Vitea Care PROMYK PLUS User manual

Instrukcja używania
Instructions for use
PROMYK
PROMYK PLUS
Children’s rehabilitative stroller
PROMYK
PROMYK PLUS
Wózek inwalidzki specjalny
dziecięcy
222
RGB: 178/178/177
CMYK: 0/0/0/40
#HEX:B2B2B1
RGB: 40/52/121
CMYK:100/91/19/03
#HEX:283479
Numer katalogowy/catalog number: DRVG0L / DRVG0M

MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01
2 VITEACARE.COM
Instructions for use
TABLE OF CONTENT
3
3
6
6
6
10
12
18
19
1. Introduction
2. Product description
3. Indications
4. Contraindications
5. Usage
6. Safety of use
7. Everyday use and maintenance
8. Technical parameters
9. Symbols
10. Contact details 20
PLEASE READ WHOLE INSTRUCTION CAREFULLY BEFORE USE

MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01VITEACARE.COM 3
1. INTRODUCTION
Thank you for choosing our product. We are deeply convinced that it will meet
your expectations. Please read this document before rst use. This manual
is passed in order to provide the necessary information for the safe use of
the device. The correct application of the recommendations will contribute
signicantly to extend the durability and aesthetics of the product. We want to
emphasise that constantly we are trying to improve the quality of our products,
which may result in minor changes that are not included in the manual.
2. PRODUCT DESCRIPTION
Illustration 1
1. Handle; 2. Lever for changing the seat angle and backrest; 3. The side lock;
4. Rear wheel; 5. Canopy; 6. Head stabilizer; 7. Safety belts; 8. Front guard;
9. Wedge; 10. Foot stabilizing belts; 11. Footrest; 12. Front wheel
1
2
3
4
5
6
7
8
9
10
11
12

4 VITEACARE.COM
MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01
ELEMENTS THAT SHOULD BE INSIDE PACKAGING
Illustration 2
Illustration 3
Illustration 4
Stroller
Front guard
Canopy
buckles
brackets

MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01VITEACARE.COM 5
Illustration 5
Illustration 6
Illustration 7
Head stabilizer
Sleeping bag
Abduction wedge

6 VITEACARE.COM
MODEL: PROMYK
LANGUAGE:ENGLISH VERSION: 2022-01
3. INDICATIONS
The stroller is designed for children with disabilities and / or dysfunctions movement
activities as a result of damage of the CNS Central Nervous System. It can be used in
children with CP Cerebral Palsy, myelomeningocele, muscle disorders, dysfunctions
of the lower limbs. The maximum users weight 75 kg.
4. CONTRAINDICATIONS
Contraindications against sitting position.
5. USAGE
• After unpacking the box, check if it contains all parts in accordance with the list of
elements set out above.
• Ensure that all components have no visible damage. If any doubts, please contact
the manufacturer.
• Do not use the stroller until all parts are properly connected.

MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01VITEACARE.COM 7
UNFOLDING THE STROLLER
Unfold the stroller by pulling the frame with the handle to guide the stroller backwards
(Illustration 8.). Then set the stroller backrest to the same position. To do this, unlock
the side levers (by turning them so that they are horizontal).
• To prevent unplanned stroller movement, block the rotation of both rear wheels
(activate the foot brake – Illustration 16.).
• When the frame and backrest are set at the desired angle, lock the levers - turn
them to a vertical position - one lever pointing down, the other up.
• The stroller frame is equipped with a side block. To lock the side frame, slide the lock
eye onto the free end of the frame (Illustration 10. and 11.)
Lever for
changing the
seat angle and
backrest
Illustration 8 Illustration 9
Illustration 10 Illustration 11

8 VITEACARE.COM
MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01
• The barrier should be placed in the holes of the frame, and then attach the seat to
the frame by means of clamps with pin (Illustration 12.).
Illustration 12
Then mount the headrest. To do this, unfasten the head stabilizer Velcro, choose the
appropriate setting, and then pull it to the back of the Velcro through the holes in the
upper part of the backrest upholstery, then fasten it.
• To attach the canopy, slide the canopy attachment from top to bottom into the guide
on the stroller frame (Illustration 13.).
• Sleeping bag mount if only the child is properly fasted with the seatbelt (Illustration
15).
• To mount the sleeping bag, start from the bottom by hooking it on the footrest.
• The upper part of the sleeping bag is equipped with Velcro which should to be
attached to the side frames of the stroller.
Illustration 13
Clips
Attach canopy
handles here
• Make sure that the barrier is properly fastened.

MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01VITEACARE.COM 9
Side
upholstery
Illustration 14 Illustration 15
FOLDING THE STROLLER
• To fold the stroller, remove the canopy, front guard and abduction wedge.
• Unlock both side locks (Illustration 10., 11.).
• Lock the rear wheels (Illustration 16.).
• Unfasten the side parts of the upholstery and fold them inside the stroller (Illustration 15.).
• After unlocking the lever on both sides of the stroller, fold the frame (pointing it
downwards), and then lightly press (Illustration 8., 9.).
• The footrest must be folded. To do this, loosen the wing knob and from the horizontal
position move the locking part to the vertical position.
• Then pull the footrest slightly up so that the blocking part goes to the other side.
• Make sure that the footrest is removed from the positioning holes.
Illustration 16 Illustration 17
Illustration 18
WARNING! Failure to follow these guidelines can result in damage to the wheelchair.
Wing knob

10 VITEACARE.COM
MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01
6. SAFETY OF USE
a) Before using the stroller, refer to this manual and keep it for future reference.
b) Your child’s safety may be compromised case of non-compliance of rules contained in this
manual.
c) Never leave the child unattended. Always watch the child when he/she is in the stroller.
Responsible for the safety of the child are catretakers.
d) The seat is not suitable for children under 6 months.
e) Always use the seat belts to avoid serious injuries caused by the child falling out or slipping
out of the stroller.
f) It is important to fasten seat belt properly and its adjustment to the user.
g) The seat and belts do not replace proper supervision of caretaker.
h) While adjusting the parameters of the stroller, the child should not be in a stroller.
i) All repairs must be carried out by qualied personnel and during warranty period only by the
manufacturer’s service.
j) The stroller is not suitable for running or iceskating.
k) The stroller is designed for transporting only one child.
l) It is unacceptable to use the stroller, if you found visible or palpable damage, or worn out
parts and stroller parts indicates a potential risk of an accident (eg. Consumption wheels,
upholstery, cracks, etc.).
m) Always check before use if the stroller is properly unfolded. Ensure that all locks are
blocked before use.
n) To avoid injury, make sure that the child is away when the product is being folded and
unfolded.
o) When moving the stroller through doors and other passages, make sure that on both sides
there is enough space to avoid injury of hands or damage the stroller.
p) Do not allow your child to play with this product.
q) Do not allow your child to stand on the stroller or footrest. The stroller might fall over and
hurt the child.
r) When in motion, always hold the handle of the stroller.
s) Be especially careful while using the wheelchair near to steps and stairs.
t) The stroller is not intended for use on stairs and escalators.
u) Do not move the stroller if a child is sitting in it.
v) Do not to move the stroller by holding the front guard. If there is a need to move your
stroller, you should hold the xed elements of the frame.
w) In order to avoid accidental rolling o󰀨 the stroller, always put on the brakes and turn on the
lock of driving direction when the stroller is stopped, when patient get in, get o󰀨, changing the
position.
x) Do not let the child stand on the footrest. Never leave the stroller unattended on sloping
ground, even if the brakes are on.
y) The stroller is designed for children up to 75 kg.

MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01VITEACARE.COM 11
z) Stroller should always be easy to fold out. In case of problems with unfolding. You should
re-read the user’s manual or contact the manufacturer.
aa) Keep extreme caution while passing an obstacles. Extreme use of the stroller could
cause damage or destroy it.
bb) Never use the stroller as a seat for the transportation of people in cars, buses or any
motor vehicles.
cc) During transport (eg. In the trunk), do not burden stroller, it may weaken or damage its
structure.
dd) Do not leave the stroller with the user close to open sources of re.
ee) Be aware that the surface temperature of the upholstery and the frame parts may
be increased after exposure to the sun or other heat source. Furthermore, with low
temperatures there is a danger of overcooling metal parts of stroller. It may cause burns or
frostbite parts of the body.
󰀨) Keep caution while moving on sloping surfaces. The maximum allowable slope angle up
and down is 5%.
gg) With the stroller you can only use on surfaces where all four wheels touching the
ground.
hh) Stroller is designed for use indoors and outdoors only on paved and even surfaces.
ii) Use of the product i.e. The icy, wet, greasy, strongly gritty surfaces is unacceptable - it
creates a risk of falling.
jj) It is extremely important to keep all strollers components clean in order to maintain the
product parameters.
kk) Do not add additional loads (bags, etc.) on the stroller handles.
ll) Storing the stroller in areas with very high humidity (baths, laundry, etc.) or in the open
air, also the lack of hygiene causes rapid loss of operating parameters and aesthetic of the
product.
mm) Accessories, which were not approved by the manufacturer are not included in this
manual, cannot be used.
nn) Do not leave the child in the stroller for longer, because persons with neurological
a󰀨ections who stay in unchanged positions may experience problems with skin nourishment
and cause bedsores.
oo) When the footrests will not be removed before folding the stroller, itcan cause damage.
During use, handing of the product and during its assembly, regulating mechanisms, it
might happen trapping and / or squeeze user’s or caretaker’s body part in holes/gaps
between the elements. Perform these steps with extreme caution. After adjustment,
stabilize the position by carefully tightening the nuts / bolts.

