2 3
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED
ASSEMBLY STEPS
STEP 3
WARNING!
Phillips
Screwdriver
A (x1)
Desk
STEP 1
Carefully remove desk (A) from packaging
and set on table.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
33lbs
14.97kg
STEP 5
Flip keyboard tray (C) upside down and
attach brackets (B) to tray using M5x12
screws (D) with a Phillips screwdriver.
Place laptop, monitor, and other items on
desk surface.
B (x2)
Keyboard Bracket
D (x6)
M5x12 Screw
E (x6)
M5x12 Screw
C (x1)
Keyboard Tray
STEP 4
STEP 6
Mount keyboard tray with brackets to desk
using M5x12 screws (E) with a Phillips
screwdriver.
Manage cables using zipties (F).
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (17” / 43 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
STEP 2
Remove shipping straps from the desk
(A). Squeeze handle and li desktop to
maximum height.
F (x2)
Ziptie
A
B
C
D
E
