Victorio VKP1024 User manual






1
Important safety instrucƟons. Read carefully to
reduce the risk of personal injury or damage to
appliance.
Read all instrucƟons carefully before using.
WARNING!
1.Neverputhandsorforeignobjectsinhopperorinputchute
ofgrainmill.
2.Onlyghtentheadjustmentknobbyhand.Neverusetools
ofanykindtoghtentheadjustmentknob.Use of tools to
Ɵghten the adjustment knob will damage the mill and void
the warranty. 
3.Neveroperatethemillifanypartsaremissingordamaged.
Alwaysmakesurethemillisclampedsecurelytoasturdy
surfacebeforeusing.
4.Applianceisnotintendedforusebychildrenclosesupervi‐
sionisnecessarywhenapplianceisusednearchildren.
5.Onlyusegrainmillwithelectricmotoraachmentmodel
VKP1024‐M(oponalaccessory).
6.Forhouseholduseonly.







2
Copyright © 2012 Victorio Kitchen Products. All Rights Reserved.
YOUR DELUXE GRAIN MILL SHOULD
INCLUDE EVERYTHING
ILLUSTRATED BELOW.



3
Congratulations
Your purchase of the Victorio®Grain Mill is both a money saving invest-
ment and a giant step towards healthier, more flavorful home baking and
cooking. You’ll enjoy the natural, wholesome goodness and flavor of
home ground ingredients prepared fresh and free from all the usual pre-
servatives and additives contained in commercially processed foods. Your
Victorio®Grain Mill will become a valuable tool in your kitchen and pro-
vide years of trouble free service.
Clean Before Using
Dismantle the grain mill and wipe off all parts with damp cloth, removing
any residue from the manufacturing and packaging. Be careful not to lose
the small nylon tip on the adjuster knob during disassembly & reassembly.
Assemble Hopper
Assemble hopper by lining up the sides of the hopper and firmly pressing
them together until both sides are fully touching and no gaps appear on
the sides. After correct assembly the hopper should fit snug on the top of
the grain mill. If the hopper doesn’t fit on the top of the grain mill, the
halves have not been pressed far enough together.



4
Setup Instructions
Mount firmly on a sturdy table or counter top and secure with clamp
screw. See mounting example diagrams below:
Correct Mounting:
Incorrect Mounting:



5
Operating Instructions
Select desired texture by turning the adjustment knob clockwise for fine
milling and counterclockwise for coarser texture. Turn adjustment knob
by hand only. For the finest setting possible turn adjustment knob fully
clockwise until it stops, then back counter-clockwise 1/4 turn (to
prevent over tightening). Then add grain and begin milling. If you desire a
more coarse texture turn the adjustment knob counterclockwise a turn or
two until output is the desired coarseness. Do not operate mill with adjust-
ment knob tightened all the way clockwise as this may damage milling
cones.
Tips
1. To get the flour output of the grain mill to be the very finest you must
start with the grain mill empty of any grain and the adjustment knob
turned fully clockwise until it stops, then adjustment knob back coun-
ter clockwise 1/4 turn.
2. The grain mill can only be adjusted coarse after grinding has begun.
To adjust fine you need to empty the mill of any grain before turning
the adjustment knob to a more fine setting. For this reason we suggest
the grain mill always start adjusted to the finest setting when starting.
3. While designed primarily for small grains like wheat or rice. The grain
mill can grind most dry non-oily food or grain without damaging the
milling cones. Some things grind better than others. If in doubt try it!
4. Some larger items such as corn or beans may need to be chopped into
smaller pieces before the grinder will accept them. This can be done
easily with a blender or food chopper.
5. The flow into the milling cones is gravity fed. This can be problematic
for very light items (rolled oats or rosemary for example). We do not
recommend using the grain mill with these types of items.



6
Please note:
The adjustment knob has a nylon tip that helps keep the milling cone
adjustment accurate. This must be in place for the adjustment settings of
the grain mill to work correctly. Under normal conditions the tip
should last the life of the grain mill. In the event that the tip receives
unforeseen damage or is missing (to prevent this we suggest not loaning
the grain mill) please contact customer service for a replacement.
Cleaning
Disassemble and carefully handle small parts so they don’t get lost. The
grain mill can usually be cleaned with a brush or dry cloth. If thorough
cleaning is necessary, hand wash in warm (not hot) water and dry all
parts thoroughly. Do not allow parts to soak before washing. Do not
clean any part of the grain mill in a dishwasher.



