Videosec SS-B User manual

● RF smart switch with relay output, without dimming function.
● Suitable to insert standard panel bottom box.
● Adopt 2.4GHz wireless technology, remote distance up to 30m.
● One RF switch can accept up to 10 remote control.
● Great compatibility with a variety of dimming remote.
● To switch single color LED lamps, traditional incandescent and halogen lights.
● Connect with external push switch optional.
Feature
User Guide
Technical parameter
RF Smart AC Switch & Push Switch
Dimension
52.00 mm
52.00 mm
26.00 mm
Match key
AC inputAC output
Interface specification
RF Remote
Match guide
1. Match: Short press match key of the RF switch, within 5s, press any zone on/off key of the remote.
2. Delete: Long press match key of the RF switch for 5s, delete all matched remote.
Model Input voltage Output current Output power
SS-B 100-240VAC 1.5A 150-360W
Output voltage
100-240VAC
Available RF remote
RU4 RU8 PF1-2
ON OFF
ON OFF
ON OFF
OFF
ON OFF
All
ON All
1
2
3
4
12
43
56
87
OFF
All
ON All
4 zone remote 8 zone remote 2 zone remote
-+
Push -Key
External Push Switch
2.4G
Uin=100-240VAC
Iin=1.5A
Uout=100-240VAC
Iout=1.5A
Pout=150 360W-
Temp Range:-30℃~+55℃
● Use Match key
1. Match: Switch off the power, then switch on power again,
short press on/off key 3 times on the remote quickly within 5s after power on, the link is done.
2. Delete: Switch off the power, then switch on power again,
short press on/off key 5 times on the remote quickly within 5s after power on, the unlink is done.
● Use Power-up
The SS-B / SS-C is a RF switch designed with 100-240VAC input and 100-240VAC output, to switch on/off single
color LED lamps, traditional incandescent and halogen lights. The RF switch comes with 1 channel and maximum
1.5A or 3A output and can be compatible with a variety of RF series remote controls. Push function is available
while the RF switch is connected with a push switch.
There are two kinds of method to match the RF switch with the RF remote.
SS-C 100-240VAC 3.0A 300-720W100-240VAC

1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain.
3. Good heat dissipation will prolong the working life of the controller, please ensure good ventilation.
4. Please check if the output voltage of any power supplies used comply with the working voltage of
the product.
5. Ensure all wire connections and polarities are correct and secure before applying power to avoid
any damages to the LED lights.
6. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
Safety information
Malfunctions analysis & troubleshooting
Malfunctions
Causes Troubleshooting
No response
from the remote
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the remote.
1. Replace battery.
2. Reduce remote distance.
3. Re-match the remote.
1. No power.
2. Wrong connection or insecure.
1. Check the power.
2. Check the connection.
No light
Wiring diagram
Non-dimmable LED light
100-240VAC
Push Switch (Optional)
Short press,turn on light.
Short press again,turn off light.
-+
Push -Key
2.4G
Uin=100-240VAC
Iin=1.5A
Uout=100-240VAC
Iout=1.5A
Pout=150 360W-
Temp Range:-30℃~+55℃
Note: The upper Push-key input port can not connect any AC or DC power supply,
otherwise, the product will be damaged.
HD
Distributor:
Euro Tech Corporation Ltd.
6724 Szeged, Hungary
Üstökös str. 12/b
Web: www.videosec.com