VibraPEP Breathe Easy User manual

www.vibrapep.com
QUICK START: Instructions for Use
For Use with Nebulizer
1Visually
inspect the
device for
damage
AAssemble the nebulizer as
described in the nebulizer
supplied Instructions For
Use
BConnect the
Valved Tee
Adapter†
and
mouthpiece
CAssemble
Nebulizer
to the
22mm
connector
of the
VibraPEP
DTurn on the nebulizer and
inhale the medication
through the mouthpiece
and exhale through the
VibraPEP as in step 4
2Insert the
Mouthpiece
into the
Therapy
Selector
VibraPEP
Oscillatory PEP
Therapy System
(OPEP)
These are abbreviated instructions for use. Always read the full instructions that are
packaged with the VibraPEP OPEP Therapy System or available at VibraPEP.com
† The Valve Tee Adapter is an optional accessory
part # 12218
3Inhale deeply
through your
nose, then
hold your
breath for 2
to 3 seconds.
4
5
Exhale through
the VibraPEP
for 3 to 4
times longer
than your
inhalation.
Repeat this process for 15
breaths or as instructed by your
healthcare provider.
6Perform 2 to 3 “huff coughs” to
clear the airway.
2-3 sec.
3-4x
with Nebulizer
Breathe Easy
LIT-0197 Rev. A 2020-10-09

www.vibrapep.com
QUICK START: Cleaning Instructions
These are abbreviated Cleaning Instructions. Always read the full instructions that are packaged with the
VibraPEP OPEP Therapy System or available at VibraPEP.com
Reassemble
Disassembly
1Remove the
Mouthpiece
and End
Cap
2Rotate
past
position 1
3Remove Therapy
Selector and Valve
from Tube
4
1
234
Insert Cleaning
Aid into Valve
during rinse
SOAP & WATER
BOILING WATERSOAP & WATER DISHWASHER AIR DRY
OvernightTop Shelf10 min.
Cleaning Options
www.vibrapep.com
Breathe Easy
LIT-0197 Rev. A 2020-10-09