ViM BATE-R User manual

NT00000591-BATE-R-AN-231018
INSTRUCTION MANUAL
INSTALLATION | WIRING | COMMISSIONING | MAINTENANCE |
AFNOR CERTIFICATION
ISO 14001
Environnement
AFNOR CERTIFICATION
ISO 9001
Qualité
BATE-R
Circular electrical heater
Power control tted

2/16 NT00000591-BATE-R-AN-231018
CONTENTS
1. GENERAL........................................................................................................................................... 3
1.1 Warnings .................................................................................................................................. 3
1.2 Assembly and safety instructions ............................................................................................. 3
1.3 Reception – Storage................................................................................................................. 4
1.4 Warranty................................................................................................................................... 4
2. RANGE / PRODUCT PRESENTATION.............................................................................................. 4
3. INSTALLATION .................................................................................................................................. 5
3.1 Features ................................................................................................................................... 5
4. ELECTRICAL CONNECTION............................................................................................................ 6
4.1 BATE-R Single phase + TJ-K10K duct probe + TR5K potentiometer ...................................... 7
4.2 BATE-R Single-phase + NTC10 room probe and TJ-K10K supply limitation probe................. 8
4.3 BATE-R Three-phase + TJ-K10K duct probe + TR5K box ....................................................... 9
4.4 BATE-R Three-phase + NTC10 room probe and supply limitation probe TJ-K10K.................11
5. COMMISSIONING - MAINTENANCE - ALARMS............................................................................ 13
5.1 Safety instructions .................................................................................................................. 13
5.2 Commissioning....................................................................................................................... 13
5.3 Maintenance and alarm.......................................................................................................... 14
6. WASTE MANAGEMENT.................................................................................................................. 14
6.1 Treatment of packaging and non-hazardous waste ............................................................... 14
6.2 Treatment of Professional WEEE........................................................................................... 14

3/16 NT00000591-BATE-R-AN-231018
1. GENERAL
1.1 Warnings
This product has been manufactured in compliance with rigorous technical safety regulations, in accordance
with CE standards. The CE declaration can be downloaded from the website (contact details on last page).
Before installing and using this product, carefully read these instructions which contain important information
for your safety and that of users during the installation, commissioning and maintenance of this product.
Once installation is complete, leave this notice available for future reference.
The installation of this product and all other interventions (use, connections, commissioning, maintenance)
must be carried out by a professional applying state of the art, standards and safety regulations in force. It
must comply with the requirements relating to EMC and LVD.
The manufacturer cannot be held liable for any possible bodily injury and/or material damage caused when
the safety instructions have not been respected or following a modication of the product.
BATE R coils are intended to be inserted into rigid circular ducts in galvanized steel or aluminum for hea-
ting applications in tertiary buildings.
• Installation inside the premises
• Speed in the heater between 1.5 m/s and 10 m/s
• Environmental temperature between -20°C / +50°C
• Maximum relative humidity 95% without condensation
• Non-potentially explosive atmosphere
• Low salinity atmosphere, without corrosive chemicals
1.2 Assembly and safety instructions
Equip yourself with appropriate PPE (Personal Protective Equipment) before any intervention.
If work needs to be carried out on the appliance, turn o󰀨 the power supply at the main circuit breaker and
ensure that no one can accidentally turn it back on.
Check the earth connection.
Do not touch the electronic card when the device is powered on. The control circuit is not isolated from the
power supply circuit of the device.
• For rigid circular networks in galvanized steel or A1 (M0) aluminum.
• Vertical installation: the ow must be upward.
• Horizontal installation: position the heater so that the connection box is not underneath.
• Fixing the cover with screws.
• Access to the cover necessary for the manual reset. The heater must be capable of being disassem-
bled for replacement and maintenance.
• Possibility of externally insulating the heater with A1 (M0) insulation. Do not insulate the cover.
• Respect the direction of the air indicated by the arrow.
• Respect a distance of twice the diameter between the heater and the other components of the
network, in particular the lters.
• Maintain a distance of 100 mm between the heater and surrounding materials.
• The network must not be completely blocked.
TJ-K10K
Filtre
D
2xD
TR5K
Bouton de réarmement
manuel
BATTERIE
Boîtier de régulation
2xD
Pièce
chauée
Heated
room
Regulation box Manual reset button
Filter
HEATER

