ViewSonic WPG-350 Firmware update

WPG-350 Utility software installation – Windows XP
1. Boot up the device and the instruction page (startup page) will display on the monitor.
Figure1
2. Hover mouse pointer over Wireless Connection icon located in the Tray area. Right click to
display the menu and left click View Available Wireless Networks.
Figure 2

3. Select WPG-350 Wireless Network Connection and click Connect button (see figure 3).
Connection will show an exclamation - this is ok.
Figure3
4. In the web browser address field enter “10.30.40.1” and press enter.
5. Click “For Windows” button to download utility program from WPG-350.
Figure 4

6. Click Run button to download and install utility.
Figure 5
7. Click Run button to confirm Security Warning.
Figure6
8. Click Next to begin Setup Wizard installation.
Figure7

9. Select “Everyone” and click Next to continue.
Figure 8
10. Click Next to confirm Installation.
Figure 9

11. Click Close to complete installation.
Figure10
12. Click the icon titled WPG-350 to run Utility program.
Figure 11