Videosec DALI-424-GC User manual

Dimensions: L48×W28×H14(mm)
Package Size: L50×W40×H30(mm)
Weight(G.W.): 32g
Interface Protocol: DALI (IEC62386)
Power Supply: DALI Bus
Current: ≤ 8mA (static)
Working Temperature: -30℃~55℃
Group Mode：0-15
Main Characteristics
Dimensions Installation Instruction
Address value=the total value of (1-4),
to get the place value when in “on” position,
otherwise will be 0.
Set group address via dip switch:
PC
Small size, easy installation.
No external power supply, simply connected to the DALI bus.
Low voltage operation, safe and reliable.
Applicable to home, oce, hotel, supermarket etc.
Ordinary reset switch can achieve DALI intelligent control.
plastic shell.
Hide this product in the switch box
DALI Group Push Switch
1
DALI-424-GC Group

2
Connections
Update Time: 2015.06.15
1. Disconnect the power supply of all devices on the DALI bus before installing.
Installation:
Note: This product is only suitable for the reset switch. It can be Key 1, Key 2, Key 3 or Key 4.
If the switch failure occurs after pressing,
1. If the connection is correct;
2. Make sure to use the reset switch;
3. Check if the DALI power output is stable.
please check:
Troubleshooting:
3. Open the shell, set up the address.
2. Connect according to the above wiring diagram. DALI bus does not distinguish plus-minus polarity. Meanwhile connected
to the reset switch.
Group
Short Press: Press and release in 1 second to turn on/off.
Long Press: Press for more than 1 second for dimming, first long press is increase brightness,
release and long press again is decrease brightness.
HD
Distributor:
Euro Tech Corporation Ltd.
6724 Szeged, Hungary
Üstökös str. 12/b
Web: www.videosec.com