Vivo STAND-V001U User manual

Single Monitor Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v001u
SKU: STAND-V001U
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
A (x1)
Column
B(x1)
Base
C(x1)
Clamp
J (x3)
Bolt
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D(x1)
Clamp Plate
E(x1)
Grommet Plate
F (x1)
VESA Plate
G(x1)
Cable Clip
H (x1)
Pad
I (x2)
Bolt
K (x1)
Support Plate
M-A (x4)
M4x12
M-B (x4)
M5x12
M-C (x4)
D5 Washer
L(x1)
Bolt
M (x1)
4mm Allen
Wrench
N (x1)
6mm Allen
Wrench
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
17.6lbs
(7.98kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
STEP 2
OPTION A: Grommet Installation
Mount grommet plate (E) to base using flat head bolts (J) and tighten with 4mm Allen wrench (M). Cut
rear portion o from pad (H), peel backing, and stick to installed grommet plate. Place the base over
grommet hole in desk, and secure using grommet bolt (L) and support plate (K). Tighten with 6mm
Allen wrench (N). Please note, desktop thickness must be 3/8” - 1” (10mm - 25mm).
Mount column (A) to base (B) using short bolts (I). Tighten with 6mm Allen wrench (N).
A
B
I
N
10-25mm
G
N
L
K
M
J
H
E
12
3 4

4
STEP 2 (Continued)
OPTION B: Clamp Installation
Mount clamp plate (D) to base using flat head bolts (J) and tighten with 4mm Allen wrench (M). Peel
backing from pad (H) and stick to installed clamp plate. For 5/8” - 1” (15 - 25mm) desktop thickness:
Place the base near the back edge of the desk. Position clamp (C) on base and desktop, then tighten
clamp screws with 4mm Allen wrench (M). Install cable clip (G) to column. For 3/8” - 3/4” (10 - 20mm)
desktop thickness: Remove plastic foot from clamp (C) and reinstall upside down. Place the base near
the back edge of the desk. Position clamp on base and desktop, then tighten clamp bolts with 4mm
Allen wrench (M). Install cable clip (G) to column.
M
J
1
D
H
23
H
G
15-25mm
M
C
C
1
2
G
10-20mm
M

5
STEP 3
Mount VESA plate (F) to back of monitor using screws (M-A or M-B) and washers (M-C), making sure
the slot in back is facing down.
STEP 4
Slide monitor with VESA plate onto mounting bracket on column. Tighten the screw on the side of the
bracket to secure the monitor.
M- A
M- B
M- C
F
TV
TV
TV

6
STEP 4 (Continued)
STEP 5
Loosen the knob to adjust monitor height. Manage cables and store tools using installed cable clip.
If needed, adjust the bolt on the side of the hinge behind the VESA plate to tighten or loosen the tilt
angle.
M
N

7
Adjust as Desired
+10 °
-10°
±180 °
±10 °

LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303