Vivo STAND-V004Z User manual

Quad Monitor Desk Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v004z
SKU: STAND-V004Z
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
Phillips
Screwdriver
A (x1)
Pole
B(x1)
Pole
C(x1)
Arm
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D(x2)
VESA Bracket
E (x1)
Base
F (x1)
Pole Connector
G (x6)
Cable Clip
H (x2)
Cable Clip
M-A (x16)
M4x12
M-B (x16)
M5x12
I (x1)
Base Cover
J(x1)
3mm Allen Key
M-C (x16)
D5 Washer
K(x1)
5mm Allen Key
L (x1)
6mm Allen Key
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
17.6lbs
(8 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PER ARM
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• TO PREVENT TIPPING, PLEASE BE CAREFUL NOT TO EXTEND THE ARMS TOO FAR FORWARD
OR BACKWARD.
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

3
ASSEMBLY STEPS
STEP 1
STEP 2
Slide cable management clip (H) and base cover (I) on to bottom of pole (A). Thread pole (A) onto
base (E) and tighten grub screws using 3mm allen key (J).
Slide arm (C) and bracket (D) over top of pole and tighten using 5mm allen key (K).
A
H
I
J
E
K
C
D
23mm
K

4
STEP 3
Slip cable management clip (H) over bottom of top pole (B). Use pole connector (F) to attach pole (B)
to pole (A) as shown in diagram. Tighten grub screws using 3mm allen key (J).
STEP 4
Slide bracket (D) over top of pole (B). Tighten using 5mm allen key (K).
H
F
B
J
K
D

5
STEP 5
STEP 6
Attach cable management clips (G) to to arm (C) as shown in diagram.
Attach two bolts (M-A or M-B) and washers (M-C) to top mounting holes of monitor, making sure
to leave 3mm of threads exposed. Aline bolts (M-A or M-B) in VESA plate. Secure using two more
bolts (M-A or M-B) and washers (M-C) in the bottom two holes. Tighten all four bolts using phillips
screwdriver.
G
M- A
M- B
M- C
12
3m m
3
M- A
M- B
M- C

6
STEP 7
STEP 8
Adjust tension in monitor bracket with 6mm allen key (L) as shown in diagram.
Store Allen keys (L, J, K) in cable management clips (H) for future adjustment.
+45 °
-45 °
L
K
L
J

7
STEP 9
Do not move monitors past center of gravity. This could result in tipping.
STEP 10
Adjust height of monitors using 5mm allen key (K) as shown in diagram.
360° 360°
360°
360°
K

LAST UPDATED: 03/05/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303