Viatek Fruiti freeze ff01 User manual

Freeze

Fruiti

Instruction Manual

Carefully read this manual before using this appliance.

Ensure that you know how the appliance functions and how to operate it.

Model FF01

SAFETY PRECAUTIONS

To reduce the risk of re, electric shock or injury when

using any electric appliance, precautions should be made,

including but not limited to:

Use this unit ONLY as directed.

Always unplug prior to cleaning or performing any type of

service.

To clean the exterior of the unit base, use a damp cloth with

a mild solution or dishwasher safe detergent with water. Dry

completely.

DO NOT submerge base or power cord in water.

If device or power cord appears to be damaged, DO NOT

USE.

DO NOT operate unit where there are ammable or

combustible products or where other ammable vapors are

present.

Any attempt to open the base of the unit will void the

warranty.

Unplug and turn power off before assembling or

disassembling the unit.

Use only on a at, sturdy surface.

DO NOT insert any objects in the unit other than those

specied in the instructions.

This is not a toy. Children should only operate under careful

parental supervision.

To avoid overheating, do not use for more than 15 minutes at

a time. Allow Fruiti Freeze to rest for 5 to 10 minutes between

uses.

DO NOT touch any moving parts.

Plug into a polarized 120V AC outlet only. The plug on this

appliance is polarized, meaning that one prong is wider than

the other. If the plug will not t into your outlet, turn it over and

try again. If it still does not t, the outlet is not polarized. Use

another outlet or contact a certied electrician to modify the

outlet. DO NOT try to modify the unit’s plug.

Make sure unit is properly assembled and all moving parts

are locked into place before use.

Use only the plunger to shove fruit into the chute. Never place

hands or ngers into the chute unless the unit is unplugged

and fully disassembled.

Be sure that the power cord is clear of any danger of

someone or something tripping on it or pulling on it.

Be sure that all packing material has been removed,

including any material that may be inside the chute.

Be sure that there are no foreign objects inside the unit.

It is not recommended to use an extension cord with this

appliance.

CAUTION – To reduce the risk of electric shock, use indoors

only. See Instructions.

CAUTION – High voltage, keep out of reach of children.

Parts Diagram

Power Cord

Power Switch

Base

Chute Assembly

Cradle

Tray

Nozzle

Chute Assembly

Cover

Chute

Plunger

Auger

ASSEMBLY

4. Slide the chute

assembly cover over

the chute, insert

plunger into chute,

and insert tray in the

slot underneath the

nozzle at the bottom

of the base.

1. Insert the auger

into the bottom of

the chute, narrow

tip first.

2. Place the nozzle onto the chute over

the auger. Turn counterclockwise to

securely lock chute assembly together.

3. Insert the chute assembly

into the chute assembly

cradle on the base, fitting

the teeth of the chute

assembly into the slots

inside the cradle. Twist

counterclockwise to secure

chute assembly to base.

USE

• When using the Fruiti Freeze for the rst time, be sure

that all packing material has been removed, including

any material that may be inside the chute. Also, wash the

plunger, chute, auger, nozzle and chute assembly cover in

warm, soapy water, rinsing thoroughly.

• Begin with fruit that has been completely frozen. Allow to

thaw slightly. Thaw time depends on type and size of fruit.

Berries should thaw for around ve minutes, while larger

fruit such as peaches may need to thaw 15-20 minutes.

• Place the unit on a dry, stable surface before use.

• Be sure the power cord is tucked away so that nothing can

pull on it. Be sure the plug and outlet are a safe distance

from any water source. Plug in the unit.

• Remove the plunger from the chute and place a container

for your treat on the tray and underneath the nozzle.

• Turn the unit on.

• Slowly insert frozen fruit into the chute without overlling.

• Do not place thick skins, tough cores, fruit pits, ice, or

honey into the Fruiti Freeze. Fruits with thick skins, tough

cores and pits must have these removed before being

placed in the unit. This is most easily done before the fruit

is frozen.

• Use the plunger to rmly push the fruit through the chute.

Applying too much pressure can damage the unit, so apply

just enough rm pressure to feed the fruit through the

auger.

• You may add sugar, seasonings, and spices along with the

fruit so that the ingredients are well blended with the fruit.

• There are three ways you can make a frozen treat with

multiple types of fruit:

1. Add the fruit one type at a time. The avors and colors

will be separated, creating a rainbow effect.

2. Add the different types of fruit alternately. There will

still be some color separation, but the avors will be

blended better.

3. Once you’re nished grinding the fruit, stir together with

a spoon. There’s no color separation, but the avors will

be perfectly blended.

• Repeat until you’ve created the desired amount of frozen

treats. However, to avoid overheating, do not use for more

than 15 minutes at a time. Allow Fruiti Freeze to rest for 5 to

10 minutes between uses.

Note: Slight burning odors are common when rst using new

appliances. However, if the burning smell persists or increases,

of if you see smoke coming from the appliance, turn off, unplug

immediately and stop use.

• If the unit stops working, there may be a piece of fruit

caught in the chute assembly. DO NOT place ngers

inside of chute while the unit is plugged in. Turn unit

off, unplug the power cord and disassemble the chute

assembly. You should then be able to clear the clog. Rinse

and dry chute assembly components (NOT the unit base),

reassemble, reattach to the base, plug in, turn on and

begin making frozen treats again.

• Tough skins, tough cores, and hard pits must be removed

from fruits before freezing. Seeds that are easily crushed

and thin skins may be put through the auger, but also may

be removed prior to freezing if desired.

MAINTENANCE

• Unplug the Fruiti Freeze before cleaning and

disassembling.

• Before and after each use, wipe the unit off with a damp

(not dripping), non-abrasive cloth. When nished, dry

thoroughly.

• Remove chute assembly cover, disassemble the chute

assembly, and remove the tray.

• Wash all parts (excluding the base and power cord) by

hand in warm water with a non-abrasive soap and a non-

abrasive cloth or sponge. Rinse and dry thoroughly.

• Fruiti Freeze parts are not dishwasher safe. Hand wash

only.

Read Instructions

Before Operating MADE IN

CHINA

For Canada customer service call 423.402.9010 or visit us online at viatekproducts.com

For customer service call 888.7.VIATEK or visit us online at viatekproducts.com

Pour le service a la clientele appelez le 888.7.VIATEK ou visitez viatekproducts.com

Para servicio al consumidor llame al 888.7.VIATEK o visite viatekproducts.com

Protect your product for 1 year beyond our standard warranty with the Viatek No Question Protection

Plan. With the Extended Warranty there are no return shipping charges, product will be replaced or

reimbursed with no deductible & your product is protected 100% from any mechanical or electrical

failures caused by power surges or manufacturer’s defects. Order online at viatekproducts.com today.

PATENT PENDING

REV-Model No.

DO NOT DISPOSE OF BATTERIES IN FIRE. ALWAYS DISPOSE OF BATTERIES PER STATE & LOCAL GUIDELINES

FF01 09/06/13

ADDITIONAL CAUTION

DO NOT attempt to repair unit if damaged.

DO NOT try to disassemble the unit base. If you have

questions or concerns, please contact

cs@viatekproducts.com or call 423-402-9010.

Misuse of this product can cause serious harm.

Please use only as directed in this manual.