Vilano 100-ALYRLTR User manual

EMAIL:
[e-mail]
Thank you for your purchase of the Heavy Duty Alloy Rollator!
Safety Instructions:
Warning! Failur
e to follow safety instructions
• DO NOT use this product as a wheelchair.
• DO NOT ever
transport someone while sitting on this walker.
• DO NOT exceed maximum weight capacity.
• BRAKES MUST be in
locked position before sitting
• DO NOT self-propel the walke
r while
• DO NOT sit on the walker on an incline.
• INSPECT BRAKES before each use.
• ALL WHEELS MUST be in c
ontact with the floor or ground
• BACKREST IS NOT intend
ed to support your full weight.
while seated.
• DO NOT use o
n escalators, stairs, moving sidew
• BOTH FEET should rest flat on the ground when sitting.
• RECOMMENDED U
SER’S HEIGHT from 5’4” to 6’4”. Weight Capacity is
Product name
SKU: 100-
ALYRLTR
EMAIL:
[e-mail]
TEL: 855-
438
help.vilanobikes
[e-mail]
WEB: help.vilanobikes.com TEL: 855-
438
Thank you for your purchase of the Heavy Duty Alloy Rollator!
e to follow safety instructions
may result in serious injury.
• DO NOT use this product as a wheelchair.
transport someone while sitting on this walker.
• DO NOT exceed maximum weight capacity.
locked position before sitting
on the seat.
r while
in seated position.
• DO NOT sit on the walker on an incline.
• INSPECT BRAKES before each use.
ontact with the floor or ground
at all times.
ed to support your full weight.
It is intended to provide
n escalators, stairs, moving sidew
alks, or uneven surfaces.
• BOTH FEET should rest flat on the ground when sitting.
SER’S HEIGHT from 5’4” to 6’4”. Weight Capacity is
3
Product name
: Heavy Duty Alloy Rollator
ALYRLTR
[e-mail]
438
-2453
help.vilanobikes
.com
438
-2453
Thank you for your purchase of the Heavy Duty Alloy Rollator!
It is intended to provide
back support
3
00 lb/182 kg.

EMAIL:
[e-mail]
Assembly Instructions:
Assembling your
Heavy Duty Alloy Rollator walker
1. Carefully remove the walker from the shipping carton.
2. Unfold the walker by pu
shing down the folding brackets
walker until they are fully
extended
3. Insert handle bars into t
he frame of the walker, keeping
the frame (photo on right).
4. Lower the backrest.
5. Adjust the height of
the handles by standing upright
shoulders relaxed and arms
hanging at your sid
height even with your wrists.
Operating Instructions:
To Walk
• Position yourself
behind the walke
• Roll walker slowly
forward so that the rear wheels
body.
• While maintaining a stea
dy and safe roll forward, place
wheels.
• Repeat the movement with your othe
• To slow down, pull the brake handles up.
Product name
SKU: 100-
ALYRLTR
EMAIL:
[e-mail]
TEL: 855-
438
help.vilanobikes
[e-mail]
WEB: help.vilanobikes.com TEL: 855-
438
Heavy Duty Alloy Rollator walker
is simple. N
o tools are necessary!
1. Carefully remove the walker from the shipping carton.
shing down the folding brackets
on both sides of the roll
extended
(photo on left).
he frame of the walker, keeping
the brake cables outside
the handles by standing upright
behind the walker with
hanging at your sid
e. The handgrips should be at a
behind the walke
r and hold both handles firmly.
forward so that the rear wheels
are a few inches ahead of your
dy and safe roll forward, place
your foot in line with the rear
• Repeat the movement with your othe
r foot.
• To slow down, pull the brake handles up.
Product name
: Heavy Duty Alloy Rollator
ALYRLTR
[e-mail]
438
-2453
help.vilanobikes
.com
438
-2453
o tools are necessary!
on both sides of the roll
ing
the brake cables outside
behind the walker with
your
e. The handgrips should be at a
are a few inches ahead of your
your foot in line with the rear

EMAIL:
[e-mail]
We appreciate your feedback! We hope this exceeded your expectations. If you enjoyed our
product, feel free to leave us a positive product review. If you need help or have
please email us at customercare@
be sure you are happy!
Operating Instructions, Cont.:
To Lock and Unlock Brakes
•
Fig. 1 shows brakes in “unlock” position.
handles until the brakes
click into l
it any further than this point.
• To unlock the brakes
and resume walking, pull up the
click.
Fig.1
To Use as a Seat
• Make sure walker is on a flat
• Lock the brakes before sitting.
• Make sure your feet rest flat on the ground.
Care & Maintenance:
Periodic Brake Adjustment
To adjust the sensitivity of the brake:
• Turn locking nut clockwise to
• Turn locking nut counter-
clockwise to increase sensitivity.
Warning!
• Over adjustment of the brake might prevent the wheels
from moving freely.
• Under adjustment of the brake may cause the brake pad
not to engage at all.
•
Do not use walker if brakes are not working properly.
Product name
SKU: 100-
ALYRLTR
EMAIL:
[e-mail]
TEL: 855-
438
help.vilanobikes
[e-mail]
WEB: help.vilanobikes.com TEL: 855-
438
We appreciate your feedback! We hope this exceeded your expectations. If you enjoyed our
product, feel free to leave us a positive product review. If you need help or have
please email us at customercare@
vilanobikes
.com and we will do everything in our power to
Operating Instructions, Cont.:
Fig. 1 shows brakes in “unlock” position.
To lock the brakes, push
down on the brake
click into l
ocked position, as shown below in Fig. 2.
and resume walking, pull up the
brake h
andles until you hear a
Fig.2
surface, not on an incline.
• Lock the brakes before sitting.
• Make sure your feet rest flat on the ground.
To adjust the sensitivity of the brake:
• Turn locking nut clockwise to
reduce brake sensitivity.
clockwise to increase sensitivity.
• Over adjustment of the brake might prevent the wheels
• Under adjustment of the brake may cause the brake pad
Do not use walker if brakes are not working properly.
Product name
: Heavy Duty Alloy Rollator
ALYRLTR
[e-mail]
438
-2453
help.vilanobikes
.com
438
-2453
We appreciate your feedback! We hope this exceeded your expectations. If you enjoyed our
product, feel free to leave us a positive product review. If you need help or have
questions,
.com and we will do everything in our power to
down on the brake
ocked position, as shown below in Fig. 2.
Do not push
andles until you hear a