4/16 NT00000591-BATE-R-AN-231018
1.3 Reception – Storage
In the event of lack, non-compliance, total or partial damage of the products delivered, the Buyer must, in
accordance with article 133-3 of the Commercial Code, issue written reservations on the carrier's receipt
and conrm them within the 72 hours by registered letter with a duplicate addressed to the seller. Unreser-
ved receipt of the material deprives the Buyer of any further recourse against us.
The product must be stored protected from bad weather, shocks and dirt due to projections of any kind
during its transport from the supplier to the nal customer, and on the site before installation.
1.4 Warranty
The equipment is guaranteed for 24 months from the invoice date. The warranty is limited to the replace-
ment of parts or equipment whose operation is recognized as defective by the manufacturer, excluding
any compensation or penalties. The costs of labor, removal and rest, travel related to the replacement are
the responsibility of the Customer. Excluded from our warranty are defects linked to abnormal use or not
in accordance with the recommendations in our instructions, defects observed as a result of normal wear
and tear, incidents caused by negligence, lack of monitoring or maintenance, defects due to incorrect ins-
tallation of devices or poor storage conditions prior to assembly.
Under no circumstances is the manufacturer responsible for transformed or repaired equipment, even
partially.
2. RANGE / PRODUCT PRESENTATION
• Diameters from 125 to 500 mm.
• Power from 300 to 18,000 W
• Mono 230V 50Hz or tri 400V 50Hz power supply.
Standard construction
• Circular ange and IP44 connection box in Aluzinc treated steel.
• Connection by waterproof class C seals.
• IP44 cable grommets to cut.
• Heating elements shielded in 304 stainless steel.
• 1 TJ-K10K duct probe to connect for measuring the supply temperature (+0 to +30°C) or high and
low limitation (+15°C/+40°C), delivered in the box or heater.
• 1 TR5K connection box with +0 to +30°C adjustment potentiometer and integrated NTC10 room
sensor, delivered in the box or in the heater.
Regulation box integrating:
• 1 Triac type electronic power PID regulator.
• 1 safety air ow sensor (1.5 m/s).
• 1 safety thermostat with automatic reset 50°.
• 1 safety thermostat with manual reset, setpoint 100°C.
• 3 LED indicating heating (red) / operating mode-fault (green) / voltage presence (yellow).
• Connection terminal block.
Functioning :
Duct temperature regulation
• Micro-switch 1 in position 1 delivered from the factory.
• Adjustment of the temperature set point +0°C to +30°C on the TR5K box.
• Temperature measured by the TJ-K10K probe.
Room temperature regulation
• Micro-switch 1 to be placed in the ON position.
• Adjustment of the temperature set point +0°C to +30°C on the TR5K box.
• Temperature measured by the NTC10 probe in the TR5K box.
• Low +15°C and high +40°C limitation on supply, measured by the TJ-K10K probe. If the temperature
measured by the probe is:
- below 15°C. The heater will heat up to try to reach 15°C (low limit).
- above 40°C. The heater stops heating (high limit).

