Vmac A500237 User manual

www.vmacair.comwww.vmacair.com
Installation Manual for VMAC
Accessory
A500237
Remote Control Panel for G300004
®

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
1
Table of Contents
Safety ..............................................................3
Warranty ...........................................................4
General Information.................................................6
Illustrated Parts List ................................................8
PTFE Tubing, Loom, and Push-To-Connect Fittings ..................10
Maintenance and Repair Safety .................................... 11
Installation......................................................... 12
Completing the Installation ....................................... 29

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
2
Notice
Copyright © 2021 VMAC Global Technology Inc. All Rights Reserved. These
materials are provided by VMAC for informational purposes only, without
representation or warranty of any kind, and VMAC shall not be liable for errors
or omissions with respect to the materials. The only warranties for VMAC
products and services are those set forth in the express warranty statements
accompanying such products and services, if any, and nothing herein shall be
construed as constituting an additional warranty. Printing or copying of any page
in this document in whole or in part is only permitted for personal use. All other
use, copying or reproduction in both print and electronic form of any part of this
document without the written consent of VMAC is prohibited. The information
contained herein may be changed without prior notice.
Printed in Canada
Additional Application Information
For use with VMAC G300004, Gas Driven Air Compressor.
Registered Trademarks
All trademarks mentioned in this manual are the property of their respective
owners. VMAC’s use of manufacturers’ trademarks in this manual is for
identification of the products only and does not imply any affiliation to, or
endorsement of said companies.
Loctite®, Loctite®242 and Loctite®567 are registered trademarks of Henkel AG &
Company KGaA.
Important Information
The information in this manual is intended for certified VMAC installers who
have been trained in installation and service procedures and/or for anyone with
mechanical trade certification who has the tools and equipment to properly and
safely perform the installation or service. Do not attempt installation or service
without the appropriate mechanical training, knowledge and experience.
Follow all safety precautions. Any fabrication for correct fit in modified vehicles
must follow industry standard “best practices”.
Document: 1901173
Changes and Revisions
Revision Revision Details Revised by
Checked by
Implemented
Eng. Tech. Qual.
Mech. Elec.
A Initial Release MSP NAC N/A MSP LPH 27 Oct. 2021
B ECN: 22-069 Update choke cable MSP NAC N/A MSP LPH 4 May 2022
CECN: 23-059 Add harness update instructions MSP SPT N/A MSP LPH 28 Mar. 2023

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
3
Safety
This symbol is used to call attention to instructions concerning
personal safety. Watch for this symbol; it points out important
safety precautions, it means, “Attention, become alert! Your personal
safety is involved”. Read the message that follows and be aware
of the possibility of personal injury or death. As it is impossible
to warn of every conceivable hazard, common sense and industry
standard safety practices must be observed.
This symbol is used to call attention to instructions on a specific
procedure that if not followed may damage or reduce the useful life
of the compressor or other equipment.
This symbol is used to call attention to additional instructions or
special emphasis on a specific procedure.
Important Safety Notice
The information contained in this manual is based on sound engineering principles,
research, extensive field experience and technical information. Information
is constantly changing with the addition of new models, assemblies, service
techniques and running OEM changes. If a discrepancy is found in this manual,
contact VMAC Technical Support prior to initiating or proceeding with installation,
service or repair. Current information may clarify the issue. Anyone with knowledge
of such discrepancies, who proceeds to perform service and repair, assumes all
risks.
Only proven service procedures are recommended. Anyone who departs from the
specific instructions provided in this manual must first ensure that their safety and
that of others is not being compromised, and that there will be no adverse effects
on the operational safety or performance of the equipment.
VMAC will not be held responsible for any liability, consequential damages, injuries,
loss or damage to individuals or to equipment as a result of the failure of anyone
to properly adhere to the procedures set out in this manual or standard safety
practices.
Safety should be the first consideration when performing any service operations.
If there are any questions concerning the procedures in this manual, or more
information is required, please contact VMAC Technical Support prior to beginning
work.
Safety Messages
This manual contains various warnings, cautions and notices that must be
observed to reduce the risk of personal injury during installation, service or repair
and the possibility that improper installation, service or repair may damage the
equipment or render it unsafe.