7
GRAIN MILL TROUBLESHOOTING GUIDE
PROBLEM SOLUTION
Grainmillrocksfromsidetoside
whenthehandleiscranked.
Grainmillisnotproperlymounted
andclamped.Seepage4for
mounnginstrucons.
Iamgrindingcorn,beansorsimilar
sizeditemandverylileornothing
seemstocomeout.
Largersizeditemsneedtobepre‐
choppedintosmallerpiecesbefore
millwillacceptthem.Useablender
orfoodchoppertocutintosmaller
pieces.Seegrindingpsonpage5.
Thegrainmillonlygrindscoarseno
maerwhatIdo.
Makesuretheadjustmentknobhas
thenylonponit(seepage6).For
adjustmentinstruconsseepage5.
Ifproblempersistspleasecontact
customerservice.
Iamtryingtogrind(X)anditdoesn’t
seemtobeworking.
Seepage5forgrindingps.Ifprob‐
lempersistspleasecontactcustomer
service.
GrainMillisveryhardtoturneven
withnothinginit.
Carefullyfollowadjustmentproce‐
dureonpage5makingcertaintoturn
knobback1/4turnaerghteningall
theway.Failuretodosocanresultin
damagetothemillingcone.



8
OverloadBreaker
On/OffSwitch
MotorLatch
Cord
Vent
Vent
VICTORIO DELUXE GRAIN MILL MOTOR
VKP1024-M (optional)
DriveSha
 Designed to be energy efficient and durable; plus it’s easy to
install and use.
 Low speed/low heat milling locks in vital nutrients that are
destroyed by high speed and high heat methods.
 Energy efficient high torque motor combined with all metal
gears provide for years of reliable service and keeps your power
bill low.
 Very low power consumption (60 Watts max) allows for worry
free use with backup emergency power such as generators or
battery powered electrical inverter. It’s also great for use with
off-the-grid electrical production or other situations where
every watt counts.
 Motor can be installed or removed in just a few seconds.



9
INSTRUCTIONS FOR ELECTRIC MOTOR VKP1024-M
*Electricmotor(VKP1024‐M)isanoponalaccessoryandissoldseparately.
IMPORTANT SAFETY INSTRUCTIONS PERTAINING TO A
RISK OF FIRE, ELECTRIC SHOCK or INJURY TO PERSONS.
Read all instrucƟons carefully before using.
WARNING
Connecttoaproperlygroundedoutletonly(groundinginstruconsonpage10).
Donotuseelectricaloutletadapterswiththisappliance.
Forhouseholduseonly.
Donotuseoutdoors.
Donotoperateifcordorplugisdamaged.
Donotunplugbypullingoncord.Tounplug,grasptheplug,notthecord.
Unplugfromoutletwhennotinuseandbeforeservicingorcleaning.
Donotimmersemotorinwaterorotherliquid.
Applianceisnotintendedforusebychildrenclosesupervisionisnecessarywhen
applianceisusednearchildren.
Donotputhandsorforeignobjectsingrainhopperwhilemotorisinstalled.
Donotcovervenlaonholesontopandboomofmotor.
Beforeinstallingorremovinggrainmillelectricmotorturntheswitchtotheoff
posionandremoveplugfromoutlet.
Makesurethemotorisaachedtothegrainmillproperlybeforeoperang
(installaoninstruconsonpage11).
Onlyuseelectricmotor(modelVKP1024‐M)withVictorioDeluxeGrainMill
(modelVKP1024).
Donotdisassemble.Mustbeservicedbyaqualifiedtechnicianonly.



10
GROUNDING INSTRUCTIONS
Thisappliancemustbegrounded.Intheeventofmalfunconorbreakdown,
groundingprovidesapathofleastresistanceforelectriccurrenttoreducethe
riskofelectricshock.Thisapplianceisequippedwithacordhavinganequip‐
ment‐groundingconductorandagroundingplug.Theplugmustbepluggedinto
anappropriateoutletthatisproperlyinstalledandgroundedinaccordancewith
alllocalcodesandordinances.
DANGER –Improperconneconoftheequipment‐groundingconductorcan
resultinariskofelectricshock.Theconductorwithinsulaonhavinganouter
surfacethatisgreenwithorwithoutyellowstripesistheequipment‐grounding
conductor.Ifrepairorreplacementofthecordorplugisnecessary,donotcon‐
necttheequipment‐groundingconductortoaliveterminal.Checkwithaquali‐
fiedelectricianorservicemanifthegroundinginstruconsarenotcompletely
understood,orifindoubtastowhethertheapplianceisproperlygrounded.Do
notmodifytheplugprovidedwiththeappliance–ifitwillnotfittheoutlet,
haveaproperoutletinstalledbyaqualifiedelectrician.



