ViewSonic WPG-350 Firmware update

WPG-350 Utility software installation – Windows 7®
- 1 -
Windows 7 is a registered trademark of Microsoft Corporation. All other corporate names and trademarks mentioned herein are the property of their
respective companies. Copyright ©2010 ViewSonic Corporation.All rights reserved.
1. Boot up the device and the instruction page (startup page) will display on the monitor.
Figure1
2. Hover mouse pointer over Wireless Connection icon located in the Tray area to display available
Wireless Network Connections. From the menu click WPG-350 Wireless Network Connection
and click Connect button to connect (see figure 2). Connection will show an exclamation –
this is ok (figure 3).
Figure2 Figure3

WPG-350 Utility software installation – Windows 7®
- 2 -
Windows 7 is a registered trademark of Microsoft Corporation. All other corporate names and trademarks mentioned herein are the property of their
respective companies. Copyright ©2010 ViewSonic Corporation.All rights reserved.
3. Open Internet browser. Note: If using Internet Explore 8 turn off SmartScreen Filter.
a. To turn off SmartScreen filter in Internet Explorer 8 click Safety -> SmartScreen Filter ->
Turn off SmartScreen Filter… click “OK” to confirm (see figure 4 and 5).
Figure4
Figure 5
4. In the web browser address field enter “10.30.40.1” and press enter.

WPG-350 Utility software installation – Windows 7®
- 3 -
Windows 7 is a registered trademark of Microsoft Corporation. All other corporate names and trademarks mentioned herein are the property of their
respective companies. Copyright ©2010 ViewSonic Corporation.All rights reserved.
5. Click “For Windows” button to download utility program from WPG-350.
Figure 6
6. Click Run button to download and install utility.
Figure 7
7. Click Run button to confirm Security Warning.
Figure8

WPG-350 Utility software installation – Windows 7®
- 4 -
Windows 7 is a registered trademark of Microsoft Corporation. All other corporate names and trademarks mentioned herein are the property of their
respective companies. Copyright ©2010 ViewSonic Corporation.All rights reserved.
8. Click Next to begin Setup Wizard installation.
Figure9
9. Select “Everyone” and click Next to continue.
Figure 10

WPG-350 Utility software installation – Windows 7®
- 5 -
Windows 7 is a registered trademark of Microsoft Corporation. All other corporate names and trademarks mentioned herein are the property of their
respective companies. Copyright ©2010 ViewSonic Corporation.All rights reserved.
10. Click Next to confirm Installation.
Figure 11
11. Click YES button if prompted by User Account Control to continue installation.
Figure12

WPG-350 Utility software installation – Windows 7®
- 6 -
Windows 7 is a registered trademark of Microsoft Corporation. All other corporate names and trademarks mentioned herein are the property of their
respective companies. Copyright ©2010 ViewSonic Corporation.All rights reserved.
12. Click Close to complete installation.
Figure13
13. Click the icon titled WPG-350 to run Utility program.
Figure 14