VIKING BAGS UNIVERSAL LARGE PLAIN SINGLE STRAP... User manual

www.vikingbags.com
888-208-1949 | [e-mail]
copyright © 2016 Vikingbags
VIKING UNIVERSAL LARGE PLAIN SINGLE STRAP SADDLEBAGS INSTRUCTION
Step 1
1. Assemble the saddlebags
support (See Figure C).
2. Make Sure it is securely mounted
on the bike (See Figure C).
Step 2
Lift the back seat and install the bags
on your bike. Your saddlebags must
be at least 1 inch clear of any
exhaust pipe, while stationary or
moving.
Step 3
For height adjustment of the bags,
separate the two yoke halves and
reposition them. Adjust the yoke
shorter for higher saddlebags, and
vice versa. (See Figure B).
Step 4
When you have the yoke in the
correct position, tighten the nylon
safety strap using the adjustable D-
rings (See Figure C) on the top of the
yoke.
Step 5
Saddlebags are adjustable towards
the front/rear of the bike for clearing
turn signals and shock absorbers
(See Figure D). Use appropriate pair
of holes to adjust the mounting
position of the saddlebags.
Step 6
Use the straps located at the bottom
of each bag (Fig E) to connect the
bag to the saddlebag support. Wrap
them around the support, buckle the
ends together, then adjust the length
so that the straps are tight and are
held securely in a fixed position.
Fig.C
Fig.A
Fig.B
Fig.C
Fig.D
Fig.E

www.vikingbags.com
888-208-1949 | [e-mail]
copyright © 2016 Vikingbags
Step 7
The throw over installation is now
complete.
Step 8
The bag can be easily removed from
the bike by tuning the quick release
knobs 360 degrees. These knobs
can be accessed from inside the
bags.
Warnings
Avoid usage of the any mounting part that is impaired or is not working properly. If you are not sure about the
installation process, please seek professional advice.
It is important to note that if you do not mount these saddlebags properly damage may be caused to the saddlebags
and/or motorcycle. If bag are securely installed, nopart of the mounting system or bags should touchthe motorcycle
while in operation.
Sporadically check for shifting of the bag and verify that no part of the mounting system is interfering with any part
of the motorcycle while riding. This includes the drive train, suspension, brakes or wheels.
Do not attempt to use these saddlebags if the mounting instructions are unclear. It is important that you seek
professional assistance from a qualified mechanic or dealer.
It is highly dangerous to operate a motorcycle if the saddlebags are not installed correctly. We suggest you find a
motorcycle mechanic for further assistance in the event you have doubts about your abilities to install the product
securely.
Make sure that mounting bolts do not hit the tire inside the fender. In case the bolts are too long, use the provided
spacers to adjust for the excessive length.
Fig.G
Fig.F