virtual i V8901-X-ESD User manual

O ERATING INSTRUCTIONS AND S ECIFICATIONS
V8901-X-ESD
EN-VAC® VACUUM TWEEZER
ESD Safe
Model No. V8901
ALL SERIES
01/01/09
Virtual Industries, Inc.
RODUCT WARRANTY
LIMITED 90 DAY WARRANTY
Above named company warrants to the original consumer purchaser that shall be free from
defects in material and workmanship for a period of 90 days from the date of purchase. If a
defect covered by this warranty occurs during the 90 day warranty period, return the unit to
above named company for repair or replacement of the unit, at the option of the above
named company. For the correct address and return authorization call:
1-800-530-8377 or [phone]
This warranty does not cover damage or malfunctions resulting from improper handling,
accident, misuse, abuse, failure of electrical power, use with other products not
manufactured by the above named company, damage while in transit for repairs, repairs
attempted by any unauthorized person or agency, or any other reason not due to defects in
materials or workmanship. This warranty is also void if the serial number has been altered,
defaced or removed.
THE ABOVE WARRANTIES FOR GOODS ARE IN LIEU OF ALL WARRANTIES,
EX RESS, IM LIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO THE IM LIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A ARTICULAR UR OSE.
THE ABOVE NAMED COM ANIES LIABILITY IS LIMITED SOLELY TO THE RE AIR OR
RE LACEMENT OF THE UNIT IN ITS SOLE DISCRETION, AND IN NO EVENT SHALL
INCLUDE CONSEQUENTIAL COSTS, EX ENSES OR DAMAGES INCURRED BY THE
URCHASER, INCLUDING WITHOUT LIMITATION ANY DAMAGE TO RODUCTS
BEING HANDLED, EVEN IF THE ABOVE NAMED COM ANY HAS BEEN ADVISED OF
THE OSSIBILITY OF SUCH DAMAGES.
THE ABOVE NAMED COM ANY shall have no obligation to enhance or update any unit
once manufactured.
Some states do not allow limitations on how long any implied warranty lasts so the above
limitations may not apply to you. Some states do not allow the exclusion or limitation or
incidental or consequential damages, so the above limitation or exclusion may not apply to
you. This warranty gives you specific legal rights, and you may also have other rights which
may vary from state to state.
Virtual Industries, Inc.
2130 Victor Place
Colorado Springs, CO 80915
U.S.A.
Product arranty

1. Select a probe with a
vacuum cup that is
slightly smaller in
diameter to the outline
of the parts that you
want to pick and place.
Securely install it on
the tapered end of the
vacuum handle.
Selecting a vacuum
cup that is too large or
too small will result in
improper operation.
2. To pick and place a
part:
a. lace index finger on
vacuum button and
push in, hold this
position and gently
place the vacuum cup
on top of the part that
you wish to pick up,
now release button, the
part should now be
firmly grasped by the
vacuum cup.
b. Now move the part to
where you want it.
c. To release the part
simply push vacuum
button in.
Operation of the V8901-X-ESD
VACUUM USH
BUTTON
OCKET CLI
REMOVABLE
CA FOR
REAR
STORAGE
(Available on
standard unit
only)
ESD SAFE:
STATIC DISSA ATIVE LASTIC NOZZLE
DIMENSIONS:
LENGTH DIAMETER
5.75” (146mm) .50” (1.27mm)
EIGHT:
.060 OZ.
V8901-X-ESD OPTIONS
SELECTION OF VACUUM CU S WITH ROBES
The vacuum cups are a soft rubber material that allow handling a wide variety of small
parts.
VACUUM EN HOLDER VBM-3
Bench mount holder with posts to accommodate up to eight of our luer slip vacuum tips.
The holder can be used to hold any of our vacuum handles or vacuum pens and helps
protect the vacuum tips when not in use.
For technical assistance call toll free 1-800-590-2829
Tele: 719-572-5566
Fax: [phone]
8:00 A.M. to 4:30 .M. Mountain Standard Time
Specifications