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
4
VMAC Standard Warranty (Limited)
For complete warranty information, including both VMAC Standard
Warranty (Limited) and VMAC Lifetime Warranty (Limited)
requirements, please refer to our current published warranty located
at: www.vmacair.com/warranty
If you do not have access to a computer, please contact us and we
will be happy to send you our warranty.
VMAC’s warranty is subject to change without notice.
VMAC Lifetime Warranty (Limited)
A VMAC Lifetime Limited Warranty is offered
on the base air compressor only and only on
UNDERHOOD, Hydraulic Driven, Transmission
Mounted, Gas and Diesel Engine Driven Air
Compressors, Multifunction Power Systems, and
other products as defined by VMAC, provided
that (i) the purchaser fully completes and submits
a warranty registration form within 3 months
of purchase, or 200 hours of operation, whichever occurs first; (ii) services are
completed in accordance with the Owner’s Manual; (iii) proof of purchase of
applicable service kits are made available to VMAC upon request.
The VMAC Lifetime Warranty is applicable to new products shipped on or after 1
October, 2015.
Warranty Registration
Warranty registration for VMAC systems can be completed online or by filling in
the form at the back of each system installation manual. Warranty registration
must be completed and sent to VMAC at the time the system is put into service for
any subsequent warranty claim to be considered valid.
There are 4 ways the warranty can be registered with VMAC:
www.vmacair.com/warranty
[e-mail]
[phone]
VMAC - Vehicle Mounted Air Compressors
1333 Kipp Road, Nanaimo, BC, Canada V9X 1R3
LIFETIME
A
I
R
I
N
N
O
V
A
T
E
D
T
R
U
S
T
S
E
R
V
I
C
E
V
A
L
U
E
WARRANTY
Warranty

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
5
VMAC warranty work must be pre-authorized by VMAC. Claims are
processed via our dealer network. If you are not a VMAC dealer,
please select one to work with via our Dealer Locator:
https://www.vmacair.com/dealer-locator/
1) Communicate with VMAC Technical Support at 1-888-241-2289 or
[e-mail] to help diagnose/troubleshoot the problem prior to repair.
VMAC technical support will require the VMAC System ID, and the hours on
the compressor.
2) VMAC will provide direction for repair or replacement of the failed
components.
3) If requested, failed parts must be returned to VMAC for evaluation.
4) Dealers may login to the VMAC website to view the "VMAC Labour Time
Guide" (under “Agreements”) to see the allowable warranty labour times.
5) Warranty invoices must include the Service Ticket number, VMAC System ID#,
hours on the compressor, and a detailed description of the work performed.
6) VMAC Warranty does not cover consequential damages, overtime charges,
mileage, travel time, towing/recovery, cleaning or shop supplies.
7) Dealers submit warranty claims on behalf of the Vehicle Owner/End User
affected by the defective part(s). The dealer ensures that all warranty credits
are refunded back to the Vehicle Owner/End User who made the initial
warranty claim.
VMAC Warranty Claim Process
In order to qualify for Lifetime Warranty (Limited), the completed
warranty registration form must be received by VMAC within 3
months of the buyer receiving the Product(s), or 200 hours of
operation, whichever occurs first.
If the completed warranty registration form has not been received
by VMAC within 3 months of the buyer receiving the Product(s),
or 200 hours of operation, the “Standard” warranty period will be
deemed to commence 30 days from the date of shipment from
VMAC.
Failure to follow the warranty claim process may result in denial of
the warranty claim.
VMAC Product Warranty Policies & Warranty Registration can be found on the
VMAC website (see previous page for URL).

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
6
General Information
Optional Equipment Compatibility
While VMAC strives to design systems compatible with optional OEM equipment
(such as running boards), it is impractical to develop systems that accommodate
every OEM and aftermarket option or add-on. Whenever possible, VMAC
endeavors to advise of compatibility issues in the “Additional Application
Information” section of the manual. Even when specific optional equipment is
determined by VMAC to be incompatible, it does not preclude the vehicle upfitter
or end user from modifying the optional equipment to make it compatible with
the installed VMAC system. VMAC does not warrant or accept responsibility or
liability for the fitment, function, or safety of any products modified in any way not
expressly outlined in the installation manual.
Before Starting
Read this manual prior to beginning the installation to ensure familiarity with the
components and how they will fit on the vehicle. Identify any variations from the
application list such as vehicle model, engines, or optional equipment (e.g., dual
alternator, active steering assist, etc.).
Open the package, unpack the components and identify them using the Illustrated
Parts List (IPL) included in the Fastener Pack.
Hose Information
Depending on other installed equipment, it might be necessary to move the air/oil
separation tank from its intended location. The hoses used in VMAC compressor
systems have a specific inner liner that is compatible with VMAC compressor oil.
Use of hoses other than those supplied or recommended by VMAC may cause
compressor damage and may void your warranty. Please contact VMAC for
replacement hoses and further information.
Ordering Parts
To order parts, contact a VMAC dealer. The dealer will ask for the VMAC serial
number, part number, description and quantity. Locate the nearest dealer online at
www.vmacair.com/dealer-locator or call 1-877-912-6605.