5/16 NT00000591-BATE-R-AN-231018
3. INSTALLATION
3.1 Features
BATE R
A
B
C
DD
70Ø
Designation Power
(W) Intensity (A) Weight (Kg) Dimensions (mm) Minimum ow (m
3
/h) Maximum ow (m
3
/h)
A B C D
230V single-phase power supply
BATE R 125-300W Mono
300 1,4 2,2 276 373 195 48,5 70 450
BATE R 125 600W Mono
600 2,8 2,3 276 373 195 48,5 70 450
BATE R 125 900W Mono
900 4,1 2,4 276 373 195 48,5 70 450
BATE R 125 1200W Mono
1 200 5,5 2,7 276 373 195 48,5 70 450
BATE R 125-1800W Mono
1800 8,2 2,9 276 373 195 48,5 70 450
BATE R 160 300W Mono
300 1,4 2,9 276 373 230 48,5 110 740
BATE R 160 900W Mono
900 4,1 3,1 276 373 230 48,5 110 740
BATE R 160 1800W Mono
1800 8,2 3,3 276 373 230 48,5 110 740
BATE R 160 2100W Mono
2 100 9,6 3,4 276 373 230 48,5 110 740
BATE R 160 2700W Mono
2700 12,3 3,6 276 373 230 48,5 110 740
BATE R 200 600W Mono
600 2,8 3,7 276 373 270 48,5 170 1 150
BATE R 200-900W Mono
900 4,1 3,7 276 373 270 48,5 170 1 150
BATE R 200 1200W Mono
1 200 5,5 3,8 276 373 270 48,5 170 1 150
BATE R 200-2100W Mono
2 100 9,6 3,9 276 373 270 48,5 170 1 150
BATE R 200 3000W Mono
3 000 13,7 4,0 276 373 270 48,5 170 1 150
BATE R 250 600W Mono
600 2,8 6,6 276 373 320 48,5 270 1 800
BATE R 250 1200W Mono
1 200 5,5 6,8 276 373 320 48,5 270 1 800
BATE R 250-2100W Mono
2 100 9,6 6,9 276 373 320 48,5 270 1 800
BATE R 250 3000W Mono
3 000 13,7 7,0 276 373 320 48,5 270 1 800
BATE R 315 900W Mono
900 4,1 8,7 276 376 385 50,0 420 2 850
BATE R 315 1200W Mono
1 200 5,5 8,8 276 376 385 50,0 420 2 850
BATE R 315 1500W Mono
1 500 6,9 8,8 276 376 385 50,0 420 2 850
BATE R 315-2100W Mono
2 100 9,6 10,0 276 376 385 50,0 420 2 850
BATE R 315 3000W Mono
3 000 13,7 10,5 276 376 385 50,0 420 2 850
BATE R 315-4000W Mono
4 000 18,3 11,0 276 376 385 50,0 420 2 850
BATE R 400 3000W Mono
3 000 13,7 9,1 276 376 470 50,0 680 4 600
BATE R 400 5000W Mono
5 000 22,8 10,2 276 376 470 50,0 680 4 600
400V three-phase power supply
BATE R 160 5,400W Tri
5 400 7,8 3,5 276 373 230 48,5 110 740
BATE R 200 6,000W Tri
6 000 8,7 4,4 276 373 270 48,5 170 1 150
BATE R 250 6,000W Tri
6 000 8,7 7,3 276 373 320 48,5 270 1 800
BATE R 250 9,000W Tri
9 000 13,0 8,9 276 373 320 48,5 270 1 800
BATE R 250 12,000W Tri
12 000 17,3 10,5 402 500 320 48,5 270 1 800
BATE R 315 6,000W Tri
6 000 8,7 9,2 276 376 385 50,0 420 2 850
BATE R 315 9,000W Tri
9 000 13,0 10,8 276 376 385 50,0 420 2 850
BATE R 315 12,000W Tri
12 000 17,3 11,4 400 500 385 50,0 420 2 850
BATE R 400 3,000W Tri
3 000 4,3 12,0 276 376 470 50,0 680 4 600
BATE R 400 9,000W Tri
9 000 13,0 13,1 276 376 470 50,0 680 4 600
BATE R 400 12,000W Tri
12 000 17,3 14,0 400 500 470 50,0 680 4 600
BATE R 500 18,000W Tri +N
18 000 26,0 17,8 530 630 570 50,0 1 060 7 070
These datas are visible on the identication label present on each product.

