Vivo STAND-TDML1 User manual

Universal Laptop Stand for Treadmill
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tdml1
SKU: STAND-TDML1
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS
PACKAGE CONTENTS
TOOLS NEEDED
8.8lbs
(4kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
Telescopic
Crossbar
B(x1)
Pole
C(x1)
VESA Plate
M-A(x4)
M5x14
M-B (x4)
D5 Washer
I(x1)
M5xM6
Wrench
D (x1)
Tray
E (x4)
Pad
G (x1)
4mm Allen
Wrench
H (x1)
6mm Allen
Wrench
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
M-C (x4)
M5 Lock Nut
STEP 1
STEP 2
Assemble the VESA plate (C) to the tray (D) using M5x14 screws (M-A) with washers (M-B) and
M5 lock nuts (M-C). Use the M5xM6 wrench (I) with a Phillips screwdriver to tighten.
F (x1)
Security
Strap
WARNING THIS MOUNT IS INTENDED FOR USE WHILE WALKING.
DO NOT ATTEMPT TO RUN WHILE USING LAPTOP, AS THIS MAY LEAD
TO SERIOUS INJURY.
WARNING: CHOKING HAZARD
CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
SMALL PARTS - NOT FOR
Insert pole (B) into the support bracket on
the telescopic crossbar (A), and tighten with
the 6mm Allen wrench (H). The opening on
the top of the pole should be towards the
right side.

3
STEP 3
Slide the VESA plate with tray into the
opening on the top of the pole. Tighten
the screws with a Phillips screwdriver
to lock the parts in place.
STEP 4
STEP 5
To extend the telescopic crossbar, loosen the two bolts at each end using the 4mm Allen wrench (G).
Adjust the crossbar length to fit the treadmill’s handlebars, and then retighten the bolts.
STEP 6
Tightly fasten the mount to the treadmill’s
handlebars using the straps on each side. For
smaller diameter handlebars, the ends of the
straps may need to be fed through the slots to
be pulled for a tighter fit.
Use the security strap (F) to secure the laptop
to the tray. Adjust the mount so the laptop is in
an optimal position for use while walking.
NOTE: The laptop may swing back and forth somewhat while the treadmill is in use.
If the swinging motion seems excessive, check the straps to make sure the crossbar
is firmly mounted to the handlebars.
Stick pads (E) to the top of the tray, making sure the pads will align with the laptop computer. To slide
the tray to the side of the crossbar, loosen the center bolt on the support bracket as shown using the
4mm Allen wrench (G). Retighten the bolt when the tray is in the desired position. Insert the security
strap (F) into the slots in the tray as shown.

LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303