Victorio VKP1009 User manual

Victorio™ Cherry Stoner

© 2008 Copyright Victorio Kitchen Products, Inc.
All Rights Reserved.
Shaft
Body
Suction Base
Suction Lever
Screws
Spring
Knob
Rubber Gasket
Pit Container
Tray

ASSEMBLY INSTRUCTIONS
1. Wash all parties in hot soapy water. Lubricate shaft with vegetable oil
and assemble as illustrated.
2. Slide body bottom into grooves on suction base. Secure body to base
with two hand-tightening screws. Insert the shaft up through the
bottom of the shaft opening, slide the spring over the shaft and attach
knob.
3. Place on a smooth counter top of table and swing the suction lever over
to the left. Make sure the rubber gasket and plastic pit container are in
position.
4. Place cherries in tray, then press sharply down on the plunger and
release. e pit is ejected into the plastic container, while the whole
seedless cherry falls into a waiting bowl.
After use, wash and dry thoroughly, lubricate shaft with vegetable oil, and
store in the box for the next use.

KEEP THESE INSTRUCTIONS FOR FUTURE USE.
PARTS & SERVICE
Cherry Stoner – Model No. VKP1009
For replacement parts or service, contact:
Victorio Kitchen Products
1804 Sandhill Road
Orem, Utah 84058
Phone: [phone]
E-Mail: [email protected]