Vivo STAND-V001 User manual

Single Monitor Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v001
SKU: STAND-V001
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
PACKAGE CONTENTS
A (x1)
Pole
B(x1)
Clamp
C(x1)
Swivel Arm
M (x1)
3mm Allen
Wrench
N(x1)
5mm Allen
Wrench
L(x1)
Pole Cable
Clip
I (x1)
So Pad
J (x1)
Support Plate
K (x2)
Cable Clip
D(x1)
VESA Plate
E(x1)
Pole Cap
F (x1)
M6 Security
Nut
G(x3)
M6x16 Screw
H (x1)
Grommet
Plate
O(x1)
6mm Allen
Wrench
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
M-C (x4)
D6 Spacer
M-B (x4)
M4x30
Screw
M-A (x4)
M4x12
Thumbscrew

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
22lbs
(9.98kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
OPTION A: Desk Clamp Install
Install the Clamp (B) to the Pole (A) using M6x16 Screws (G) and tighten using 3mm Allen Wrench
(M). Mount Clamp (B) to the desktop and tighten using the plastic knob.
B
M
A
G

4
Install Grommet Plate (H) to the Pole (A) using M6x16 Screws (G) and 3mm Allen Wrench (M). Attach
So Pad (I) to the Grommet Plate (H). Position Pole (A) on the mounting surface and secure using the
Support Plate (J) and Knob (B2).
M
G
H
A
I
J
B2
Option B: Grommet Install
If desk does not have an existing grommet hole, drill a 3/8” (10mm) diameter hole at the desired
position through the mounting surface. Disassemble Clamp (B) into individual parts. Remove Clamp
Plate (B1) (You will not need this for Grommet installation) using Phillips screwdriver and remove
Knob (B2).
B2
B1
B
STEP 1 (Continued)

5
Attach Cable Clips (K) onto each segment of Swivel Arm (C).
STEP 3
Slide Pole Cable Clip (L) and Swivel Arm (C) onto Pole (A). Tighten Swivel Arm (C) at desired height
using 6mm Allen Wrench (O). Insert Pole Cap (E) into top of Pole (A).
STEP 2
K
C
C
E
L
A
O

6
OPTION B: Curved Back Monitor
Attach the VESA Plate (D) to the monitor with M4x30 Screws (M-B) and D6 Spacers (M-C).
NOTE: Gently tighten using a screwdriver
D
OPTION A: Flat Back Monitor
Attach the VESA plate (D) to the monitor with Thumbscrews (M-A).
NOTE: Hand tighten screws to avoid over tightening.
D
STEP 4

7
STEP 5
STEP 7
Tighten the screw with the supplied 5mm Allen Wrench (N) to fix the tilt angle and to make any
necessary adjustments.
Slide VESA Plate (D) with monitor onto
the head of Swivel Arm (C). Install the M6
Security Nut (F). Make sure the security
nut is installed before you rotate the
monitor.
STEP 6
Manage cables in Cable Clips (K) and Pole
Cable Clip (L).
K
L
C
F
D

LAST UPDATED: 03/26/2021
REV2.0
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303