Vintage view IDR Series User manual

1. Assemble frame - Thread footer pads into the bottom of the
uprights. Lay down one upright and attach all three crossrails using
the provided crossrail assembly screws in predrilled mounting holes.
Do not fully tighten to allow for adjustments during assembly.
Standing rst upright up, attach second upright to crossrails.
2. Attach racks to frame - Using two base cradling racks, and
starting on the left side of the assembled frame, align the mounting
holes in racks with the holes on crossrails. Temporarily place
alignment tool through center hole in rst rack, crossrail and the
center hole in second rack, as shown. Attach racks to crossrails as
shown. After securing top and bottom of racks, remove alignment
tool and replace with assembly screw. Repeat for each rack set,
alternating between base and neck sets.
†IDR Extension packages contain only 1 IDRx-UPRIGHT and 2 footer pads.
Hardware shown
actual size
6 X
WS33
or
WS43 4 X†
Footer Pad
3 X IDR-CR3
1 X
IDR-PR
2 X†
IDR3-UPRIGHT
or
IDR4-UPRIGHT
12 X
Crossrail Assembly
Screw
3 X
IDR-PR Assembly
Screws
18 X
WS Assembly
Screw
2 X
IDR-PR Assembly Bolt
4 X
IDR-PR Assembly
Washer
Required tools: IDR-AK - included with IDR and contains an
8mm Nut Driver and Alignment Tool
Electric Screw Driver with #2 Phillips Bit
2 X 14mm (or adjustable) Wrench
Island Display Rack (IDRx) Assembly Instrucons
Wine Master Cellars, LLLP • 10645 E 47th Ave, Denver, CO 80239 • phone: [phone] • fax: [phone] • VintageView.com

3. Assemble presentation rack – Position presentation racks
back to back as shown. Using nut driver (included), a Phillips
head screwdriver (not included) attach presentation racks with
presentation rack assembly screws. Fully tighten.
4. Mount presentation rack to frame – Align presentation
rack mounting plate to the mounting hole on upright. With the
presentation rack assembly bolt, and washer, insert bolt through
presentation rack and upright, complete with second washer, and
nut. Tighten with 14mm open end wrench (not included). Repeat
for second side.
5. Finishing steps – Fully tighten all screws (especially Crossrail
Assembly Screws) and snap mounting hole covers in place. Fill with
wine and enjoy!
Please call us toll free at 866-650-1500 for assembly assistance or to request replacement parts.
VintageView.com
Lifetime Warranty
Wine Master Cellars, LLLP (WMC) warrants to the original consumer-
purchaser that this product shall be free from defects in workmanship
and materials under normal and reasonable use for the lifetime of the
product. WMC will, at its option, renish or replace any product or
part found to be defective during the warranty period and excludes
installation charges, shipping costs, and the cost of removal and
reinstallation. WMC may require you to return the part(s) claimed to be
defective, for its inspection - freight or postage prepaid.
This warranty does not include the cost of any inconvenience or
property damage due to the failure of the product and does not cover
damage due to Devine Act, third party act out of the control of WMC,
misuse, abuse, accident, or damage arising out of transportation of
this product. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER OBLIGATIONS, LIABILITIES OR WARRANTIES AND THERE IS
NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
In no event shall WMC be liable or responsible for INCIDENTAL OR
CONSEQUENTIAL DAMAGES or for any other direct or indirect damage,
loss, cost, expense, or fee. Neither the WMC distributor nor the retail
establishment selling this product has any authority to make any
warranties or to promise remedies in addition to or inconsistent with
those stated above. WMC’s maximum liability, in any event, shall not
exceed the purchase price of the product paid by the original consumer-
purchaser.
All matters regarding the sale of the product or this warranty shall
be governed by the laws of the state of Colorado and the exclusive
jurisdiction of and venue for any warranty claims or claims directly
or indirectly related to the sale of the product shall be Colorado. Any
claim, or action relating the purchase of the product or this warranty
must be led no more than six (6) months after the date the claim
arose. All statute of limitations to the contrary are waived.
Some states do not allow the exclusion or limitation of incidental
or consequential damages. In such case, the above limitations or
exclusions may not be applicable. This warranty gives you specic legal
rights and you may also have other rights which vary from state to
state.