Vivo Sonos Play 5 User manual

Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-play5w-1
SKU: MOUNT-PLAY5W-1
White Wall Mount Designed for Sonos Play 5
Instruction Manual
[email protected]om www.vivo-us.com 309-278-5303

2
PACKAGE CONTENTS
WARNING!
A (x1)
Large Support
Bracket
B(x1)
Small Support
Bracket
W-A (x5)
Screw
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
W-B (x5)
Anchor
C (x1)
Wall Mount
D(x1)
Bolt
E(x1)
Allen Wrench
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
TOOLS NEEDED
Phillips
Screwdriver
Drill
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [email protected], or call us at 309-278-5303.

3
ASSEMBLY STEPS
STEP 1
Using the wall mount (C) as a template, mark drilling locations
on wall with a pencil. Use of a level is recommended.
2
1
XX
√
C
4-5mm
ø 8mm
(
ø
5
/16")
W-B
W-A
W-A
W-B
OPTION B: Concrete/Brick Wall Installation
For concrete/brick installation, drill 2.2”
(55mm) deep holes using a 5/16” (8mm)
drill bit. Inset screw (W-A) into top hole (use
anchor (W-B) only with concrete/brick),
leaving 4 to 5mm of thread exposed. Hang
wall mount (C) over screw. Secure wall
mount (C) using screws (W-A). (Use anchors
(W-B) only with concrete/brick).
OPTION A: Wood Wall Installation
For wood stud installation, drill 2” (50mm)
deep holes using a 5/16” (8mm) drill bit.
Inset screw (W-A) into top hole, leaving 4 to
5mm of thread exposed. Hang wall mount
(C) over screw. Secure wall mount (C) using
screws (W-A).
STEP 2
Route cable through large support bracket (A).
Place Sonos PLAY 5 speaker onto large support
bracket (A), and secure using small support bracket
(B) and bolt (D).
3
3
D
1
A
B
A
C
2
STEP 3
Slide large support bracket (A) with speaker
onto wall mount (C).
STEP 4
Adjust tilt using Allen wrench (E).
±30°
0°
-15°
E

LAST UPDATED: 10/14/2019
Open Monday-Friday from 7:00am-7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]
www.vivo-us.com
309-278-5303
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
AVG. RESOLUTION TIME (within oice hrs): < 15 M