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
7
Special Tools Required
Table 1 — Torque Table
Standard Grade 8 National Coarse Thread
Size (in) 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4
Foot pounds (ft•lb) 918 35 55 80 110 170 280
Newton meter (N•m) 12 24 47 74 108 149 230 379
Standard Grade 8 National Fine Thread
Size (in) 3/8 7/16 1/2 5/8 3/4
Foot pounds (ft•lb) 40 60 90 180 320
Newton meter (N•m) 54 81 122 244 434
Metric Class 10.9
Size (mm) M6 M8 M10 M12 M14 M16
Foot pounds (ft•lb) 4.5 19 41 69 104 174
Newton meter (N•m) 625 55 93 141 236
• None.
Torque values are with Loctite applied unless otherwise specified.
Apply Loctite 242 (blue) to all fasteners (except nylon lock nuts)
unless otherwise stated.
All fasteners must be torqued to specifications. Use manufacturers’ torque values
for OEM fasteners.
The torque values supplied in Table 1 are intended for VMAC supplied components,
or for use as a guide in the absence of a torque value provided by an OEM.

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
8
Illustrated Parts List

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
9
ITEM QTY. PART # DESCRIPTION
1 1 1901173 INSTR, REMOTE KIT, G300004
2 1 1200992 PLATE, WIRED REMOTE START
3 1 4401274 LABEL, CONTROL PANEL
4 1 3501134 SWITCH, KEY, ON OFF START
5 1 3501371 HOUR METER
6 1 3550973 HARNESS, REMOTE START, SEALED
7 1 5800191 CABLE, PUSH PULL 120.0”
8 2 1500710 SCREW, SHCS, M3 X 14
9 2 1560517 NUT, NYLOCK SS, M3
10 1 1570044 WASHER, ALLOY PL SAE, 3/8
11 [email protected] 1700570 TUBE, TEFLON, PTFE,1/4”OD
12 15 2200164 TIE, NYLON, BLACK, 8”
13 11500704 SCREW, CAP, HEX, 3/8-16 X 1/2
14 140 3501047 WIRE, STRANDED, 18 AWG, BLK TXL
15* 2@130.0 1700581 LOOM, SPLIT PLASTIC, 1/4, HIGH TEMP
16* 120 1700581 LOOM, SPLIT PLASTIC, 1/4, HIGH TEMP
17* 19500360 REMOTE CHOKE STAY, HONDA
18 1 1201002 BRACKET, REMOTE UNLOADER
19 21500667 SCREW, FLAT PHILLIPS, SS, M6X1X16
20 2 1560516 NUT, M6 X 1.0 FL PL
21 12200189 CLAMP, INSULATED, 3/8”
22 21570514 WASHER, FLAT, ALUM, #6
23 15000020 ELBOW, BRASS NPT-POLY, 1/8-1/4
24 42200019 TIE, NYLON MD, 6”
25 15000212 CONNECTOR,BRASS, FNPT-POLY, 1/8-1/4
26 11550006 NUT, NYLOCK NC PL, 3/8
27 12200268 1/2”, .406 HOLE, J-CLIP
28 11500677 SCREW, PHMS, M5 X .8 X 20
29* 13551150 JUMPER, THERMAL SWITCH, G300004
*Items 15, 16, 17, and 29 not shown.

