Vivotek FD8137H User manual

User’s Manual
Fixed Dome
NetworkCamera
1MP • H.264 • MicroSD/SDHC/SDXC • Compact Design
FD8137H/8137HV
Rev. 1.1

VIVOTEK
2 - User's Manual
Table of Contents
Overview .....................................................................................................................................................4
Revision History ...................................................................................................................................... 4
Read Before Use..................................................................................................................................... 5
Package Contents ................................................................................................................................... 5
Symbols and Statements in this Document............................................................................................. 5
Hardware Installtion - FD8137H ..............................................................................................................6
Physical Description ................................................................................................................................ 6
Installation ............................................................................................................................................... 8
Network Deployment .......................................................................................................................... 10
Hardware Installtion - FD8137HV ......................................................................................................... 11
Software Installation .............................................................................................................................. 16
Ready to Use......................................................................................................................................... 17
Completion ............................................................................................................................................ 18
Accessing the Network Camera ............................................................................................................19
Using Web Browsers............................................................................................................................. 19
Using RTSP Players.............................................................................................................................. 22
Using 3GPP-compatible Mobile Devices............................................................................................... 23
Using VIVOTEK Recording Software .................................................................................................... 24
Main Page.................................................................................................................................................25
Go to..........................................................................................................................................................28
Client Settings ..........................................................................................................................................30
Conguration............................................................................................................................................34
System > General settings .................................................................................................................... 35
System > Homepage layout ................................................................................................................. 37
System > Logs ...................................................................................................................................... 40
System > Parameters ........................................................................................................................... 42
System > Maintenance.......................................................................................................................... 43
Media > Image .................................................................................................................................... 47
Media > Video ....................................................................................................................................... 54
Media > Video ....................................................................................................................................... 55
Media > Audio........................................................................................................................................ 59
Network > General settings................................................................................................................... 60
Network > Streaming protocols ........................................................................................................... 67
Network > SNMP (Simple Network Management Protocol).................................................................. 76
Security > User accounts ...................................................................................................................... 77
Security > HTTPS (Hypertext Transfer Protocol over SSL) ........................................................ 78
Security > Access List ......................................................................................................................... 85
PTZ > PTZ settings ............................................................................................................................... 90
Event > Event settings........................................................................................................................... 94
Applications > Motion detection........................................................................................................... 107
Applications > Digital input .................................................................................................................. 110
Applications > Tampering detection .................................................................................................... 110
Applications > VADP (VIVOTEK Application Development Platform (FD8137H Series)......................111
Recording > Recording settings ......................................................................................................... 113

VIVOTEK
User's Manual - 3
Local storage > SD card management..................................................................................................... 118
Local storage > Content management ..................................................................................................... 119
Appendix .................................................................................................................................................... 122
URL Commands for the Network Camera................................................................................................ 122
Technical Specications ...........................................................................................................................194
Technology License Notice.......................................................................................................................195
Electromagnetic Compatibility (EMC)....................................................................................................... 196

VIVOTEK
4 - User's Manual
Overview
VIVOTEK FD8137H/8137HV is an easy-to-use fixed dome network camera specifically
designed for indoor/outdoor security applications with a compact, stylish vandal-proof exterior.
It features a HD WDR CMOS sensor to cope with challenging lighting conditions. The WDR Pro
Technology allows the camera to capture both dark and bright parts of an image and combines
the differences to generate a highly realistic image representative of the original scene, enabling
it to provide video quality close to the capabilities of the human eye. This function enables the
FD8137H series to be widely applicable in high contrast environments such as lobby entrances,
parking lots, ATMs, loading areas, and much more.
In order to adapt to constantly changing outdoor lighting conditions, the FD8137H series
features a removable IR-cut filter as well as improved IR illuminators effective up to 15M for
superior image quality around the clock.
For protection against harsh outdoor environments, the FD8137HV is encased in an IP66-rated
housing to withstand rain and dust. Furthermore, the metal vandal-proof housing effectively
provides robust protection from vandalism.
The FD8137H series supports the industry-standard H.264 compression technology, drastically
reducing file sizes and conserving valuable network bandwidth. With H.264, and MJPEG
compatibility both included, the dual streams can be simultaneously transmitted in any of these
formats at different resolutions, frame rates, and image qualities for versatile platforms. Thereby
it further optimizes bandwidth and storage efciency.
Incorporating a number of advanced features standard for VIVOTEK cameras, including tamper
detection, 802.3af compliant PoE, MicroSD/SDHC/SDXC card slot, and VIVOTEK’s 32-channel
recording software, the FD8137H series is the ideal solution for your indoor/outdoor surveillance
needs.
Revision History
■ Rev. 1.0: Initial release.
■ Rev. 1.1: The later revision of rmware, 0101a, supports the 3D Noise Reduction
conguration.

