2 3
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED
Scissors
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
WARNING!
A (x1)
Adjustable
Desktop
B(x1)
Cable Clip
STEP 1
Carefully remove the desk (A) from the
packaging and set on a clear tabletop. Cut ties
from desktop.
STEP 2
Li the handles on both sides and raise the
desktop. Move keyboard shelf forward. Place
monitor, laptop, or other items on desktop.
33lbs
14.97kg
C(x2)
Cable Tie
STEP 3
STEP 4
Install the cable management tie (B) to the desired location.
Further organize cables using the cable ties (C).
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (19.7” / 50 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
A
C
B
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