6/16 NT00000591-BATE-R-AN-231018
Housing with TR5K potentiometer and integrated NTC10 probe
• Length: 71mm
• Width: 71mm
• Thickness: 25 mm
26,8
25,5
25,0
Vis de xation du couvercle sous le bouton
71,0
71,0
35,5
18,0 4,0
28,0
59,8
Cover xing screw under the button
4. ELECTRICAL CONNECTION
The device is originally equipped with two safety thermostats to prevent overheating: a thermostat with au-
tomatic reset (50°C) and a thermostat with manual reset (100°C) placed on the cover. They must control
a contactor (not supplied) which cuts o󰀨 the general power supply to the heater in the event of a
trip.
The coil is delivered with a shunt onto the M/A terminal block which allows the heater to operate.
The shunt can be replaced by an external contact which will allow remote operation authorization by clo-
sing the circuit.
To ensure the operation of the electric coil is controlled by the fan and manage the safety chain with the
thermostats, provide:
• A general on/o󰀨 control: fan + heater.
• A timer to manage post-ventilation when the system is stopped.
• A power contactor to manage the power supply to the electric heater.
• A power contactor to manage the fan power supply if the latter is a three-phase AC model.
• A protection circuit breaker for each power supply.
Electrical cable sections:
• Control terminal block: provide cables with a section ≤ 4 mm².
• Power terminal block: the terminal block capacities are indicated in the table below:
10 mm² 16 mm²
Single phase 230V ≤ 4,5kW ˃ 4,5kW
Three-phase 400V ≤ 15kW ˃ 15kW

7/16 NT00000591-BATE-R-AN-231018
4.1 BATE-R Single phase + TJ-K10K duct probe + TR5K potentiometer
Blowing temperature control.
Setting the setpoint temperature on the TR5K box.
Micro switch 1 held in position “1”. Micro switch 2: indi󰀨erent position
BATE-R single phase - Duct temperature control
t°t°
PE
ON
12
LED1 LED2
t°
t°
SOUS TENSION
CHAUFFAGE
MODE
BLEU
MARRON
JAUNE/VERT
230V
Voir détails
asservissement
ventilateur
Shunt pour
autorisation
de marche
X18 X15 X5 X6 F3.2 F3.1
C
RG1 MICRO SWITCH
TJ-K10K TR5K
PTC
B
KM1
S
A
V1
LED3
PE
A1 A2
G
COM OUT VCC
L N PE PE
N
L
RANG 1
LN
X7 X12 X9 X26 X8 X16 X4 X3 X20
GND
OUT
IN
GND1
OUT1
7 8 9
10 11
MA
12
MA
5 6
See fan control
details
POWER ON
HEATING
RANK 1
BLUE
BROWN
YELLOW/GREEN
Shunt for
running au-
thorization
Fan control
EC fan
Single phase EC fan Three-phase AC fan Single phase - In < 8A AC fan Three-phase
15
18
T1
A1
A2
Y1
Ventilateur
Mar
che/Arrêt
ve
ntilateur +
batterie
M
0
S
10 V
5 6
N
L
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
N
L
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
N
L
N
L
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
N
L
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/stop
fan + heater
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
N
L
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ve
ntilateur +
batterie
M
0
S
10 V
5 6
N
L
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
N
L
N
L
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
N
L
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Start/stop
fan + heater
Fan
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
N
L
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
N
L
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Mar
che/Arrêt
ve
ntilateur +
batterie
M
5 6
N
L
N
L
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
N
L
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Start/stop
fan + heater
Fan
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
N
L
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
N
L
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
N
L
N
L
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Mar
che/Arrêt
ve
ntilateur +
batterie
Ventilateur
M
5 6
N
L
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Start/
stop fan +
heater
Fan
Included in the heater Accessories
RG1 EKR-K KN1 NI PTC 2NTC controller DBCCA 1V - M/A switch (VIM accessory)
Micro Switch Micro switch EMCR1 - Post-ventilation (VIM Accessory)
AHeating resistors KM1 Electric heater supply contactor
BAutomatic reset thermostat KM2 Fan power contactor
CManual reset thermostat SElectric heater protection circuit breaker
V1 Solid State Drive S1 Control circuit protection circuit breaker
PTC Air ow sensor S2 Fan protection circuit breaker
TR5K Ambient adjustment potentiometer
TJ-K10K Duct probe

