Vintage 1926 AUTOMATIC User manual

1926 AUTOMATIC

INTRODUCTION
To name each model, we looked back in time to find important
moments in the history of horology to aknowledge those milestones
Mankind have been exploring the underwater world for centuries, and
1926 was a game changing year for all sea explorers. Made with a
hermetically sealed case for optimal protection the first waterproof
wristwatch marked a major step forward - making timekeeping
underwater an everyman luxury.
Our first diver is a humble celebration of that remarkable achievement.
We hope that our 1926 At’sea will take you on your very own adventure,
both below and above the big blue ocean.
For us, Vintage is not just a reference of style - it is also the journey to
actually becoming vintage.
The journey ( Life ) will take you through evenful moments and
memorable days to occasions that change your whole perspective
We hope that one day your About Vintage watch will
help you bring back memories of the special times in your life.

SPECIFICATIONS
Caliber: Miyota 8215 Automatic (Japanese)
Power Reserve: 42 Hours
Glass: Super Domed Sapphire Crystal
with antireflective coating.
Water Resistance: 10 ATM – Water tested to 100 meters.
SPECIFICATIONS
Caliber: TMI VH (Sweep seconds)
Batery / Batery life: SRSW (recommended) Approx. 2 years
Glass: Domed Sapphire Crystal
Water Resistance: 10. ATM - Water tested to 100 Meters
Suitable for swimming
HOW TO SET TIME
1. Unscrew the crown counterclockwise and pull out to first click position.
2. Turn the crown to set hour and minutes hand.
3. Push the crown back into normal position.
4. Allways securely screw in the crown.
You do so by pushing the crown towards the watch while screwing it
clockwise until it’s 100% tight.
If this is not done correctly you risk that moist
and dust will enter your watch!

HOW TO SET TIME
1. Unscrew the crown counterclockwise and pull out to second click position.
2. Turn the crown counter clockwise to set hour and minutes hand.
3. Push the crown back into normal position.
4. Allways securely screw in the crown.
You do so by pushing the crown towards the watch while screwing it
clockwise until it’s 100% tight.
If this is not done correctly you risk that moist
and dust will enter your watch!
HOW TO SET DATE
1. Pull out the crown to the first click position.
2. Turn the crown counterclockwise for date seting.
* Do not set the date between 9:00 P.M. and 4:00 A.M. as this
will cause a malfunction.
HOW TO WIND UP THE MAINSPRING
1. Rotate the crown clockwise at normal position.
2. Wind turning the ratchet wheel screw 8 times. It will start to move naturally
ater shaking slightly.
(with winding machine. Full wind up conditions
rotary speed : 30 rpm Operating time : 60 minutes.)
ACCURACY
1. Static Accuracy : -20〜+40 seconds per day