Vivo CART-LAPC1 User manual

Black Laptop Charging Cart with Keypad Lock
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/cart-lapc1
SKU: CART-LAPC1
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF CART.
• USE TIPOVER RESTRAINT OR ANCHOR CART TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
250lbs
(113kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
A (x1)
Top Panel
B (x1)
Le Side Panel
C (x1)
Right Side Panel
D (x1)
Bottom Panel
E (x3)
Shelf
F (x2)
Bale
G (x1 )
Front Door
H (x1)
Back Door
S-A (x12)
ST4x10mm Screw
S-B (x40)
M6x12mm Screw
S-C (x16)
M4x10mm Screw
S-D (x16)
M8x16mm Screw
S-E (x2)
M8x40mm Screw
I (x1)
Handle
TOOLS NEEDED
Phillips
Screwdriver
6mm Allen
Wrench
J (x4)
Power Strip
K (x2)
Cable Storage
Hook
L (x2 )
Caster
N (x8)
Power Strip
Bracket
O (x8)
Corner
Bracket
P (x2)
Rubber Mat
Q (x28)
Laptop Divider
M (x2)
Locking
Caster
R (x30)
Cable Managment
Clip
S-F (x16)
M8 Washer
S-G (x16)
M8 Lock Washer
S-H (x2)
Black M8 Washer
S-I (x56)
M5 Nut
S-J (x8)
Rubber Mat Clip
NOTE: Extras of some hardware included.
8mm Socket
Wrench

3
ASSEMBLY STEPS
STEP 1
Place Top Panel (A) upside down and assemble Le Side Panel (B) and Right Side Panel (C) by inserting
the tabs into the slots on the underside of Top Panel (A), then slide them back to secure them in place.
STEP 2
Front
Front
A
B
C
Install Corner Brackets (O) to Le Side Panel (B), Right Side Panel (C), and Top Panel (A) using M6x12mm
Screws (S-B) and a Phillips screwdriver.
B
C
A
O
S-B

4
STEP 3
Assemble Shelves (E) and Bales (F) to Le Side Panel (B) and Right Side Panel (C) using M6x12mm
Screws (S-B) and a Phillips screwdriver.
STEP 5
Assemble Bottom Panel (D) to Le Side Panel (B) and Right Side Panel (C) by inserting the tabs in side
panels into the slots on the top of Bottom Panel (D), then slide it forward to secure it in place.
STEP 4
Slide Power Strip Brackets (N) into the top and bottom of Power Strips (J). Mount Power Strip Brackets
(N) to Le Side Panel (B) and Right Side Panel (C) using M4x10mm Screws (S-C) and a Phillips
screwdriver.
Back
Back
Back
E
F
BC
S-B
N
J
B
C
S-C
Front
D
B
C

5
STEP 6
Secure Casters (L) and Locking Casters (M) to Bottom Panel (D) using M8x16mm Screws (S-D) with M8
Lock Washers (S-G) and M8 Washers (S-F). Tighten with a Phillips screwdriver.
STEP 7
Install Corner Brackets (O) to Le Side Panel (B), Right Side Panel (C), and Bottom Panel (D) using
M6x12mm Screws (S-B) and a Phillips screwdriver.
LM
DS-D
S-G
S-F
B
C
D
O
S-B

6
STEP 9
Insert Cable Management Clips (R) into the underside of top and middle Shelves (E).
STEP 8
Secure Rubber Mats (P) to middle and bottom Shelves (E) using Rubber Mat Clips (S-J). Thread M5 Nuts
(S-I) onto Laptop Dividers (Q). Secure Laptop Dividers (Q) into bottom Shelves (E) and Bales (F) using
an 8mm socket wrench.
F
P
E
S-J
S-I
Q
R
E
Front

7
STEP 10
Slide the plastic covers o of Handle (I) and secure to either Right Side Panel (C) or Le Side Panel (B)
using M8x40mm Screws (S-E) with Black M8 Washers (S-H) and a 6mm Allen Wrench. Assemble Cable
Storage Hooks (K) to Le Side Panel (B) and Right Side Panel (C) using M6x12mm Screws (S-B) and a
Phillips screwdriver.
STEP 11
Install Front Door (G) and Back Door (H) to the assembly using ST4x10mm Screws (S-A) and a Phillips
screwdriver.
I
C
S-E
S-H
K
B
S-B
Front
G
H
S-A

LAST UPDATED: 09/13/2022
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303