VIVOTEK
User's Manual - 5
Read Before Use
The use of surveillance devices may be prohibited by law in your country. The Network Camera
is not only a high-performance web-ready camera but can also be part of a exible surveillance
system. It is the user’s responsibility to ensure that the operation of such devices is legal before
installing this unit for its intended use.
It is important to first verify that all contents received are complete according to the Package
Contents listed below. Take note of the warnings in the Quick Installation Guide before the Network
Camera is installed; then carefully read and follow the instructions in the Installation chapter to
avoid damage due to faulty assembly and installation. This also ensures the product is used
properly as intended.
The Network Camera is a network device and its use should be straightforward for those who
have basic networking knowledge. It is designed for various applications including video sharing,
general security/surveillance, etc. The Configuration chapter suggests ways to best utilize the
Network Camera and ensure proper operations. For creative and professional developers, the URL
Commands of the Network Camera section serves as a helpful reference to customizing existing
homepages or integrating with the current web server.
Package Contents
■ FD8137H / FD8137HV
■ Screws / cable tie (indoor)/ Terminal block plug-in / Waterproof connector (outdoor)
■ Software CD
■ Quick Installation Guide
■ Alignment sticker
Symbols and Statements in this Document
i
INFORMATION: provides important messages or advices that might help prevent
inconvenient or problem situations.
NOTE: Notices provide guidance or advices that are related to the functional integrity of
the machine.
Tips: Tips are useful information that helps enhance or facilitae an installation, function,
or process.
WARNING! or IMPORTANT!: These statements indicate situations that can be
dangerous or hazardous to the machine or you.
Electrical Hazard: This statement appears when high voltage electrical hazards might
occur to an operator.

VIVOTEK
6 - User's Manual
Physical Description
Hardware Installtion - FD8137H
Lens
IR LEDs (8 units, distance 15m)
Reset Button Status LED
Light Sensor
MicroSD/SDHC/SDXC Card Slot
Black Cover
Microphone
contacts
DI
RJ45 Plug
Cable clip

VIVOTEK
User's Manual - 7
Pin Name
+ Digital Input +
- Digital Input -
General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is used to connect
external input / output devices. The pin denitions are described below. The 24V AC can
be used as an alternate power source.
Hardware Reset
The reset button is used to reset the system or restore the factory default settings.
Sometimes resetting the system can return the camera to normal operation. If the system
problems remain after reset, restore the factory settings and install again.
Reset: Press and release the recessed reset button with a straightened paper clip. Wait for
the Network Camera to reboot.
Restore: Press and hold the recessed reset button until the status LED rapidly blinks. Note
that all settings will be restored to factory default. Upon successful restore, the status LED
will blink green and red during normal operation.
Micro SD/SDHC/SDXC Card Capacity
This network camera is compliant with Micro SD/SDHC/SDXC 16GB / 8GB and other
preceding standard SD cards.

VIVOTEK
8 - User's Manual
Installation
Removing Dome Cover
First, follow the instructions below to remove the dome cover. Flip the black retention tabs
in the clockwise direction to release the dome cover (clockwise if you look from the bottom
up.)
Then remove the black cover as shown below.

