Vintage 1815 CHRONOGRAPH User manual

1815 CHRONOGRAPH

INTRODUCTION
To name each model, we looked back in time to find
important moments in the history of horology to
aknowledge those milestones
1815 was an important year - it was the year the
chronograph technique was invented. With its classic
design details, the first designed timepiece in the
Skov Andersen collection could therefore be named
nothing else than 1815
For us, Vintage is not just a reference of style
- it is the journey to becoming it.
The journey (life) wil take you through
evenfull moments and memorable days to
occasions that change your whole perspective.
We hope that one day your About Vintage watch will
help you bring back memories of the special times in
your life.

SPECIFICATIONS
Caliber: MIYOTA S
Batery / Batery life: SRW (recommended) Approx. 3 years
Glass: Domed Sapphire Crystal with anti-reflective coating
Water Resistance: 5. ATM - Water tested to 50 Meters
Suitable for showering and swimming in shallow
water ( Without leather strap )
HOW TO SET TIME
1. Pull the crown out to the 2nd click position
2. Turn the crown clockwise to set hour and minutes hand.
3. Push the crown back into normal position.

SETTING THE DATE
1. Pull the crown out to the 1st click position
2. Turn the crown clockwise to set the date.
(If the date i set between the hours of 9:00 PM and 1:00 AM, the date may
not change the following day)
3. Push the crown back into normal position.
USING THE CHRONOGRAPH
This chronograoh is able to measure and display time in 1/4 second united up
to maximum of 59 min. 59 sec.
MESSURING TIME WITH THE STOPWATCH
Press buton “A” to start the chronograph
The chronograph can be started and stopped each time buton “A” is pressed.
Press buton “B” to reset the chronograph minute and seconds hands.
The chronograph hands will return to their Zero positions.
CHRONOGRAPH RESET ( INCL: AFTER REPLACING BATTERY )
This procedure should be performed when the chronograph second hand
does not return to the Zero position.
1. Pull the crown out to the 2nd click position
2. Press the buton”A” to set the chronograph second hand to the Zero
position ( The chronograph hand can be advanced rapidly by continuously
pressing buton”A”)
3. Once the hands are set at Zero postion, reset the time and return the
crown to its normal position.