Vitea Care Junior Plus User manual

Instrukcja używania
Instructions for use
Junior Plus
CHILDREN REHABILITATIVE
STROLLER
Junior Plus
WÓZEK INWALIDZKI
SPECJALNY DZIECIĘCY
232
Nr kat. / Cat. No. DRVG0J
Wydanie/Edition EJ 01.2022

Instructions for use
TABLE OF CONTENT
1. Introduction 3
2. Product description 3
3. Indications 6
4. Contradictions 6
5. Usage 6
6. Safety of use 12
7. Everyday use and maintenance 14
8. Technical parameters 28
9. Symbols 29
10. Contact details 30
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01
2 VITEACARE.COM
ATTENTION
Always follow the basic precautions according to the information included
below and regarding safety measures when using the device. Read the entire
instructions carefully before use. Keep this user’s manual for future reference.
Junior Plus children’s rehabilitative stroller is available in two sizes,
further known as Junior Plus 2, Junior Plus 3. For detailed
information please refer to the Technical Parameters section.

MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01 VITEACARE.COM 3
1. INTRODUCTION
Thank you for choosing our product. We are deeply convinced that it will meet
your expectations. Please read this document before first use. This manual
was made in order to provide the necessary information on the safe use of
the device. The correct application of the recommendations will contribute
significantly to extended durability and visual design of the product. We would
like to highlight that to davte we are constantly improving the quality of our
products, which may result in minor changes that are not included in this
manual.
2. PRODUCT DESCRIPTION
Fig. 1. Construction scheme of Junior Plus children’s rehabilitative stroller.
1. Handle, 2. Lever for changing the seat angle and backrest, 3. Trunk
stabilizer, 4. Side stabilizer, 5. Side frame, 6. Rear wheel, 7. Basket for small
items, 8. Canopy, 9. Head stabilizer, 10. Safety belts, 11. Front guard, 12. Front
wheel handle, 13. Footrest, 14. Front wheel.

4 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01
EQUIPMENT OF THE STROLLER’S PACKAGE
Fig 2. Stroller corpus
Fig 3. Seat
Fig 4. Wheels
Front wheel
Front wheel stem
Rear wheel
Side frame connector

MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01 VITEACARE.COM 5
Fig 5. Front guard Fig 6. Canopy
Fig 7. Basket for small items, umbrella (additional option), table and try holder, lumbar support,
attachable cup holder
Fig 8. Sleeping bag Fig 9. Raincover

6 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01
3. INDICATIONS
The stroller is designed for children with disabilities and / or dysfunctions movement
activities as a result of damage of the CNS Central Nervous System. It can be used in
children with CP Cerebral Palsy, myelomeningocele, muscle disorders, dysfunctions of
the lower limbs.
The maximum weights are 40 kg (Junior Plus 2) & 75 kg (Junior Plus 3).
4. CONTRAINDICATIONS
Contradictions against sitting position.
5. USAGE
• After unpacking the package, check if it contains all parts in accordance with the list of
elements set out above.
• Ensure that all components have no visible damage. If any doubts, please contact the
manufacturer.
• Do not use the stroller until all parts are properly connected.

MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01 VITEACARE.COM 7
UNFOLDING THE STROLLER
Fig 10. Folded stroller Fig 11. Unfolded stroller
Caregiver handle Lever for changing angle of
seat and backrest
Lever for
corpus
folding
Front wheel
handle
• Unfolding the stroller should begin with the setting of the corpus on a flat surface,
preferably on the floor. Handle to drive should be facing up (Fig. 10).
WARNING: In Junior Plus 3 start first with unfolding footrests.
• Stroller corpus should be lifted up using the handle until (Fig. 11.) you will hear
a click.
• To fold a stroller corpus, at the same time pull upwards the two levers folding. At this
moment lock is released and side frame connector is separated.
• Then direct down the driving handle till the stroller corpus get figure like on Fig. 10.
• Make sure that the actuators are unlocked when folding and unfolding the stroller.
To do this, press the seat and backrest
WARNING! When folding the stroller, the rear wheels must be
unlocked!