8/16 NT00000591-BATE-R-AN-231018
4.2 BATE-R Single-phase + NTC10 room probe and TJ-K10K supply limitation
probe
Room temperature control and supply temperature limitation with micro switch 1 in "On" position. Micro
switch 2: indi󰀨erent position.
Setting the setpoint temperature on the TR5K box.
BATE-R Single-phase - Room temperature control, supply temperature limitation
t°t°
PE
ON
12
LED1 LED2
t°
t°
SOUS TENSION
CHAUFFAGE
MODE
BLEU
MARRON
JAUNE/VERT
230V
Shunt pour
autorisation
de marche
X18 X15 X5 X6 F3.2 F3.1
C
RG1 MICRO SWITCH
TJ-K10K
PTC
B
KM1
S
A
V1
LED3
PE
A1 A2
G
COM OUT VCC
L N PE PE
N
L
RANG 1
LN
X7 X12 X9 X26 X8 X16 X4 X3 X20
GND
OUT
IN
GND1
OUT1
7 8 9
10 11
MA
12
MA
5 6
TR5K + NTC10
Voir détails
asservissement
ventilateur
See fan control
details
POWER ON
HEATING
RANK 1
BLUE
BROWN
YELLOW/GREEN
Shunt for
running au-
thorization
Fan control
EC fan
Single phase EC fan Three-phase AC fan Single phase - In < 8A AC fan Three-phase
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
N
L
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
N
L
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
N
L
N
L
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
N
L
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/stop
fan + heater
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
N
L
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Mar
che/Arrêt
ve
ntilateur +
batterie
M
0
S
10 V
5 6
N
L
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
N
L
N
L
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
N
L
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Start/stop
fan + heater
Fan
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
N
L
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
N
L
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
N
L
N
L
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
N
L
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Start/stop
fan + heater
Fan
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
N
L
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
N
L
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
N
L
N
L
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
N
L
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Start/
stop fan +
heater
Fan
Included in the heater Accessories
RG1 EKR-K KN1 NI PTC 2NTC controller DBCCA 1V - M/A switch (VIM accessory)
Micro Switch Micro switch EMCR1 - Post-ventilation (VIM Accessory)
AHeating resistors KM1 Electric heater supply contactor
BAutomatic reset thermostat KM2 Fan power contactor
CManual reset thermostat SElectric heater protection circuit breaker
V1 Solid State Drive S1 Control circuit protection circuit breaker
PTC Air ow sensor S2 Fan protection circuit breaker
TR5K + NTC10 Adjustment potentiometer + NTC10 room probe
TJ-K10K Duct probe

