐŚtly if want to brake
urgently.
5.lean your body leŌslightly to turn leŌ
lean your body right slightly to turn right.
And turn the handlebar slowly
09

6.Driving InsƚƌƵĐƟŽŶƐ
It is not recommendeddriving
on the rain It is recommend to slightly bend
knees to better adjust to a rough
road.If you are travelling on a
rough road,sƟĐŬ to low speed
(5-10km/h)
Entering into any room, elevator, etc.
Be careful not be injured by a door frame.
Please not add speed when descending a hill
10