Vivo STAND-V003P V003P User manual

  
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-  
 
phillips screwdriver
 
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
 (x1)
 (x1)
 (x6)  (x1)
(x1)
3mm
! (x1)
5mm
" (x5)
6mm
-  (x12)
D5
-  (x12)
M4x12
 (x1)
# (x1)
-  $ (x12)
M4x16
- -%&&'' ()&& '
$ (x1)

)*+ 
 ,
 -
Slide cable management clip (F) and base cover (G) on to bottom of
pole (B). Thread pole (B) onto base (A) and tighten grub screws using
3mm allen key (H).
Slide arm (C) and bracket (D) over top of pole and tighten using
mm allen key (I).
2
 
Attach cable management clips (E) as shown in diagram.

3
 .
 /
Adjust tension in monitor bracket with 6mm allen key (J) as shown in
diagram.
Store allen keys (J, I) in cable management clip (F) for future
adjustment.
 0
Attach two bolts (M-A or M-B) and washers (M-C) to top mounting
holes of monitor, making sure to leave 3mm of threads exposed.
Align bolts (M-A or M-B) in VESA plate. Secure using two more bolts
(M-A or M-B) and washers (M-C) in the bottom two holes. Tighten all
four bolts using phillips screwdriver.

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
1+ 2
  
Last updated: 04/30/18
 3
 4
Adjust height of monitors using mm allen key (I) as shown in
diagram.
WARNING: Do not move monitors behind center line. Stand can
become unbalanced and cause monitors to tip.
4