8 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01
Seat lock
Fig 12. Folded stroller Fig 13. Seat lock closeup
• Into unfolded stroller corpus, attach wheels.
• Front wheel stem slip in the wheel grip in the direction from the bottom to the top, to
the point hearable click.
• To remove the front wheels, press button located at the top of wheel handle and pull it
in from top to bottom (Fig. 12.).
• Rear wheels slide on the pin located in the back of the stroller corpus. Press in this
same time the button located in the central part of the wheel to hearable click.
• To remove the rear wheels, press the button in the middle of the wheel and then pull
the wheel out of the stroller corpus (Fig. 13.).
• Basket for small items should be mounted on the front of the stroller to a thin rod in
the lower part of the side frames using latch, while at the rear of the horizontal rod using
Velcro (Fig 13.).

MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01 VITEACARE.COM 9
Rod Seat socket
• Seat is equipped with four pins, two on each side.
• While installing the seat, pins should be positioned in the seat socket (Fig. 15.).
• The seat should be held with both hands, one hand front edge of the seat and second
hand the upper edge of the backrest.
• After placing the seat in the stroller corpus, it will lock automatically.
• To remove the seat from the corpus, the safety devices must be unlocked at the same
time. The safety catch (1) needs to be moved down, and the second safety catch (2)
towards the first safety catch (Fig. 16.). There will be a characteristic click. Do this on
both sides. Carefully pull out the seat.
Fig 14. Seat with rod Fig 15. Seat sockets
Fig 16. Safety catches
12

10 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01
• To install the canopy push canopy handles on the stroller support frame (Fig. 17, 18.).
• Sleeping bag mount if only the child is properly fasted with the seatbelt (Fig. 19).
• To mount the sleeping bag, start from the bottom by hooking it on the footrest.
• Front guard must be attached to the seat frame with clips, make sure that the barrier is
properly fastened (Fig. 18.).
Canopy lock
Fig 18. Canopy folded
Fig 17. Canopy attachment
Fig 19. Canopy unfolded,
sleeping bag

MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01 VITEACARE.COM 11
• Raincover should be placed from top to bottom. Cover canopy and then stretch down to
a footrest (Fig. 20.).
• When the raincover is no longer needed, dry it, out of the reach of children.
Fig 20. Raincover properly attached to the stroller
FOLDING THE STROLLER
• To fold the stroller, remove the canopy and front guard.
• Open seat lock, remove seat.
• Unlock the rear wheels (you can also remove the front and rear wheels).
• Pull levers folding corpus.
• Fold corpus.
WARNING! Failure to follow these guidelines can result
in damage to the wheelchair.

12 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01
6. SAFETY OF USE
a) Before using the stroller, refer to this manual and keep it for future reference.
b) Your child’s safety may be compromised case of non-compliance of rules contained in
this manual.
c) Never leave a child unattended. Always watch the child when he/she is in the stroller.
Caretakers are responsible for the safety of the child.
d) The seat is not suitable for children under 6 months.
e) Always use the seat belts to avoid serious injuries caused by the child falling out or
slipping out of the stroller.
f) It is important to fasten seat belt properly and its adjustment to the user.
g) The seat and belts do not replace proper supervision of caretaker.
h) While adjusting the parameters of the stroller, the child should not be in a stroller.
i) All repairs must be carried out by qualified personnel. And during the warranty period only
by the manufacturer’s service.
j) The stroller is not suitable for running or ice-skating and roller skating.
k) The stroller is designed for transporting only one child.
l) It is unacceptable to use the stroller, if you found visible or palpable damage, or worn out
parts and stroller parts indicates a potential risk of an accident (e.g. Consumption wheels,
upholstery, cracks, etc.).
m) Always check before use if the stroller is properly unfolded. Ensure that all locks blocked
before use.
n) To avoid injury to make sure that the child is far away when the product is being folded
and unfolded.
o) When moving the stroller through doors and other passages, make sure that on both
sides there is enough space to avoid injury of hands or damage the stroller.
p) Do not allow your child to play with this product.
q) Do not allow your child to stand on the stroller or footrest. The stroller might fall over and
hurt the child.
r) When in motion, always hold the handle of the stroller.
s) Be especially careful while using the wheelchair near to steps and stairs.
t) The stroller is not intended for use on stairs and escalators.
u) Do not to move the stroller if a child is sitting in it.
v) Do not to move the stroller by holding the front guard. If there is a need to move your
stroller, you should hold the fixed elements of the frame.
w) In order to avoid accidental rolling off the stroller, always put on the brakes and turn
on the lock of driving direction when the stroller is stopped, when patient get in, get off,
changing the position.

MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01 VITEACARE.COM 13
x) Do not let the child stand on the footrest. Never leave the stroller unattended on sloping
ground, even if the brakes are on.
y) The stroller is designed for children up to 40 kg (Junior Plus 2) and 75 kg (Junior Plus 3).
z) Stroller should always be easy to fold out. In case of problems with unfolding. You should
re-read the user’s manual or contact the manufacturer.
aa) Keep extreme caution while passing an obstacle. Extreme use of the stroller could
cause damage or destroy it.
bb) Never use the stroller as a seat for the transportation of people in cars, buses, or any
motor vehicles.
cc) During transport (e.g. In the trunk), do not burden stroller, it may weaken or damage its
structure.
dd) Do not leave the stroller with the user close to open sources of fire
ee) Be aware that the surface temperature of the upholstery and the frame parts may
be increased after exposure to the sun or other heat source. Furthermore, with low
temperatures there is a danger of overcooling metal parts of stroller. It may cause burns or
frostbite parts of the body.
ff) Keep caution while moving on sloping surfaces. The maximum allowable slope angle up
and down is 5%.
gg) With the stroller you can only use on surfaces where all four wheels touching the ground
are to use all of four wheels.
hh) Stroller is designed for use indoors and outdoors only on paved and even surfaces.
ii) Use of the product i.e. The icy, wet, greasy, strongly gritty surfaces is unacceptable - it
creates a risk of falling.
jj) It is extremely important to keep all strollers’ components clean in order to maintain the
product parameters.
kk) Do not add additional loads (bags, etc.) on the stroller handles.
ll) Storing the stroller in areas with very high humidity (baths, laundry, etc.) or in the open
air, also the lack of hygiene causes rapid loss of operating parameters and aesthetic of the
product.
mm) Do not leave the child in the stroller for longer, because persons with neurological
affections who stay in unchanged positions may experience problems with skin nourishment
and develop bedsores.
nn) When the footrests will not be removed before folding the stroller, it can cause damage.
oo) During use, handing of the product and during its assembly, regulating mechanisms,
it might happen trapping and / or squeeze user’s or caretaker’s body part in holes / gaps
between the elements.
pp) Perform these steps with extreme caution. After adjustment, stabilize the position by
carefully tightening the nuts / bolts.

14 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01
7. EVERYDAY USE AND MAINTENANCE
TWISTING MOTION LOCK - DRIVING ONLY IN STRAIGHT
• The front wheels are equipped with twisting motion lock (Fig. 21.).
• To turn it on, turn the lock to the right on both front wheels.
• Then set the wheels in the straight-ahead, it will block the twisting motion.
• Make sure that the lock is working properly.
• To turn off the twisting motion lock, spin the lock on both wheels to the left.
Fig 21. Motion mechanism
Twisting motion lock - turn off
Twisting motion lock - turn on

MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01 VITEACARE.COM 15
SWITCHING THE BRAKE
• The rear wheels are equipped with brake system.
• To prevent unplanned movement of the stroller, switch on brakes on two rear wheels
(Fig. 22.).
Brake lever
Footer
Fig 22. Brake mechanism
• To prevent movement, press the foot brake lever.
• It is necessary to make sure that the brake lever has been launched on both wheels.
• To unlock the brake, lift the brake lever.

