manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Vivo
  6. •
  7. Rework Station
  8. •
  9. Vivo DESK-V000VC User manual

Vivo DESK-V000VC User manual

43.5” x 22” Sit-Stand Desktop Workstation
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v000vc
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: DESK-V000VC
2 3
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED
ASSEMBLY STEPS
STEP 2
WARNING!
Phillips
Screwdriver
A (x1)
Desktop
STEP 1
Carefully remove the desktop (A) from the
packaging and ip the desktop (A) onto a
at surface. Attach the extended feet (B)
to the frame using screws (C).
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
33lbs
14.97kg
STEP 4
Press the handles on each side and li the
desktop (A).
Place laptop, monitor, and other items on
desk surface. Attach cable clip (E) to desk
to manage keyboard and mouse cables.
Manage cables using cable zipties (F).
B (x2)
Extended Feet
C (x10)
M5x10 Screw
D (x6)
M5x12 Screw
E (x1)
Cable Clip
F (x2)
Ziptie
G (x1)
Keyboard Tray
H(x2)
Bracket
STEP 3
STEP 5
Mount brackets (H) to keyboard tray (G)
using M5x10 screws (C). Mount keyboard
tray to desk using M5x12 screws (D).
If locks are not releasing properly to change
desk height, adjust the position of the black
tube containing the steel release cable.
Turn the nuts at the end of the tube just
behind the handle as shown, moving the
tube away from the handle until the cable
once again has proper tension, then tighten
the nuts.
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
C
B
C
G
H
D
E
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Last Updated: 1/9/2019
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654

Popular Rework Station manuals by other brands

Page IR3100 manual

Page

Page IR3100 manual

WilTec AOYUE INT866 Operation manual

WilTec

WilTec AOYUE INT866 Operation manual

jbc RM manual

jbc

jbc RM manual

Baskiville PACE IR 3000 Operation and maintenance manual

Baskiville

Baskiville PACE IR 3000 Operation and maintenance manual

jbc DDSE-9C instruction manual

jbc

jbc DDSE-9C instruction manual

JOVY Systems RE-8500 Quick start up guide

JOVY Systems

JOVY Systems RE-8500 Quick start up guide

Quick Tools QU959D+ user manual

Quick Tools

Quick Tools QU959D+ user manual

Weller WR 3ME operating instructions

Weller

Weller WR 3ME operating instructions

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.