12 VITEACARE.COM
MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01
7. EVERYDAY USE AND MAINTENANCE
SWITCHING ON BRAKE
• The rear wheels are equipped with brake system.
• To prevent unplanned movement of the stroller, switch on brakes on two rear wheels.
(Illustration 19.)
Illustration 19 Illustration 20
Brake lever
• To do this, move the brake lever to the left (Illustration 20.).
• To unblock the brake, reverse the movement to apply the brake.
LENGTH OF FOOTREST ADJUSTMENT
• To change the length of the footrest, remove two footrest locks on both sides of the
footrest (Illustration 21.).
Illustration 21
Footrest lock

MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01VITEACARE.COM 13
• Select required length on the footrest, by using the holes in footrest frame.
• Next insert the footrest locks into the holes.
• It is important that each side footrest locks were placed in holes at the same height.
FOOTREST REGULATION
• To change the position of the footrest up or down, move the attachment element. To do
this, lift up the knob and then put in the appropriate hole (Illustration 22.).
Illustration 22
Knob
Fastening element

14 VITEACARE.COM
MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01
BELT SYSTEM
Illustration 23 Illustration 24
Shoulder
belts
Belts
adjustment
elements
Seatbelt
three-point
buckle
• The stroller is equipped with a stabilizing belts whose length can be adjusted
(Illustration 20.).
• Settings of all stabilizing elements should be discussed with your doctor or physiotherapist.
• To ensure safety, after placing the child in the stroller, caretaker should immediately buckle
them into stabilizing belts.
• Security system include three-point seat belts with central buckle and lap belt with buckle.
• Shoulder belts should run along the child body from the shoulders to the waist.
• Both elements of the buckle should be placed in the central fastener. To do this, press the
button on the buckle and place the elements (Illustration 24.).
• While placing elements of buckle into central buckle there must be a click. Only if click is
heard, three-point belts are properly fastened.
• To properly protect your child, adjust the length of the belt using the adjustment belt
elements.
• To unfasten three-point belts, press the button on the central part of three-point seat belt
and unfasten the lap belt buckle.

MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01VITEACARE.COM 15
ADJUSTING THE ANGLE OF THE SEAT
• The stroller is equipped with a lever to change the angle of the seat.
• To change the seat angle, turn both levers from the vertical position to the horizontal
position.
• Grab the upper part of the backrest and move it up or down to set the desired angle.
• When the seat is adjusted to the desired angle, lock the levers on both sides of the
stroller (vertical position).
MOVING ON SLOPES
• While moving on slopes, use caution and reduce your speed.
• Do not move on too high slopes. The maximum allowable slope angle up
and down is 5%.
ENTRANCE TO THE THRESHOLD OF CURBS
• To enter stroller to the threshold or curb, it must be set so that the front
wheels were set on straight ahead threshold or curb and near to it.
• Then place a foot on the lock back of stroller, press lightly and push the
handle down.
• The front wheels of stroller will lift slightly upwards, what allows to
overcome the obstacles.
• Once the front wheels are on the obstacle, raise the rear wheels by tilting
the stroller frontward.

