Vinotemp VT-BLKBEV User manual

A PROUD HERITAGE OF EXPERIENCE & QUALITY
BEVERAGE COOLER
VT-BLKBEV
OWNER’S MANUAL
WWW.VINOTEMP.COM

General Operating Instructions
Remove all external and internal packaging from your beverage cooler. Be sure
that all parts have been included before discarding any packaging materials. You
may want to keep the box and packing materials for use at a later date.
Upon receipt and inspection of unit, the supply cord must be replaced if it is
damaged. Contact our customer service at 1-800-777-8466 or [email protected].
•Let the unit rest UNPLUGGED for 24 hours once you have it placed in your
home.
•Please fully read the instruction manual.
•Save these instructions.
Please read and follow all safety rules
and operating instructions before using.
2
WWW.VINOTEMP.COM

Table of Contents
PARTS AND SPECIFICATIONS......................................... 4
IMPORTANT SAFETY INSTRUCTIONS............................... 5
CORD INSTRUCTIONS................................................... 6
BEVERAGE COOLER INSTALLATION................................. 6
OPERATING INSTRUCTIONS........................................... 7
TEMPERATURE CONTROL............................................... 7
INSTALLING AND REMOVING SHELVES ........................... 8
CLEANING AND CARE.................................................... 9
MOVING YOUR BEVERAGE COOLER................................. 9
TROUBLESHOOTING ....................................................10
TERMS OF SALE AND WARRANTY...................................11
SERVICE & IMPORTANT NOTICE ....................................12
3
17621 South Susana Road, Rancho Dominguez, California 90221
[e-mail]

PARTS AND SPECIFICATIONS
1. Temperature Control Panel
2. Hinge Cover
3. Recessed Handle
4. Standard Shelf
5. Foot
Type 1 Temp.
Item Number VT-BLKBEV
Dimension (HxWxD) 32.75"×19.5"×17.25"
Weight 59 Lbs
Power Consumption 1.2 kW.h/24h
Cooling System R135a/60g
Ambient Temp. Range 60～90°F
Temperature Range 32～50°F
Rated Voltage 120V
Rated Frequency 60Hz
Input Power 104W
5
1
2
3
4
4
WWW.VINOTEMP.COM

IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be followed to reduce
the risk of fire, electric shock, and personal injury.
1. Use this appliance only as described in this manual. Other uses are not
recommended and may cause fire, electric shock or injury.
2. This product is intended for indoor, household use.
3. Do not place heavy items on top of the unit.
4. To protect against electric shock, do not immerse unit, plug or cord in water
or other liquids. Avoid locating the unit in moist areas.
5. Never allow children to operate, play with, or crawl inside the unit.
6. Unplug from the outlet when not in use, when moving from one location to
another, or before cleaning.
7. To disconnect the appliance, grip the plug and pull it from the wall outlet.
Never pull by the cord.
8. Do not operate the appliance in the presence of explosive and/or flammable
fumes.
9. Do not place the appliance or any of its parts near an open flame, cooking
or other heating appliance.
10. Do not operate the appliance with a damaged cord or plug. If the product
malfunctions, or if it is dropped or damaged in any manner, do not use.
11. The use of attachments is not recommended and may be hazardous.
12. Do not operate if the housing is removed or damaged.
13. A loose fit plug may cause overheating and a distortion of the plug. Contact
a qualified electrician to replace loose or worn outlets.
14. This appliance is designed for freestanding use only (not meant for built-in
installation).
15. The beverage cooler is intended for use in a controlled ambient location
such that the ambient temperature does not exceed 90°F.
16. Locate the unit away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect/alter the outside color of the
appliance.
17. Dismantling the unit by a non-professional is hazardous and prohibited. In
case of malfunction, contact a qualified professional for service.
WARNING: To reduce the risk of fire, electric shock or personal injury, unplug or
disconnect the appliance from the power supply before servicing.
WARNING: Risk of child entrapment. Before you throw away your old beverage
cooler, take off the door and leave the shelves in place so that children may not
easily climb inside.
5
17621 South Susana Road, Rancho Dominguez, California 90221
[e-mail]

6
WWW.VINOTEMP.COM
CORD INSTRUCTIONS
For your protection, this unit should be properly
grounded. Unit is equipped with a 3-conductor
cord set that has a molded 3-prong grounding-
type plug, and should be used in combination
with a properly connected grounding-type outlet as
shown in figure A.
It is not recommended to use this beverage
cooler with an extension cord or power board. Please ensure that the appliance is
plugged directly into the electrical outlet.
BEVERAGE COOLER INSTALLATION
•Remove the exterior and interior packaging before use.
•Check to be sure you have all cooler parts and 1 owner’s manual.
•Place your beverage cooler on a flat, dry surface that is strong enough to
support the unit when fully loaded.
•This unit is designed for freestanding installation only.
•Do not place heavy objects on top of the unit.
•Unit is not designed for installation in a garage, basement, or any other location
where a controlled ambient environment between 60° and 90°F cannot be
maintained.
•Do not place the unit in direct sunlight or near sources of heat. Extreme hot and
cold ambient temperatures may cause the unit not to perform properly or
increase electrical consumption.
•Do not place the unit next to a major appliance that emits large amounts of heat,
such as a dishwasher, microwave, oven, etc.
•Do not plug unit into the same outlet as a refrigerator or microwave.
•Before connecting the appliance to the power source, let it stand upright for
approximately 24 hours. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
•Clean the interior surface with lukewarm water using a soft cloth before first use.
•The unit is designed for freestanding installation only. It is not designed to be
installed under a counter, inside a cabinet, or in any location that does not allow
the proper clearances on all sides, as stated above.
•IMPORTANT: To function correctly, beverage cooler needs a minimum of 10-12
inches clearance on each side and 6 inches clearance at the back.

