Vitek VTD-HOC4F User manual

VITEK
FEATURES:
• 1/2.9” Sony CMOS
• 2.0 MegaPixel With full 1080p/720p HD-SDI Output (SMPTE 292M)
• 3.7mm Fixed Iris lens Included
• Mechanical IR Cut Filter (True Day/Night)
• 16:9 Video format
• Advanced OSD Functions: WDR, 3D-DNR, Night Watch DSS Low Light
Color Technology, ACE (Adaptive Color Enhancement), Motion Detection,
Privacy, Digital Zoom, HLM, Flip, Mirror
• 100% Pure Digital Transmission of video data
• Up to 700’ HD Transmission Range (Depending on cable characteristics
and integrity)
• 12VDC Operation
• Available in Ivory or Black
VTD-HOC4F/I
2.0MP HD-SDI Indoor WDR
Dome Cameras

1. Depress the joystick to enter the setup menu
•The Setup menu is now displayed on the monitor
OSD controls are located inside the camera.
2

1. Depress the joystick to enter the setup menu
•The Setup menu is now displayed on the monitor
OSD controls are located inside the camera.
3

Select any function you
wish to change by
pushing the joystick Up
or Down
Modes can be changed
by pushing the joystick
Left or Right.
3. When finished programing camera select EXIT to save values.
MENU
MENU
•
When the SETUP menu screen is displayed, select EXPOSURE by pushing the joystick up or
down so that EXPOSURE is highlighted.
•
When the SETUP menu screen is displayed, select EXPOSURE by pushing the joystick up or
down so that EXPOSURE is highlighted.
the type of the lens can be set to either DC or Manual.
(PAL / NTSC)
Decrease Level Increase Level
4

•
When the SETUP menu screen is displayed, select EXPOSURE by pushing the joystick up or
down so that EXPOSURE is highlighted.
•
When the SETUP menu screen is displayed, select EXPOSURE by pushing the joystick up or
down so that EXPOSURE is highlighted.
the type of the lens can be set to either DC or Manual.
(PAL / NTSC)
Decrease Level Increase Level
5

by using the joystick up or down
so that the arrow indicates White Bal.
joystick.
When Halogen or other specialty lighting is used.
Increase or Decrease Level.
Increase or Decrease Level.
Increase or Decrease Level.
Set from 0-10 (set to high and color will fade)
Turns Mirror / Flip On or Off.
Adjustable digital zoom from 0~127x.
32
MENU
6

Set from 0-10 (set to high and color will fade)
Turns Mirror / Flip On or Off.
Adjustable digital zoom from 0~127x.
32
MENU
7

to prevent bright lights from washing out the picture i.e.
headlights
Increase or decrease the level of HLM
8

The Wide Dynamic Range feature improves the overall picture balance beyond the
Backlight Compensation feature. It creates an optimal balance of brightness and color by
combining images from a bright area (high shutter speed) and images from a dark area
(low shutter speed).
9

MENU
MENU
•Reduces noise level in low light conditions.
MIDDLE
MENU
MENU
10

MENU
MENU
11

Set output frame to 25 or 30 (PAL/NTSC). (Can be set to 50 or 60 at 720P mode)
MENU
To help Compensate for dead pixels
12

(In this mode the OSD might flicker)
Adjust the focus while in zoom mode to better focus the camera
Factory Default
13

DIMENSIONS
INSTALLATION
4.61”
3.07”
1.40”
4.61”
3.74”
HDMI
HD-SDI DVR
14

SPECIFICATIONS
Sensor
Resolution
S/N
Video Output
Lens
Minimum Illumination
Day/Night
Electronic shutter speed
White Balance
Brightness
DSS (Sens-Up)
DNR
WDR
OSD Language
Digital Zoom
Privacy
Motion Detection
ACE (Adaptive Color Enhancement)
Advanced OSD Functions
Communication
HD Transmission Range
Operating Conditions
Input Voltage
Dimensions
1/2.9” Sony CMOS
2.0 MegaPixel (1080p / 720p)
More than 52 dB (AGC Off)
1x HD-SDI (BNC) / 1x SD CVBS (BNC)
3.7mm Fixed
1 Lux at F1.2 / 0.1 Lux (B/W)
Mechanical IR Cut Filter (True Day/Night)
Auto / Manual (1/30sec ~ 1/30,000sec)
Auto / Auto EXT / Pushing / Manual
Adjustable (0 ~ 20 Steps)
YES
3D-DNR
YES
English
0 ~ x127
YES (32 Zones)
YES
YES
HLM, Flip, Freeze, Sharpness, Mirror
RS-485 (PELCO-D)
Up to 700’ (Depending on cable characteristics and integrity)
14°-122°F (-10°-50°C) < 80% RH
12VDC
4.6” x 3.07” (Dia. x H)
15

LIMITED LIABILITY WARRANTY
VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that
products manufactured by VITEK are free of any rightful claim of infringement or the like, and
when used in the manner intended, will be free of defects in materials and workmanship for
a period of three (3) years, or as otherwise stated above, from the date of purchase by the
end user. This warranty is nontransferable and extends only to the original buyer or end user
customer of a VITEK Authorized Reseller.
The product must have been used only for its intended purpose, and not been subjected to
damage by misuse, willful or accidental damage, caused by excessive voltage or lightning.
The product must not have been tampered with in any way or the guarantee will be
considered null and void.
This guarantee does not affect your statutory rights.
Contact your local VITEK Reseller should servicing become necessary.
VITEK makes no warranty or guarantee whatsoever with respect to products sold or
purchased through unauthorized sales channels. Warranty support is available only if product
is purchased through a VITEK Authorized Reseller.
28492 CONSTELLATION ROAD VALENCIA, CA 91355
WWW.VITEKCCTV.COM Version 1.2 (3700-8537A)
July 2013