
OUTDOOR—COOKING
53”W. Ultra-Premium T-Series/E-Series Gas Grill
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
All mo els inclu e
• Brass Trim Option (BR)—nameplate
handle/brackets and knob bezels.
Brass components have a durable
protective coating for maintenance-
free normal use.
FINISH DETAILS FOR ALL MODELS
• Stainless Steel (SS)
o Porcelain-coated cooking grids (and
“V” grates on the 412 model’s side
burners) and black knobs.
Stan ar Features & Accessories
Mo el Options
*T-Series & E-Series models look the same, with the exception o the canopy light switch in the upper right corner o the E-Series control panel.
(See photo o 30”W. E-Series grill or example.)
ORDERING INSTRUCTIONS
You must specify fuel type (“N” or “L”) following model number (VGBQ5304RT1NSS). If ordering optional brass trim specify code at end
(VGBQ5304RT1NSSBR).
R E L E A S E D 8 / 5 / 0 8
© 2 0 0 8 V R C — INFORMATION SUBJECT TO CHANGE
VGBQ530-4RE1*
T-Series/E-Series
Four-Burner All-Grill
VGBQ532-3RE1*
T-Series/E-Series
Three-Burner Grill
w/Side Burners
VGIQ530-4RT/E1*
T-Series/E-Series
Four-Burner All-Grill
(inc. TruSear™ Burner)
VGIQ532-3RT/E1*
T-Series/E-Series
Three-Burner Grill
w/Side Burners
(inc. TruSear™ Burner)
• Commercial styling and construction
oBuilt from thick sheets of rugged
heavy-duty stainless steel
oDouble wall construction insulates
hood to help keep heat inside and
provides for a cooler sidewall
oHood is slightly slanted to prevent
water from accumulating on top of
grill and provides a sleek style that is
synonymous with the Viking name
oNo exposed rotisserie slot to take
away from strength of sidewall or
allow heat to escape
oAll models can be built into any type
of enclosure without the need of an
insulated jacket – a Viking exclusive
oStainless steel landing ledge with
solid welded seamless finish
oNo assembly required
• Canopy has been designed for seamless
fit and finish
• Knobs are cast metal for durability and
all bezels match indoor range line
• All outdoor control panel graphics are
permanently laser-etched at the factory
• Extra-deep sealed burner box keeps
heat contained in burner area allowing
easier temperature maintenance
• Stainless steel flavor-generator plates
catch drippings generate smoke
minimize flare-ups and allow for better
heat control
oPerforated design allows heat to
spread quickly and evenly across
entire surface
oBurner flames are visible through
perforations allowing user to visually
monitor heat output and adjust to
desired level
• Chrome-plated warming rack –
reinforced by heavy-duty rack supports –
can easily be adjusted to three different
positions allowing use of additional
accessory racks
• Rotisseries standard on all Ultra-
Premium models; rotisserie system
consists of a 15 000 BTU Gourmet-
Glo™ infrared rear burner heavy-duty
rotisserie motor stainless steel 1/2”
rotisserie rods and two rotisserie forks
o Infrared burner is a reliable
electronically ignited one-piece
design
o Rotisserie rod is mounted on a ball-
bearing rod support that provides
smooth rotating action; rod is fully
enclosed within grill a Viking
exclusive feature
o Rotisserie motor assembly is
supported by a rigid mount and is
easily attached and removed from
the grill for hassle-free cooking and
storage
o No counter balance required due to
heavy-duty rotisserie system
• Removable smoker box
accommodates wood chips or large
wood chunks
oHinged design allows easy operation
when adding smoker chips
o12 500 BTU burner underneath can
be adjusted for maximum smoking
performance
oSmoker box can be replaced with
grilling grate for use of entire grill
surface
• Numerical thermometer gives precise
temperatures for grilling smoking and
warming
• Easy maintenance and cleanup
oExtra heavy-duty cooking grids are
porcelain-coated to prevent food from
easily sticking; virtual non-stick surface
creates optimal cooking areas while
also creating an easy-to-clean surface
oBurners are equipped with stainless
steel drip guards to combat burner
clog and aid grease management by
channeling liquids to the drip tray
assisting in flare-up control
o Grease Control™ system consists of
full-width removable stainless steel
drip tray and individual removable
trays within main tray
•Exclusive “trays within a tray”
design channels liquids to the
precise drip tray location
providing easy cleanup because
liquids are contained
•Stainless steel ball-bearing rollers
provide smooth opening of drip
tray while roller stops prevent tray
from falling out