Vivo CANDY-DSPY3 User manual

3 Tray Acrylic Display Case
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/candy-dspy3
SKU: CANDY-DSPY3
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about
the safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not
exceed weight capacity. We cannot be liable for damage or injury caused by
improper mounting, incorrect assembly or inappropriate use.
WARNING: IMPORTANT SAFETY INFORMATION
READ AND FOLLOW ALL SAFETY REQUIREMENTS
KEEP THIS MANUAL IN A SAFE AND DRY PLACE FOR FUTURE REFERENCE
Phillips
Screwdriver
PACKAGE CONTENTS
TOOLS NEEDED
Adjustable
Wrench
A (x4)
Screw
B(x2)
Handle
C(x16)
Bolt
D (x16)
Spring Washer
E (x16)
Locking Nut
AA (x2)
Side Section
BB (x2)
Short Bent Section
(Top)
CC (x1)
Long Bent Section
(Bottom)
DD (x1)
Flat Section
EE (x3)
Tray
8.8lbs
(4kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS.
ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
Find the pre-drilled holes on each of the hinged side sections (AA) and line up the
plastic handles (B) with the holes. Screw each of the plastic handles (B) onto the
outside of each section.
STEP 2
Place the two hinged side sections (AA) upside down so the interior grooves face
each other and the case's shorter side is on the bottom. Place the bottom section
(BB) on top of the two side pieces. The bent side will be at the front of the case and
the magnet will be at the back of the case. Align the pre-drilled holes and insert a
bolt (C) into the pre-drilled hole and then slide a spring washer (D) onto the bolt
and secure with a locking nut (E). Gently tighten with an adjustable wrench until
the nut is snug. Do not over tighten. Continue until all six bolts (C) are secure. At this
time, the magnet on the bottom section (BB) will align with the metal door catches
on each of the doors.
STEP 3
Flip the display case over and align top section (CC) with the pre-drilled holes. The
bent side of this piece will be at the front of the case. Insert each bolt (C) into the
pre-drilled hole and then slide a spring washer (D) onto the bolt (C) and secure with
a locking nut (E). Gently tighten with an adjustable wrench until the nut is snug. Do
not over tighten. Continue until all six bolts (C) are secure.
STEP 4
Place flat front section (DD) on the angled front edge of the display case and insert
bolts (C) into the pre-drilled holes, place spring washers (D) onto the bolt (C), and
secure with a locking nut (E).
STEP 5
Aer the case is assembled, check that all parts are correctly aligned and that the
locking nuts (E) are secure. Slide each of the Choice trays (EE) into the grooves
inside the display case.

LAST UPDATED: 03/04/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303