Vimo CTC1501 User manual

CTC1501
High security magnetic contact for surface indoor-outdoor mounting (triple biased contact)
CTC1503
High security magnetic contact for surface indoor-outdoor mounting (double biased contact)
CTC1502
High security magnetic contact for surface indoor-outdoor mounting (high double biased contact)
CTC1505
Large gap magnetic contact for indoor-outdoor installation
Grid 1
Optimal gap A
min/max gap A
Item
Non-ferromagnetic
ferromagnetic
Non-ferromagnetic
Ferromagnetic
CTC1501
Da 8 a 12 mm
Da 4 a 8 mm
Da 3 a 17 mm
Da 1 a 11 mm
CTC1503
Da 15 a 18 mm
Da 5 a 10 mm
Da 5 a 25 mm
Da 2 a 15 mm
CTC1502
Da 2 a 20 mm
Da 1 a 12 mm
Da 1 a 30 mm
Da 1 a 20 mm
CTC1505
Up to 50 - 60 mm
Up to 20 - 30 mm
Up to 50 - 70 mm
Up to 20-40 mm
Measures B and C cannot exceed 6 mm.
The grid above indicate optimal distances between magnet and contact. Wider or narrower installation
distances can result in false alarms.
INSTALLATION
Fix the housings facing the two long sides face to face keeping the distance between the parts according to
grid 1. Insert the contact part pcb and connect to control panel. Align magnet and contact arrow for correct
installation. Pay attention to the tamper microswitch, remove all screw before opening the cover.
EN50131-2-6 grade 3 class IV
EN50131-2-6 grade 3 class IV
EN50131-2-6 grade 2 class IV
EN50131-2-6 grade 3 class IV
120 mm
37 mm
A
26 mm
B
C
24 h
NC
Tamper loop
Contact loop (closed when magneti s next)

MAINS AXIS OPERATING GAP (mm)
MATERIAL
NON FERROMAGNETIC
FERROMAGNETIC
ITEM
CTC1501
CTC1503
CTC1502
CTC1505
CTC1501
CTC1503
CTC1502
CTC1505
Y
CLOSED
20+/-3
25+/-3
30+/-3
70+/-5
14+/-3
15+/-3
20+/-3
35+/-5
OPEN
24+/-3
30+/-3
34+/-3
75+/-5
18+/-3
18+/-3
22+/-3
38+/-5
X
CLOSED
+/-12+/-2
@y=10
+/-15+/-3
@y=15
+/-20+/-3
@y=11
+/-25+/-5
@y=10
+/-10+/-2
@y=6
+/-12+/-2
@y=6
+/-18+/-3
@y=6
+/-15+/-5
@y=10
OPEN
+/-14+/-2
@y=10
+/-17+/-3
@y=15
+/-23+/-3
@y=11
+/-30+/-5
@y=10
+/-12+/-2
@y=6
+/-14+/-2
@y=6
+/-20+/-3
@y=6
+/-18+/-5
@y=10
Z
CLOSED
+/-20+/-3
@y=10
+/-20+/-3
@y=15
+/-22+/-3
@y=11
+/-50+/-5
@y=10
+/-14+/-3
@y=6
+/-20+/-3
@y=5
+/-22+/-3
@y=6
+/-25+/-5
@y=10
OPEN
+/-24+/-3
@y=10
+/-23+/-3
@y=15
+/-25+/-3
@y=11
+/-60+/-5
@y=10
+/-18+/-3
@y=6
+/-23+/-3
@y=5
+/-25+/-3
@y=6
+/-30+/-5
@y=10
CHARACTERISTICS (passive component)
NC max value applicable:
0,125 mA / 30 Vcc / 3 W
TAMPER max value applicable:
1 A / 60 Vdc, 42,2Vpeak
Input hole:
PG9
Material:
Die cast aluminium white
IP rating:
IP65, INOX screws
Temperature:
-25/+60°C
Standard:
EN50131-2-6
Vimo Elettronica s.n.c di Cavalleri R. L. & C
Via dell’Artigianato 32/Q 20865 Usmate Velate (MB)
Tel: [phone], fax: [phone], e-mail: [e-mail] www.vimo.it
C.F.: 05096770150 P.IVA: 00804240968 C.C.I.A.A. DI MB REA MB-1176225
X
Y
Z