16 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3 LANGUAGE:
ENGLISH VERSION: 2022-01
FOOTREST LENGTH REGULATION
• The footrest has a five-stage (or seven stage) length adjustment.
• To change the length of the footrest, remove two footrest locks on both sides of the
footrest (Fig. 23.)
• Select required length on the footrest, by using the holes in footrest frame.
• Next insert the footrest locks into the holes.
• It is important that each side footrest locks were placed in holes at the same height.
Fig 23. Footrest regulation scheme Footrest locks closeup
• Select required length on the footrest, by using the holes in footrest frame.
• Next insert the footrest locks into the holes.
• It is important that each side footrest locks were placed in holes at the same height.

Footrest locks closeup
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01 VITEACARE.COM 17
FOOTREST POSITION ADJUSTMENT
• By pressing by both sides of the footrest adjustment button, you can change its position up
or down (Fig. 24.).
• It is important that the regulation buttons are pressed by thumbs, while the rest of the
hand, grasps the footrest frame.
Regulation button
Fig 23. Footrest regulation scheme
Footrest frame
SEAT DEPTH ADJUSTMENT
• Six knobs are located under the seat.
• Their use has been shown on figure 25.
• To adjust the seat depth, loosen the two knobs the seat depth adjustable.
• Grab the seat edge by hand, push or pull to set the desired depth.
• Then tighten the two knobs to adjust the seat depth to prevent automatic changes the
depth of the seat. Seat depth
adjustable knobs
Side stabilizers
with adjustable
knobs
Side stabilizers with adjustable knobs
Fig 24. Seat depth adjustment

18 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01
• After unzipping in the rear of the backrest is visible eight knobs. Their use has been shown
in figure 26.
• To change the position of the side stabilizers, should loosen the right pair and left pair of
side stabilizers adjustable knob.
• Grasp side stabilizer on the left and then on the right, by using hand, set the desired
position of the stabilizers.
•Tighten both knobs which were loose before.
Fig 26. Motion mechanism
Head stabilizing adjustable knobs
Backrest height adjustable lever
SIDE STABILIZERS POSITION ADJUSTMENT
TRUNK STABILIZERS POSITION ADJUSTMENT
• After unzipping in the rear of the backrest is visible eight knobs. Their use has been shown
in figure 26.
• To change the position of the trunk stabilizers, should loosen the right pair and left pair of
trunk stabilizers adjustable knob.
• Grasp trunk stabilizer on left and then on right by using hand, set the desired position of
the stabilizers.
• Tighten both knobs which were loose before
Backrest height adjustable knobs
Trunk height adjustable knobs

Backrest height adjustable lever
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01 VITEACARE.COM 19
BACKREST HEIGHT ADJUSTMENT
• To change the backrest height, should loosen pair of backrest high adjustable knob
(Fig. 26.).
• Grasp upper edge of the backrest by using hand, set the desired position.
• Tighten a pair of knobs which were loose before.
Armrest height adjustable knob
Fig 27. Armrest adjustment
• To change the height of the armrest, unscrew both knobs located under the armrest, then
select the height and tighten the knobs (Fig 27.).
Trunk height adjustable knobs
HEIGHT ARMREST ADJUSTMENT
ADJUSTING THE BACKREST ANGLE
• To change the angle of the backrest, push by thumb on the upper edge of the backrest.
Grab lever adjusting the angle of the backrest from the bottom. Pull the lever and set
convenient location in one of four positions.

20 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01
Fig 28. 5-point safety belts
5-point central lock
Shoulder belts
SAFETY BELT SYSTEM
Central belt
Belt regulation
elements