VIVOTEK
User's Manual - 9
To install the camera to a ceiling or wall:
1.Attach the alignment sticker to the ceiling/wall.
2.Through the two circles on the sticker, drill two pilot holes into the ceiling/wall.
3. The Network Camera can be mounted with the cable routed through the ceiling/wall or
from the side. If you want to feed the cable through the ceiling/wall, drill a cable hole A as
shown in the above picture.
4.Hammer the supplied plastic anchors into the holes.
5.Secure the camera with the supplied screws.
A
A

VIVOTEK
10 - User's Manual
Network Deployment
Set up the Network Camera through Power over Ethernet (PoE)
When using a PoE-enabled switch
The Network Camera is PoE-compliant, allowing transmission of power and data via a
single Ethernet cable. Follow the below illustration to connect the Network Camera to a
PoE-enabled switch via Ethernet cable.
When using a non-PoE switch
If your switch/router does not support PoE, use a PoE power injector (optional) to connect
between the Network Camera and a non-PoE switch.
POWER C
OLLIS
ION
LINK
RE
CEIVE
PARTITION
12345
PoE Switch
power + data transmission
POWER C
OLLIS
ION
LINK
RECEIVE
PARTITION
12345
PoE Power Injector
(optional)
Non-PoE Switch

VIVOTEK
User's Manual - 11
Hardware Installtion - FD8137HV
Lens
IR LEDs (8 units, distance 15m)
Reset Button
Status LED
Light Sensor
MicroSD/SDHC/SDXC Card Slot
Black Cover
RJ45 Plug
Microphone
contacts
DI

VIVOTEK
12 - User's Manual
2. Then remove the black cover as shown below.
Hardware Installation
1. Remove the dome cover.
To LAN/WAN
M8X1.25
3. Pass Ethernet and DI wires through the rubber seals and the waterproof connectors.
Cable gauge:
Ethernet: 5~6.3mm
DI: 1~2mm

VIVOTEK
User's Manual - 13
A
A
Wall Mount
Ceiling Mount
1. Attach the alignment sticker to the ceilling/wall.
3. If you want to feed the cable through the ceiling/wall, drill a cable hole A as shown in the
above picture.
2. Drill three pilot holes into the ceilling/wall.
4. Hammer the supplied plastic anchors into the holes.
5. Secure the camera using the supplied screws.

VIVOTEK
14 - User's Manual
Adjust the camera lens to the desired viewing angle:
1. Loosen the tilt adjustment screws on both sides
Adjusting the Lens
123
Loosen
Tighten
Pan 350°
Rotate 350°
Tilt: 60°
2. Turns the lens modules toward the direction you prefer.
3. Tighten the adjustment screws.
2
1
1.Attach the black cover. If you feed the cable from the side, route cables from the groove
at the bottom.
2.Attach the dome cover.

VIVOTEK
User's Manual - 15
Internet connection via a router
Before setting up the Network Camera over the Internet, make sure you have a router and
follow the steps below.
1. Connect your Network Camera behind a router, the Internet environment is illustrated
below. Regarding how to obtain your IP address, please refer to Software Installation on
page 16 for details.
IP address : 192.168.0.3
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
IP address : 192.168.0.2
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
LAN (Local Area Network)
Router IP address : 192.168.0.1
WAN (Wide Area Network )
Router IP address : from ISP
Cable or DSL Modem
POWER COLLISION
LINK
RECEIVE
PARTITION
12345
Internet
2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is
192.168.0.3, please forward the following ports for the Network Camera on the router.
■ HTTP port: default is 80
■ RTSP port: default is 554
■ RTP port for audio: default is 5558
■ RTCP port for audio: default is 5559
■ RTP port for video: default is 5556
■ RTCP port for video: default is 5557
If you have changed the port numbers on the Network page, please open the ports
accordingly on your router. For information on how to forward ports on the router, please
refer to your router’s user’s manual.
3. Find out the public IP address of your router provided by your ISP (Internet Service
Provider).
Use the public IP and the secondary HTTP port to access the Network Camera from the
Internet. Please refer to Network Type on page 60 for details.
Internet connection with static IP
Choose this connection type if you are required to use a static IP for the Network Camera.
Please refer to LAN setting on page 60 for details.
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line. Please
refer to PPPoE on page 61 for details.

