VM Audio VMCS21 User manual

Use the supplied Audio Cable to connect to mp3 players,
smartphones, notebooks and tablets. (refer to the Setup
section)
Use Stereo RCA Cables (not included) to connect to TV or
game console sets. (refer to the Setup section)
• Turn on the speaker system.
• Set the Main volume to the nine o’clock position to start.
• Set the Bass volume to the nine o’clock position to start.
• Turn on audio source and launch media.
• Adjust volume settings as needed.
2.1 Speaker System
Quick Installation
Guide
VMCS21
VM Audio Tech Support
US / Canada
phone: (855) audio-99 / [phone]
email: [email protected]
© VM Audio All rights reserved. All trade names are registered trademarks of
respective manufacturers listed.
System is not powering on?
• Switch power button on and verify if the LED indicator is
illuminated.
• Confirm that the AC plug is plugged in and that there is power
to that outlet.
Speaker(s) does not produce sound?
• Verify the system is getting power and check above steps.
• Make sure the volume is turned up to an audible listening level
and/or your PC is not in a mute status.
• Verify that all cables are plugged into the correct jacks.
• Try connecting your system to another audio source or device.
If the system works correctly with the other device, then your
first device is most likely the cause of the problem.
Sound is distorted or is not clear?
• Low quality compressed music files will increase the distortion
and noise that are easily noticed with amplified speakers.
Recheck sound quality with a non-compressed music file.
• Check the audio source level and decrease if necessary. You
should never have your source volume above 90% volume level
to minimize distortion.
| 7 | 8 | 9 | 10
Rev. 1
2.1 Speaker System
VMCS21
L
L
R
R
AUDIO OUTPUT
AUDIO INPUT
ON
OFF
AC IN
˜
POWER SWITCH
1. Use a Stereo RCA Cable (not included) to plug into
the audio output of a TV or game console.
2. Plug the other end of the cable into the Input Section
of the Subwoofer.
Setup (option 3) 5. Operation 6. Troubleshooting Caution & Warning
CAUTION
RISK OF ELECTIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
• Avoid high temperatures. Allow for sufficient heat dispersion
when installed in a rack.
• Keep the bass module free from moisture, water, and dust.
• Do not let foreign objects into the port opening of the subwoofer.
• Handle the power cord carefully. Hold the plug when unplugging
the cord.
• Unplug the power cord when not using the unit for long period
of time.
• Do not let flammable sprays come in contact with the unit.
• Never disassemble or modify the unit in any way.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE

L
L
R
R
AUDIO OUTPUT
AUDIO INPUT
ON
OFF
AC IN
˜
POWER SWITCH
RCA to 3.5mm Audio Cable
2.1 Speaker System
Quick Installation
Guide
VMCS21
Rev. 1
2. Connections/Controls
Connections
3. Power Switch
4. AC Power Cord
5. Audio Input
6. Speaker Output
Controls
1. Main Volume
2. Bass Volume
35
6
4
2
1
1. Plug the speaker wires into the Output RCA jacks on
the Subwoofer.
2. Plug the Subwoofer Power Cord into an electrical
outlet.
| 1 | 2 | 3 | 4 | 5 | 6
L
L
R
R
AUDIO OUTPUT
AUDIO INPUT
ON
OFF
AC IN
˜
POWER SWITCH
Two Satellite Speakers and One Subwoofer
Quick Guide
Connections/Controls 3. Connect 4. Setup (option 1) Setup (option 2)
L
L
R
R
AUDIO OUTPUT
AUDIO INPUT
ON
OFF
AC IN
˜
POWER SWITCH
1. Use the Stereo 3.5mm side of the Audio Cable
(included) to plug to the headphone or audio output of a
tablet or notebook.
2. Plug the other end of the Audio Cable into the Input
Section of the Subwoofer.
L
L
R
R
AUDIO OUTPUT
AUDIO INPUT
ON
OFF
AC IN
˜
POWER SWITCH
1. Use the Stereo 3.5mm side of the Audio Cable
(included) to plug to the headphone output of a
smartphone or mp3 player.
2. Plug the other end of the Audio Cable into the Input
Section of the Subwoofer.
1. Inside The Box