7
17621 South Susana Road, Rancho Dominguez, California 90221
[e-mail]
OPERATING INSTRUCTIONS
1. Gently place/slide the racks into the beverage cooler.
2. Determine the best temperature setting to use.
3. Place beverage containers inside the cooler.
4. Plug the power cord into a standard grounded electrical outlet.
5. Limit the frequency of opening the door to conserve energy and maintain
proper storage temperature.
6. You can turn the interior light on and off by switching the black light button
located on the control panel into the “On” position.
Important: When using the beverage cooler for the first time, allow at least 24
hours for the internal temperature to adjust properly. Make sure there are at least
3 to 5 beverage containers in the unit.
TEMPERATURE CONTROL
Your beverage cooler has a temperature control knob that is located on the interior
ceiling panel.
Setting the temperature:
To control the internal temperature, adjust the control knob to achieve the desired
temperature. The temperature inside the beverage cooler can be adjusted from
Max Temp (level “5”) to Min Temp (level “1”). To turn off the appliance, turn the
temperature control knob to the “0” setting and unplug the appliance. The
temperature range for this unit is from 32°F (0°C) to 50°F (10°C).
The cooler should be set to level “2” when ambient temperature is high (such as in
summer), and level “4” when ambient temperature is low (such as in winter).
Important: In order to operate efficiently, this product should be in an
environment with an ambient temperature of less than 90°F.
Light Switch
Temperature Control
Knob

INSTALLING AND REMOVING SHELVES
To prevent damaging the door gasket, make sure to have the door completely
opened when pulling the shelves out of the rail compartment.
•For easy access to the storage content, you must pull the shelf conservatively
out of the rail compartment.
•When removing the shelf out of the inner rail, make sure to remove all items
first. Then simply slide the shelf out along the inner rail. In order to replace
the shelf, repeat these directions in reverse.
8
WWW.VINOTEMP.COM

CLEANING AND CARE
•Always unplug the beverage cooler before cleaning.
•Do not use benzene, scrubbing brushes or chemical cleaners as these will
damage the unit.
•Use only a mild, nonabrasive cleanser to clean the exterior of the cabinet.
•Clean the display door and cabinet body by wiping with a warm water and mild
detergent solution.
•Wash the racks with a mild detergent solution.
•Always dry all parts with a clean dry cloth before plugging the beverage cooler
back into the receptacle.
•When cleaning the door gasket, remove from the door then wash and dry
thoroughly before re-sealing.
•If heavy frost accumulates on the evaporator after prolonged use, empty the
contents of the cooler and disconnect the power. Frost will melt automatically.
After the frost has melted, clean up the water and re-connect the power.
•To reinstate the light bulb, remove the lamp shade and change out the old bulb
with a new one. Re-affix the lamp shade when replacement is finished.
MOVING YOUR BEVERAGE COOLER
•Always unplug the beverage cooler before moving.
•Always remove all beverage containers before moving the beverage cooler.
•Securely tape down all loose items (including shelves) inside your appliance.
•Tape the door shut.
•Be careful of cabinet legs to avoid damage when moving.
•Be sure the beverage cooler stays in the upright position during transportation
•Protect the outside of the appliance with a blanket or similar item when moving
as needed.
9
17621 South Susana Road, Rancho Dominguez, California 90221
[e-mail]

TROUBLESHOOTING
You can solve many common beverage cooler problems easily, saving you the cost
of a possible service call. Try the suggestions below to see if you can solve the
problem before contacting Vinotemp at [email protected].
SYMPTOM POSSIBLE CAUSE
Door will not close
properly.
•The beverage cooler is not level.
•The shelves are out of position.
•The door gasket is dirty.
•
A beverage container in the cooler is not the correct size.
Unit does not
operate—does not
have power
•Check that unit is plugged into the wall socket.
•Make sure the wall socket has power. If outlet is controlled
by a wall switch, make sure switch is set to on. Test wall
socket functionality by testing another electrical appliance
in the power socket.
Power is ON but
the unit will not
cool.
•Make sure there are at least 3 to 5 beverage containers in
the unit. When using the unit for the first time, it can take
up to 24 hours to reach the desired temperature.
•If the room temperature is at the high end of the ambient
temperature range, it may have more difficulty achieving
a low internal temperature.
•To achieve accurate temperature control, the unit should
not be used or operated in any of the following locations:
oIn a sunny place, a room with poor air circulation such
as a garage.
oNear another heat-producing appliance such as a
dishwasher, oven or refrigerator.
oWith an outlet shared with a refrigerator, as the
refrigerator will drain power from the beverage cooler.
•Make sure the cooler has proper clearances at side and
rear and is located in a well-ventilated area.
•Door is not closed tightly or is being opened too
frequently.
Fan is always
running.
•This is simply a function of the cooling system. The lower
the setting, the more the fan will run. If the room is very
warm, the cooler will run more.
•The unit has been designed to run continuously when
operating at the lower temperatures.
Vibrations •Check to make sure the beverage cooler is level.
•Check to make sure that there are no pipes touching the
compressor.
Frost appears in
cabinet (on back). •Either too much humidity or too low of temperature inside cabinet. Unplug cooler and allow to manually defrost.
Reconnect when ice has melted. If problem persists,
contact for service instructions.
Compressor
continually runs. •If there is no frost on the surface of the evaporator the refrigeration system may be leaking or is blocked. Contact
for service instructions.
10
WWW.VINOTEMP.COM