9/16 NT00000591-BATE-R-AN-231018
4.3 BATE-R Three-phase + TJ-K10K duct probe + TR5K box
Blowing temperature control with micro switch 1 in position “1”. Micro switch 2: indi󰀨erent position.
Setting the setpoint temperature on the TR5K box.
BATE-R Three-phase < 18kW - Duct temperature control
t°t°
PE
LED1 LED2
t°
t°
3x400V
SOUS TENSION
CHAUFFAGEMODE
X4 X3 X20
Shunt pour
autorisation
de marche
F3.1 F3.2
L1 L2 L3
LED3
PE
X7 X12 X9 X26 X17 X14 X8 X16 X6 X5 X15 X18
A1 A2
GG
A1 A2
PE
L1 L2 L3
RANG 1
L1 L2 L3
COM OUT VCC
MA MA
GND
OUT
IN
GND1
OUT1
7 8 9
10 11 12
NN
5 6
ON
12
BLEU
MARRON
JAUNE/VERT
Voir détails
asservissement
ventilateur
C
RG1 MICRO SWITCH
TJ-K10K TR5K
PTC
B
KM1
S
A
V1 V2
See fan control
details
POWER ON
HEATING
RANK 1
BLUE
BROWN
YELLOW/GREEN
Shunt for
running au-
thorization
Fan control
EC fan
Single phase EC fan Three-phase AC fan Single phase - In < 8A AC fan Three-phase
15
18
T1
A1
A2
Y1
Ventilateur
Mar
che/Arrêt
ve
ntilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/stop
fan + heater
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ve
ntilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/stop
fan + heater
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Mar
che/Arrêt
ve
ntilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/stop
fan + heater
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Mar
che/Arrêt
ve
ntilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/
stop fan +
heater
Included in the heater Accessories
RG1 EKR-K KN3 NI PTC 2NTC controller DBCCA 1V - M/A switch (VIM accessory)
Micro Switch Micro switch EMCR1 - Post-ventilation (VIM Accessory)
AHeating resistors KM1 Electric heater supply contactor
BAutomatic reset thermostat KM2 Fan power contactor
CManual reset thermostat SElectric heater protection circuit breaker
V1 - V2 Solid State Drive S1 Control circuit protection circuit breaker
PTC Air ow sensor S2 Fan protection circuit breaker
TR5K Ambient adjustment potentiometer
TJ-K10K Duct probe

10/16 NT00000591-BATE-R-AN-231018
BATE-R Three-phase ≥ 18kW - Duct temperature control
Voir détails
asservissement
ventilateur
t°t°
PE
LED1 LED2
t°
t°
3x400V
SOUS TENSION
CHAUFFAGEMODE
Shunt pour
autorisation
de marche
X4 X3 X20
N
X25 X24 F3.2 F3.1
L1 L2 L3
LED3
PE
PE
X7 X12 X9 X26 X17 X14 X8 X16 X6 X5 X15 X18
GND
OUT
IN
GND1
OUT1
A1 A2
G
G
A1 A2
PE
L1 L2 L3
7 8 9
10 11 12
RANG 1
L1 L2 L3
MA MA
COM OUT VCC
RANG 2
L1 L2 L3
K1
N
5 6
ON
12
BLEU
MARRON
JAUNE/VERT
C
RG1 MICRO SWITCH
TJ-K10K TR5K
PTC
B
KM1
K1
S
A
A
V1
V2
See fan control
details
POWER ON
HEATING
RANK 1
RANK 2
BLUE
BROWN
YELLOW/GREEN
Shunt for
running au-
thorization
Fan control
EC fan
Single phase EC fan Three-phase AC fan Single phase - In < 8A AC fan Three-phase
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/stop
fan + heater
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Mar
che/Arrêt
ve
ntilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/stop
fan + heater
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/stop
fan + heater
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/
stop fan +
heater
Included in the heater Accessories
RG1 EKR-K KN3 NI PTC 2NTC controller DBCCA 1V - M/A switch (VIM accessory)
Micro Switch Micro switch EMCR1 - Post-ventilation (VIM Accessory)
AHeating resistors KM1 Electric heater supply contactor
BAutomatic reset thermostat KM2 Fan power contactor
CManual reset thermostat SElectric heater protection circuit breaker
V1 - V2 Solid State Drive S1 Control circuit protection circuit breaker
PTC Air ow sensor S2 Fan protection circuit breaker
TR5K Ambient adjustment potentiometer
TJ-K10K Duct probe
K1 Internal contactor

