Videosec 24FE(PoE)+2GE+2G SFP User manual

User Guide
16FE(PoE)+2GE+2G SFP Colorful LCD Display PoE Switch
24FE(PoE)+2GE+2G SFP Colorful LCD Display PoE Switch
PS24FE+2GE+2SFP

- 2 -
Package Contents
Check the following contents of your package:
 PoE Switch x 1
 User’s Manual x 1
 Power Cord x 1
 Accessories(hanging ears*2, Rubber Feet*4, screw*8)
If any part is lost and damaged, please contact your local agent immediately.
1. Introduction
Thank you for choosing this PoE Switch. The 16/24FE(PoE)+2GE+2G SFP LCD Display PoE Provides 16(24)-
10/100Mbps PoE RJ45 Port have 2-Gigabit RJ45 port and 2-Gigabit SFP Slot. Its PoE ports can automatically
detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PD). The electrical
power is transmitted along with data in one single cable allowing you to expand your network where
there are no power lines or outlets, where you wish to fix devices such as AP, IP Cameras or IP Phones, etc.
The LCD not only can display the PoE work status, accurate judgment port of load, can also help customer
and engineer timely discover and solve the network failure,improve work efficiency and quality.
Port Feature
Model
10/100Mbps
RJ45 Port
Gigabit RJ45
Port
Gigabit SFP
Port
LCD Display
PSE Port
16FE(PoE)+2GE+2G SFP
Port1~16
Port17~18
Port19~20
Support
Port1~16
24FE(PoE)+2GE+2G SFP
Port1~24
Port25~26
Port27~28
Port1~24

- 3 -
2. Hardware Description
2.1 Front Panel
The Front Panel of the PoE Ethernet Switch Consists of Ethernet Ports. The LCD Display and LED indicators
are also located on the panel

- 4 -
LED indicator
LED
Color
Function
PWR
Green
Off: No Power supply.
Light: Indicates the switch has power.
LNK/ACT
Green
Off: No device is connected to the corresponding port.
Light: Indicates the link through that port is successfully
established at10/ 100Mbps.
Blink: Indicates that the Switch is actively sending or
receiving data over that port.
PoE
Orange
Off: No PoE powered device (PD) connected.
Light: There is a PoE PD connected to be port, which
supply power successfully.
Blink: Indicates port abnormal power supply.
Speed
Green
Off: No connection or 10Mbps
Light: Indicates the link through established at 1000Mbps.
Orange
Off: No connection or 10Mbps
Light: Indicates the link through established at 100Mbps.
Rear Panel
The rear panel of the PoE Switch indicates an AC inlet power socket, which accepts input power from
100 to 240V AC, 50/60HZ.
Grounding
column AC Power
port

- 5 -
LCD Features
The PoE Switch with the fun on of the LCD display and PoE. The LCD can display the working
cond n of PoE port not only, s ll can accurately show the state of each port, such as: Output power,
Overload, Short circuit, Light load, Low voltage, Over voltage,High temperature, and so on...
After Starting the screen not only such visible on the basis of three generations in the second generation
increases the color logo, according to the menu button, switch mode, bandwidth display and warning, PD type, PSE
power fine-tuning and priority, PoE port switch control, LCD switch. Enhance the LCD viewing angles, smart fan
control, language selection and the function of the factory Settings, in turn, as shown in the figure below: See the
operation instructions of the screen concretely.

- 6 -
3. Installation the Switch
This part describes how to install your Ethernet Switch and make connec ons to it. Please follow the
following instru ns in avoid of incorrect installa on causing device damage and security threat.
Before cleaning the switch, unplug the power plug of the switch first. Do not clean the switch with wet
cloth or liquid;
Do not place the switch near water or any damp area. Prevent water or moisture from entering the
switch chassis;
Do not place the switch on an unstable case or desk. The switch might be damaged severely in case of a
fall;
Ensure proper ven la on of the equipment room and keep the ven vents of the switch free of
obstruc on;
Make sure that the opera ng voltage is the same one labeled on the switch;
Do not open the chassis while the switch is opera ng or when electrical hazards are present to avoid
electrical shocks.
Desktop Installation
Install the Switch on a desktop, please attach these cushioning rubber feet provided on the bottom at
each corner of the Switch in case of the external vibration. Allow adequate space for ventilation
between the device and the objects around it.

- 7 -
3.2 Rack mountable installation
The switch is rack-mountable and can be installed on an EIA-19 inch equipment rack. To do this, first,
please install the mounting brackets on the switch’s side panels (one on each side), secure them with
the included screws, and then use the screws provided with the equipment rack to mount the switch on
the 19 inch rack.

- 8 -
3.3 Turn on the switch
Please plug the power supply into the switch, the internal power system of the switch can Auto-regulate the
working power according to the actual input power. When the switch is power on, the power indicator will be
light on the front panel of the switch shines.
Note: Please confirm the voltage is correct before power on, otherwise the switch will be damaged.
(There is a power supply socket on the back panel of the PoE Ethernet switch. The power input is:
100V-240Vac, 50/60Hz.)

- 9 -
Specifications
Model
16FE(PoE)+2GE+2G SFP
24FE(PoE)+2GE+2G SFP
Standard
IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3az, IEEE802.3x,
IEEE802.3af, IEEE802.3at
Network -
Media(Cable)
10BASE-T: UTP category 3,4,5 cable (≤100m)
100BASE-TX: UTP category 5 cable (≤100m)
1000BASE-T: UTP category 5e cable (≤100m)
1000BASE-X: MMF or SMF SFP module(Optional)
LCD Display
Support
MAC Address Table
8K, Auto-learning, Auto-aging
Transfer mode
Store-and-Forward
Frame Forward Rate
10Base-T: 14881pps/Port
100Base-TX: 148810pps/Port
1000Base-T/X: 1488095pps/Port
Switching Capacity
11.2G
12.8G
Dimensions (L*W*H)
440*232*45 mm
Fan
Fan
Power Input
AC: 100~240V, 50/60Hz
Power output
55V/5.6A, 55V/7.2A(Optional)
PoE Port
Port1~16
Port1~24
PoE Power on RJ45
port: Mode A 1/2(+),3/6(-)
PoE Power Output
Voltage: 55V DC Power: 32W(Max)
PoE Power Budget
300W/380W(According to the power)
PoE Power total
330W/420W
Temperature
Operating Temperature: -10°C ~ 60 °C (32 °F ~104°F )
Storage Temperature: -40 °C ~ 70 °C (-40 °F ~158°F )
Humidity
Operating Humidity: 10% ~ 90% non-condensing
Storage Humidity: 5% ~ 90% non-condensing