Vitesy Eteria User manual
User Guide
Table of content vitesy.com
EN
Thank you
Setup guide
IT
Grazie
Guid all’installazione
DE
Danke
Installationsanleitung
ES
Gracias
Guí de instalación
FR
Merci
Guide d’installation
1
2
4
15
16
18
29
30
32
43
44
46
57
58
60
User Guide
1
User Guide
Thank you.
3
Thank you! edenprojects.org
We would like to personally thank you for
choosing our products. We are truly grateful
for your support!
Thanks to Eden Reforestation Projects, with
your purchase you have planted 10
mangroves in Madagascar.
We have been fighting against deforestation
and air pollution since 2016, and there are now
hundreds of thousand new trees in the world!
Together we can make a dierence, even with
our smallest gestures.
Enjoy your Eteria!
Thank you so much,
Team Vitesy
Welcome,
your Vitesy experience
starts here. Enjoy the
purification and diffused
monitoring of Eteria.
Map your home and start to
breathe clean air.
vitesy.com
Let’s begin
5
What’s in the box
Depending on what you purchased, you will find one or
more of the following components in the package.
Otherwise, contact us at support@vitesy.com.
Power supply
Air quality
module
Air
purifier
X1
X1
6
The air quality module is the heart of the Eteri system. Thanks
to advanced sensors you can monitor the basic parameters of
the air you breathe. We recommend placing at least one air
quality module per room.
1 → Air quality module
USB-C → For the power
supply.
Cover → Removable for
connecting extr modules.
Connector → Magnetic
coupling to the purifier.
Interface → It lights up
blinking with dierent
colors to indicate the
quality of the air.
Sensors → Temperature (T),
humidity (HR), volatile
organic compounds (TVOC),
carbon dioxide (CO).
7
Purified
air
2 → Air purifier
Polluted
air
The air purifier is the active part of the Eteri system. Thanks to
two innovative filtering stages (pre-filter and photocatalytic filter)
you can breathe clean air wherever and whenever you want.
Pre-filter → Warp-knit 3D mesh fabric
Photocatalytic filter → Ceramic filter treated
with WO3 (tungsten trioxide).
Purified
air
Polluted
air
8
3 → Turn it on
The air quality module is powered by the supplied USB-C cable
just plug it into the electricity. The air purifier only works when
connected to the air quality module .
Tip → To attach and
detach the purifier, hold
the monitoring module
firmly with your hand.
9
4 → Positioning
The Eteri system can be placed inside any room. Don’t place it
on the floor, near heat sources, and in environments with high
humidity. We recommend placing it at least 30 cm/11.8 in from
the wall. Don’t obstruct the inlet and outlet are of the
purifier. For accurate data, once positioned, don’t move or turn
o the air quality module.
30 cm
11.8 in
10
5 → Map your home
The Eteri system is designed to oer you an air purification and
monitoring experience spread throughout your home or oce.
Place at least one air quality module in each room. In this way
you can check the air quality in each of your rooms vi the app.
The purifier can be moved to the various air quality modules.
Children's
bedroom
Bedroom
Oce
Kitchen
Living
room
11
6 → Move the air purifier
The air purifier is activated thanks to the air quality module. If
you have more than one air quality module in your space, move
the air purifier on the air quality module that reports bad air
quality, in this way you can purify the air where it is necessary.
Living room
Kitchen
12
7 → Pre-filter maintenance
Remove the pre-filter from the top, remove dust by
vacuuming and/or using brush to remove hair, dust, and large
particles. N.B. If the dust isn’t excessive, you can do this even
without removing the pre-filter. Wash the pre-filter under
running water to remove any dust residues that cannot be
removed with suction. Machine wash at 60 °C once every
two months, or depending on the amount of dirt accumulated
on the pre-filter. After washing, let it dry. When it’s totally dry,
replace the pre-filter.
Tip → To remove the prefilter with
ease, use the tab .
60°
13
8 → Ceramic filter maintenance
Remove the filter without touching the ceramic part,
remove the dust with vacuum cleaner or by using an air jet.
Dust decreases the photocatalytic eciency.
Wash the filter under running water every two months to
remove any residual dust accumulated in the pores. DO NOT
use tools to scratch the surface of the filter. If the dirt is
stubborn, immerse the filter in room T ° water for 10-15 min.
After washing, gently shake the filter to remove excess water
and let it dry on cloth. DO NOT rub. DO NOT dab. When it is
totally dry, enter the filter.
Tip → We suggest not to handle
the filter with bare hands. It could
get dirty and lower the eciency
of the photocatalytic reaction.
Download the Vitesy Hub
App on the the App Store o
Play Store. Connect Eteria to
your smartphone and follow
the instructions to explore all
the incredible features of
your personal air purifier,
and control the air you
Connect Eteria
15
Guida utente
Scopri
Eteria
Grazie.
17
Grazie! edenprojects.org
Ci teniamo a ringraziarti personalmente per
aver scelto i nostri prodotti. Siamo
profondamente grati del tuo supporto!
Grazie ad Eden Reforestation Projects, con il
tuo acquisto hai piantato 10 mangrovie in
Madagascar.
Combattiamo la deforestazione e
l’inquinamento dell’aria dal 2016, e adesso ci
sono centinaia di migliaia di nuovi alberi nel
mondo!
Insieme possiamo fare la dierenza, anche con
i gesti più piccoli.
Goditi il tuo Eteria!
Grazie di cuore,
Team Vitesy
Table of contents
Languages:
Other Vitesy Air Cleaner manuals