11/16 NT00000591-BATE-R-AN-231018
4.4 BATE-R Three-phase + NTC10 room probe and supply limitation probe TJ-K10K
Room temperature control and supply temperature limitation with micro switch 1 in "On" position. Micro
switch 2: indi󰀨erent position.
Setting the setpoint temperature on the TR5K box.
BATE-R Three-phase < 18kW - Room temperature control, supply temperature limitation.
t°t°
PE
LED1 LED2
t°
t°
3x400V
SOUS TENSION
CHAUFFAGEMODE
X4 X3 X20 F3.1 F3.2
L1 L2 L3
LED3
PE
X7 X12 X9 X26 X17 X14 X8 X16 X6 X5 X15 X18
A1 A2
GG
A1 A2
PE
L1 L2 L3
RANG 1
L1 L2 L3
COM OUT VCC
MA MA
GND
OUT
IN
GND1
OUT1
7 8 9
10 11 12
NN
5 6
ON
12
BLEU
MARRON
JAUNE/VERT
Shunt pour
autorisation
de marche
Voir détails
asservissement
ventilateur
C
RG1 MICRO SWITCH
TJ-K10K TR5K + NTC10
PTC
B
KM1
S
A
V1 V2
See fan control
details
POWER ON
HEATING
RANK 1
BLUE
BROWN
YELLOW/GREEN
Shunt for
running au-
thorization
Fan control
EC fan
Single phase EC fan Three-phase AC fan Single phase - In < 8A AC fan Three-phase
15
18
T1
A1
A2
Y1
Ventilateur
Mar
che/Arrêt
ve
ntilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/stop
fan + heater
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ve
ntilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/stop
fan + heater
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Mar
che/Arrêt
ve
ntilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/stop
fan + heater
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Mar
che/Arrêt
ve
ntilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/
stop fan +
heater
Included in the heater Accessories
RG1 EKR-K KN3 NI PTC 2NTC control DBCCA 1V - M/A switch (VIM accessory)
Micro Switch Micro switch EMCR1 - Post-ventilation (VIM Accessory)
AHeating resistors KM1 Electric heater supply contactor
BAutomatic reset thermostat KM2 Fan power contactor
CManual reset thermostat SElectric heater protection circuit breaker
V1 - V2 Solid State Drive S1 Control circuit protection circuit breaker
PTC Air ow sensor S2 Fan protection circuit breaker
TR5K + NTC10 Adjustment potentiometer + NTC10 room probe
TJ-K10K Duct probe

12/16 NT00000591-BATE-R-AN-231018
BATE-R Three-phase ≥ 18kW - Room temperature control, supply temperature limitation.
t°t°
PE
LED1 LED2
t°
t°
3x400V
SOUS TENSION
CHAUFFAGEMODE
Shunt pour
autorisation
de marche
X4 X3 X20
N
X25 X24 F3.2 F3.1
L1 L2 L3
LED3
PE
PE
X7 X12 X9 X26 X17 X14 X8 X16 X6 X5 X15 X18
GND
OUT
IN
GND1
OUT1
A1 A2
G
G
A1 A2
PE
L1 L2 L3
7 8 9
10 11 12
RANG 1
L1 L2 L3
MA MA
COM OUT
VCC
RANG 2
L1 L2 L3
K1
N
5 6
ON
12
BLEU
MARRON
JAUNE/VERT
C
RG1 MICRO SWITCH
TJ-K10K TR5K + NTC10
PTC
B
KM1
K1
S
A
A
V1
V2
Voir détails
asservissement
ventilateur
See fan control
details
POWER ON
HEATING
RANK 1
RANK 2
BLUE
BROWN
YELLOW/GREEN
Shunt for
runnning
authorization
Fan control
EC fan
Single phase EC fan Three-phase AC fan Single phase - In < 8A AC fan Three-phase
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/stop
fan + heater
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Mar
che/Arrêt
ve
ntilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/stop
fan + heater
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/stop
fan + heater
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
0
S
10 V
5 6
L
N
L1
L2 L3
S2S1
DE
KM1
230V 400V
15
18
T1
A1
A2
Y1
Ventilateur
Marche/Arrêt
ventilateur +
batterie
M
5 6
L
N
L
N
S2S1
DE
KM1
230V230V
15
18
T1
A1
A2
Y1
Marche/Arrêt
ventilateur +
batterie
Ventilateur
M
5 6
L
N
L1
L2 L3
230V 400V
DE
KM1
KM2
KM2
S2
S1
Fan
Start/
stop fan +
heater
Included in the heater Accessories
RG1 EKR-K KN3 NI PTC 2NTC controller DBCCA 1V - M/A switch (VIM accessory)
Micro Switch Micro switch EMCR1 - Post-ventilation (VIM Accessory)
AHeating resistors KM1 Electric heater supply contactor
BAutomatic reset thermostat KM2 Fan power contactor
CManual reset thermostat SElectric heater protection circuit breaker
V1 - V2 Solid State Drive S1 Control circuit protection circuit breaker
PTC Air ow sensor S2 Fan protection circuit breaker
TR5K + NTC10 Adjustment potentiometer + NTC10 room probe
TJ-K10K Duct probe
K1 Internal contactor

