Vivo PP-2-G060C User manual

Frosted Clamp-on Desk Privacy Panels (x2)
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/pp-2-g060c
SKU: PP-2-G060C
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2 3
ASSEMBLY STEPS
STEP 1
Separate Clamp (B) into three parts: Clamp Front (B1), Clamp Back (B2), and
Lower Clamp (B3).
PACKAGE CONTENTS
WARNING!
A (x2)
Panel
B(x4)
Clamp
C(x8)
Pad
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE MAY NOT BE USED
TOOLS NEEDED
Phillips
Screwdriver
S-A (x8)
ST3.9x25
STEP 2
Remove protective film from Pads (C) and apply to the underside of each clamp.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
S-B (x4)
M6x12
S-C (x4)
M6x25
S-D (x4)
M6x40
D(x8)
Plastic Pad
T-A (x2)
Allen Wrench
B2
B
B3
B1

4 5
STEP 3
Place the Plastic Pads (D) on the inner face of Clamp Front (B1) and Clamp Back (B2)
D
S-A
STEP 4b
STEP 4a
OPTION A: 3/4” - 1” (18mm - 21mm) Desktop
Attach Lower Clamps (B3) to the underside of the desk edge using
ST3.9x25mm Screws (S-A). For correct fit, the space between the clamps
must be no more than 18” (455mm). Slide the Back Clamps (B2) onto
Lower Clamps (B3), and secure using M6x25mm Screws (S-C) and Allen
Wrench (T-A).
OPTION B: 1” - 2” (25mm - 50mm) Desktop
Slide Back Clamp (B2) onto Lower Clamps (B3), and partially insert
M6x25mm Screws (S-C) or M6x40mm Screws (S-D) depending on the
desktop thickness. Place the clamps on the edge of the desk, and tighten
using the Allen Wrench (ST-A). NOTE: For correct fit, the space between the
clamps must be no more than 18” (455mm).
D
B1
B2
S-C
B2
B3 S-C
S-D
T-A
T-A T-A
18-21mm

6 7
STEP 5
Slide Front Clamps (B1) onto Back Clamps (B2).
STEP 7
Insert the M6x12mm Screws (S-B) into the Front Clamps (B1), and tighten with Allen
Wrench (T-A).
STEP 6
Remove protective film from the Panels (A) place into the clamps, making sure the
panels are fit between the plastic pads.
B2
B1
B1
T-A

LAST UPDATED: 03/21/2023
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303