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
10
PTFE Tubing, Loom, and Push-To-Connect
Fittings
All hoses, tubes and wires that are installed, rerouted or shifted
during the installation must be secured so that they do not contact
any hot, sharp or moving parts. Use rubber coated P-clips wherever
possible. Follow the routing suggestions in this manual and cover all
hoses with plastic loom.
When routing hoses, ensure cap plugs are installed so that
contaminants do not get in the line. Take care when routing hoses,
as a hose failure may damage the compressor and/or cause injury.
Ensure there is sufficient slack in the hose routing to allow for
normal engine movement.
Cut the tube squarely, using only
proper tubing cutters as side cutters
will deform the tube.
Slide the collet out once
the tube is fully inserted
Figure 1 — Push-to-connect fittings
O-ring
☐ PTFE tubing should only be cut using proper tubing cutters. Side cutters, utility
knives, etc. will deform the tube, preventing a proper seal (or leave sharp edges
which cut the internal O-ring).
☐ When applying loom to the PTFE tube, leave approximately 1 in between the
loom and the fitting.
☐ Ensure the tube is clean, cut at 90° and that there are not sharp edges.
☐ Lubricate the tube and firmly push it into the fitting so that the tube fully seats
in the fitting.
☐ Slide the collet out, away from the body of the fitting to lock the tubing in place.
☐ Ensure the tube does not have any “play” to prevent the O-ring from wearing.

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
11
It is impossible to warn of all the possible hazards that may result
from operating, servicing, or repairing this system.
Wear all appropriate Personal Protective Equipment and follow all
industry standard safety practices.
Confirm that the system is depressurized and has cooled prior to
performing any service work.
Never use flammable solvents to clean any components. If a
flammable solvent has been used, rinse the component thoroughly
with water and dry it before reinstalling it to prevent the possibility
of explosion.
This information is intended for people with mechanical trade
certification who have the tools and equipment to properly and
safely perform the service or repair. Do not attempt to service or
repair this system without the appropriate mechanical training,
knowledge and experience.
Follow all safety precautions and industry standard “best practices”.
Maintenance and Repair Safety
Safety Check List
☐ Open the ball valve or connect an air tool to the system to ensure all the stored
air is released.
☐ Gently pull up on the ring on the pressure relief valve (located on the WHASP
Tank) to confirm the system is depressurized.
Do not use the pressure relief valve as a means of depressurizing
the compressor system. Doing so will prematurely wear the internal
spring or the seat, preventing the valve from maintaining normal
system pressure.
Use only genuine VMAC parts to maintain the system.
Genuine VMAC parts are designed to work with the high pressure
and heat generated by the compressor. Substituting genuine VMAC
parts may void the warranty and could cause equipment damage,
injury, or death.
Prior to performing any service, ensure the vehicle is parked on
level ground and that the transmission is in “PARK” with the parking
brake applied and the wheels chocked (if applicable).

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
12
Installation
Systems built prior to mid March 2023 will require rework of the
main harness to ensure the system responds correctly in the case of
an over temperature shutdown command.
Failure to perform this update may result in serious equipment
damage, injury, or death!
Accessory Part# System Systems built prior to
A500237 G300004 G300004CLB036
To look up the “Production Date Code”, scan or click the link to open the VMAC
Serial Number Build Date key:
https://vmacair.com/hubfs/VMAC-System-ID-Build-Code-Key.png
Systems built after the serial numbers listed above, skip to
“Panel Installation” on page 19.

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
13
☐ Disconnect the negative battery terminal.
☐ Cut the cables ties securing the compressor temperature switch harness
(Figure 2).
Starter motor
(for reference)
Figure 2 — Cut cable ties
Cut cable
ties
Remove
wire holder

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
14
☐ Disconnect the black ignition wire on the OEM Honda harness (Figure 3).
Figure 3 — Disconnect ignition wire
Ignition wire connected Ignition wire disconnected
Ignition wire Ignition wire
☐ Disconnect the female wire connector running from the compressor temperature
switch (Figure 4).
Figure 4 — Disconnect female temperature switch connector
Temperature switch
harness

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
15
☐ Install the supplied jumper wire between the female temperature switch
connector and the black OEM Honda ignition wire (Figure 5).
Ignition wire
Figure 5 — Install jumper wire
Female temp.
switch connector
Jumper
wire

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
16
☐ Disconnect the male wire connector running from the compressor temperature
switch (Figure 6).
Figure 6 — Disconnect male temperature switch connector
Temperature switch
harness

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
17
☐ Connect the female ignition wire (disconnected on page 14) to the male
temperature switch connector (Figure 7).
Figure 7 — Connect female ignition wire to temp. switch
Male temp switch
harness
Female ignition
switch harness

VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
18
☐ Connect the remaining male and female harnesses together (Figure 8).
Figure 8 — Connect remaining harnesses together
Connect
Connected
To ensure the system has been updated correctly, the test
procedure on page 28 (Systems Requiring Harness Update Only)
must be completed after the Remote Panel has been installed.