VIVOTEK
16 - User's Manual
Software Installation
Installation Wizard 2 (IW2), a software included in the product CD, helps you set up your
Network Camera on the LAN.
1. Install IW2 under the Software Utility directory from the software CD.
Double-click the IW2 shortcut on your desktop to launch the program.
2. The program will conduct an analysis of your network environment.
After your network environment is analyzed, please click Next to continue the program.
3. The program will search for all VIVOTEK network devices on the same LAN.
4. After a brief search, the installer window will prompt. Click on the MAC and model name
that matches the one printed on the product label. You can then double-click on the address
to open a management session with the Network Camera.
0002D1730202
00-02-D1-73-02-02 192.168.5.151 FD8164
Installation
Wizard 2
IW
2
Network Camera
Model No: FD8164
Made in Taiwan
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Pat. 6,930,709
MAC:0002D1730202
R o H S

VIVOTEK
User's Manual - 17
Ready to Use
1.A browser session with the Network Camera should prompt as shown below.
2.You should be able to see live video from your camera. You may also install the 32-channel
recording software from the software CD in a deployment consisting of multiple cameras. For
its installation details, please refer to its related documents.
To adjust the viewing angle -- 3-axis mechanism design
1.Loosen the tilt adjustment screws and then turn the lens module up or down, or swing left or
right. Upon completion, tighten the screw.
2.Turn the lens to adjust the image orientation.
1
23
Loosen Tighten
Pan 350°
Rotate 350°
Tilt: 60°
Schwenken 350°
Neigen 60°
Drehen 350°

VIVOTEK
18 - User's Manual
Completion
1. Align the inner side of the black cover with the notches on both sides of the lens, x the
black cover.
2.If you choose to feed the cable through the ceiling/wall, arrange the cable neatly through
the cable hole. If you choose to feed the cable from the side, remove the plastic side lid B.
3.Attach the dome cover to the camera as shown below. The dome cover cannot be
attatched if installed in the wrong orientation. Align the side lid (or side cutout) with where
the cable comes out from the camera. Press the dome cover to join with the camera.
4.Finally, make sure all parts of the camera are securely installed.
2
1
B
3

VIVOTEK
User's Manual - 19
Accessing the Network Camera
This chapter explains how to access the Network Camera through web browsers, RTSP players,
3GPP-compatible mobile devices, and VIVOTEK recording software.
Using Web Browsers
Use Installation Wizard 2 (IW2) to access the Network Cameras on LAN.
If your network environment is not a LAN, follow these steps to access the Netwotk Camera:
1. Launch your web browser (e.g., Microsoft®Internet Explorer or Mozilla Firefox).
2. Enter the IP address of the Network Camera in the address eld. Press Enter.
3. Live video will be displayed in your web browser.
4. If it is the rst time installing the VIVOTEK network camera, an information bar will prompt as
shown below. Follow the instructions to install the required plug-in to your computer.
NOTE
► For Mozilla Firefox users, your browser will use Quick Time to stream the live video. If you
don’t have Quick Time on your computer, please download it first, then launch the web
browser.
NOTE:

VIVOTEK
20 - User's Manual
► By default, the Network Camera is not password-protected. To prevent unauthorized access,
it is highly recommended to set a password for the Network Camera.
For more information about how to enable password protection, please refer to Security on
page 77.
► If you see a dialog box indicating that your security settings prohibit running ActiveX®
Controls, please enable the ActiveX®Controls for your browser.
1. Choose Tools > Internet Options > Security > Custom Level.
2. Look for Download signed ActiveX®controls; select Enable or Prompt. Click OK.
3. Refresh your web browser, then install the ActiveX®control. Follow the instructions to
complete installation.