16 VITEACARE.COM
MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01
PUMPING TYRES
Illustration 25
Presta valve
• Before pumping the tires, identify the type of valve which is located on the tire. This may
be one of the two valves shown in Illustration 25 and 26.
• Prest valve also has an additional small top, which must be loosened before pumping.
• After identifying the valve, prepare the pump designed to valve type.
• Most of the new pumps are equipped to service both Prest and Schrader valve. Many of
them let to reverse the tip. Smaller hole is Prest valve, Schrader valve greater. If the pump
does not support Prest, you will need to buy yourself one with the „Prest adapter”, which is
available at any bike store.
• At this point, if the wheel is provided with a valve Prest, it will be necessary to unscrew the
top located on the vent. It is a small top, which can be unscrewed with ngers. When doing
this, the top should move upwards. Then valve is considered open.
• Then remove the plastic top from the valve and set it aside in a safe place. It is important
to not lose it, because the valves will get dirt, leading to di󰀩culties in pumping and rapid air
loss.
• Place the nozzle of the pump to the valve and check if it stick properly. If it is needed, push
the pump to the valve to make sure that the air does not go to the sides.
• If the pump has a lever with clamp at the nozzle, tighten it. If the nozzle of the pump and
valve have a threaded tip, screw them together. As a result, air will be streamed directly to
the inner tube and the nozzle can not detach from the valve.
• At the beggining of pumping the pressure in tyres should be checked at some points.
Check tire pressure with your thumbs at the end of the tread. If it is possible, make only a
millimeter indentation. It means that the tire has enough air. If necessary continue pumping.
• After pumping, remove or unscrew the nozzle from the valve outlet while compressing it’s
ends by thumb. It is recomended to do this quick enough in order to not loose too much air.
• For Presta valve, tighten previously loosened additional small top.
• Screw the plastic top on the valve.
Illustration 26
Schrader valve

MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01VITEACARE.COM 17
EVERYDAY USE AND MAINTENANCE
• Clean the plastic parts and the frame with damp cloth without the addition of detergents or
other similar ones.
• Systematically remove the dirt from the movable elements of the stroller (screws,
resistance mechanisms).
• Regularly remove dirt from the upholstery with a damp cloth.
• Keep clean all strollers elements for to save functional parameters of the product.
• Storing in rooms of very high humidity (baths, laundries etc.) or in the open air, in the
combination with the lack of hygiene will cause the fast loss of functional and aesthetic
parameters.
• Do not expose the wheelchair on to extreme weather conditions (rain, snow very strong
sun), because certain parts can change color.
You must not use:
• solvents,
• toilet detergents,
• sharp brushes and hard objects,
• detergents that contain chlorine,
• corrosive detergents,
• pressure or steam aggregates.
Frequency Object of control Comments
Before rst installation
Checking the technical condition
and all the elements within the
packaging.
Check if any elements have any
visible mechanical damage.
Before each use Control of wheels, brakes, the lock
of driving direction
The brakes can wear out, check
the condition of the brakes and
the lock of driving direction before
each use You should also check
the condition of wheels and clean
them from dust and sand.
Every two weeks Screw and nut control regarding
their correct xing.
Make sure if all the screws and top
are xed tightly.
Every two months Cleanliness and general condition. In case of mechanical damage
contact the producer immediately.
Once a month Wheel axles
Wheel axles must be conserved,
oil between the axle and the hub a
few drops of lubricant.
Repair
• In case of reparation, please
contact the producer.
Customer service
• If you have any questions or
need help, contact the producer.

18 VITEACARE.COM
MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01
8. TECHNICAL PARAMETERS
Permitted user weight 75 kg
Stroller height 1260 mm
Backrest width 380 mm
Stroller width 600 mm
Stroller length 1420 mm
Front seat height 550 mm
Seat depth 460 mm
Seat width 390 mm
Backrest length 750 mm
Stroller weight 25 kg +/- 5%
Front wheels diameter 240 mm
Rear wheels diameter 240 mm
Type of wheels Full
Materials Aluminum and steel frame
Maximum safe slope
Description of the environment in which the
product will be used
Temperature of storage and use
The humidity for the storage and use From 30% to 70%
Given on the product

MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01VITEACARE.COM 19
9. SYMBOLS
Conrmation of product compliance with EU standards
Production date
Manufacturer
See the instructions for use
WARNING
Catalogue number
Serial number
Protect from moisture
Protect from sunlight
Permissible user weight
Indoor and outdoor use

20 VITEACARE.COM
MODEL: PROMYK
LANGUAGE: ENGLISH VERSION: 2022-01
Possibility of ngers jamming
Temperature of storage and use
Maximum safe slope
The product is intended to transport by car
The product is not designed for use as a seat to
transport in a motor vehicle
Do not stand on the footrest
10. CONTACT DETAILS
mdh Co., Ltd.
St. 104 Maratońska, 94-007 Łódź, Poland
tel. [phone], fax. [phone]
www.mdh.pl, www.viteacare.com
Medical device