13/16 NT00000591-BATE-R-AN-231018
5. COMMISSIONING - MAINTENANCE - ALARMS
5.1 Safety instructions
Before starting up, the heater must be connected to the air ducts and the cover must be closed.
The fan must be operational.
Turn o󰀨 the power before opening the case.
See § "1.2 Assembly and safety instructions", page 3.
5.2 Commissioning
The ambient or duct temperature control choice is done with micro-switch no. 1 present on the electronic
mother board. Micro-switch no. 2 is not functional, its position is irrelevant.
TR5K Micro switch
Duct temperature control
Check the position of micro switch 1: in position 1
Set the temperature setpoint on the TR5K dial: +0°C to +30°C.
Room temperature control
Move the position of micro switch 1 to the ON position
Set the temperature setpoint on the TR5K dial: +0°C to +30°C.
Interpretation of diode colors:
Blowing temperature
control Room temperature control Default
LED 1 green Startup :
ashes 1 time every 5
seconds for 30 seconds.
Normal operation:
ashing 1 time per
second.
Startup :
ashes 1 time every 5
seconds for 30 seconds.
Normal operation:
ashing 2 times per
second.
No air ow:
ashes once every 5 seconds.
Fault in duct probe TJ-K10K, room
probe NTC10 (TR5K), safety air ow
sensor: permanent ignition.
LED 2 red On if heating
O󰀨 if heater not heating
LED 3 yellow On if heater is under voltage
O󰀨 if heater is o󰀨

14/16 NT00000591-BATE-R-AN-231018
5.3 Maintenance and alarm
Check the electrical connections every year, dirt absence and the good condition of the heater.
Operation of the safety thermostat with manual reset:
If the thermostat trips, take the following measures:
- Cut o󰀨 the power supply.
- Carefully look for the reason why the thermostat has
tripped.
- Once the error has been corrected, press the “reset”
button on the manual thermostat located on the heater
cover
6. WASTE MANAGEMENT
6.1 Treatment of packaging and non-hazardous waste
Packaging (non-returnable pallets, cardboard boxes, lms, wooden packaging) and other non-hazardous
waste must be recycled by an approved service provider.
It is strictly forbidden to burn them, bury them or dump them illegally.
6.2 Treatment of Professional WEEE
This product should not be landlled or treated with household waste but should be taken to an appropriate
collection point for waste electrical and electronic equipment (WEEE).

15/16 NT00000591-BATE-R-AN-231018

16/16 NT00000591-BATE-R-AN-231018
Non-contractual document. In the constant desire to improve the equipment, the manufacturer reserves
the right to make any technical modication without notice.
VIM
Les prés de Mégy Sud – SOUDAN
CS 60120 - 79401 ST MAIXENT L’ECOLE CEDEX
Tél. : [phone] or [phone]
[email protected] - www.vim.fr