INSTRUCTIONS FOR USING OPTIONAL MOTOR
The Victorio Deluxe Grain Mill has an optional electric motor available
for it. Visit our website www.VictorioKitchenProducts.com
HOW TO ATTACH MOTOR
Use crank handle to position grain mill shaft so motor shaft can fit in.
See diagram below
Once shaft is positioned correctly insert motor shaft into grain mill shaft
and see diagram below for how to attach motor.
11
Shaft notches
should line up
with pins.
Make sure the motor
latch is secured to
the grain mill before
operating the motor!
Twist
Counter
Clockwise



HOW TO REMOVE MOTOR
See diagram below
Motor may be tight to remove so you may need to rock it up and down as
you pull back. See diagram below.
12
Twist
Clockwise



13
Resettable Circuit Breaker
The motor includes a resettable overload breaker to prevent risk of
personal injury or grain mill damage.
Instructions for resetting overload breaker: Turn switch to off position
and unplug motor from outlet. Remove motor from grain mill. Wait 10
minutes for motor to cool and then manually reset breaker by pressing in
on the top of breaker until it locks.
Important: Before reinstalling motor check grain mill operation by in-
stalling the handle and manually operating the grain mill to make sure
milling cone isn’t jammed or overly hard to turn. If grain mill is jammed
adjustment knob and milling cone and shaft must be removed to inspect
and any clear obstruction.
Caution: If breaker trips immediately after plugging in or turning on do
not bypass breaker and do not use motor. Contact Victorio customer
service.

Motorspecificaons:120VAC,60Hz,60wa.
ONOFF
Switch
Breakerthathas
beentripped
Breakerinnormal
operangposion
OverloadBreaker



MOTOR TROUBLESHOOTING GUIDE
PROBLEM SOLUTION
CannotaachmotorReviewpage11abouthowtoaach
motor,includinghowtocorrectly
alignmotorshawithgrainmillsha
CannotremovemotorReviewpage12abouthowtoremove
motor.Somemesmotorshacan
getstuckorbedifficulttoremovesee
diagramonpage12
Motoristurningbutgrainmillisnot
grinding.
Largersizeditemsneedtobepre‐
choppedintosmallerpiecesbefore
millwillacceptthem.Useablender
orfoodchoppertocutintosmaller
pieces.Seegrindingpsonpage5.
Somemesgraincanbecomestuck
andwillnotflowintogrindingcham‐
ber.Taponthesideofthebodybe‐
lowhopperusingtheplascpartof
thecrankhandle.
Motorstopsturningorlocksupwhen
Iamusingit.
Somegrainsespeciallypopcornare
veryhardandwillbedifficultto
grind.Ifthemotorisstoppingwhen
youaregrindingitmeansitisbeing
overloadedandyouwillneedtopre
chopthegrain.
MotordoesnotturnonRemovemotorfromgrainmill.
Makesureitispluggedintoalive
poweroutletandthatthecircuit
breakerabovetheswitchontheside
ofthemotorisnottripped.Seepage
13fordetailsaboutcircuitbreaker.
ChecktoseethatswitchisintheON
posion.
14



Product Warranty
Victorio Kitchen Products warrants the grain mill for two (2) years and
the optional motor for one (1) year from the date of original purchase.
from defects or failures in the material and workmanship.
All warranty claims must be accompanied by a proof of purchase and are
only valid if the appliance has been operated and maintained in conformity
with the provided instruction manual.
Any failed part of the appliance will be repaired or replaced without
charge at Victorio Kitchen Products’ discretion. This warranty applies to
household use only.
This warranty is null and void, as determined solely by Victorio Kitchen
Products if the appliance is damaged through accident, misuse, abuse,
negligence or if the appliance is altered in any way.
THIS WARRANTY IS IN LIEU OF IMPLIED WARRANTIES, IN-
CLUDING WARRANTIES OF MERCHANTABLITY, FITNESS FOR
PARTICULAR PURPOSE, PERFORMANCE, OR OTHERWISE,
WHICH ARE HEREBY EXCLUDED. IN NO EVENT SHALL
VICTORIO KITCHEN PRODUCTS BE LIABLE FOR ANY DAM-
AGES, WHETHER DIRECT, INDIRECT, INCIDENTAL, FOR-
SEEABLE, CONSEQUENTIAL OR SPECIAL ARISING OUT OF
OR IN CONNECTION WITH THIS APPLIANCE.
If you think this appliance has failed or requires service within its warranty
period please contact:
Victorio Kitchen Products Customer Service Department
www.VictorioKitchenProducts.com
Call 866-257-4741
or
E-mail [email protected]
Return shipping fees are non-refundable. A receipt proving original pur-
chase date will be required for all warranty claims. Handwritten receipts
are not accepted. Victorio Kitchen Products is not responsible for returns
lost in transit.
© Copyright 2012 Victorio Kitchen Products, Inc. All rights reserved