Voda Plumbingware VDRM043 User manual

9 421027 596726
DreamJet Slide Shower
Chrome & Black
VDRM043
Voda Plumbingware Limited | Freephone: 0508 367 366 | 5 Hewlett Street, Port Whangarei 0110 | vodaplumbingware.co.nz
Congratulations on your purchase of this high quality product from Voda Plumbingware.
Please read the following before installation and retain (along with your receipt).
TECHNICAL SPECIFICATIONS
Suitable for All Pressures
Minimum Pressure = 50kPa
Maximum operating Pressure = 500kPa
Maximum operating Temperature = 65 deg. Celsius
For domestic use only.
CONFIGURATION
Mains Pressure systems Install as supplied.
Unequal Low systems First remove the flow restrictor disc from inside the screw end of the handpiece.
Equal Low systems First remove the flow restrictor disc from inside the screw end of the handpiece.
CONTENTS
• Rail with adjuster/holder
• Wall brackets and covers
• Fixing kit
• 1.5m supply hose
• Supply elbow
• Shower handpiece
• Flow restrictor for Mains Pressure installation
INSTALLATION
See steps on the next page, then attach the supply elbow to the supply connection on the wall.
If installing on Low or Unequal water pressure systems - please remove the flow restrictor disc for optimal flow.

4
2
1
3
4
5
6
WARRANTY
Please refer to our website for warranty information: www.vodaplumbingware.co.nz/warranty
In the unlikely event that this product fails during its warranty period, phone our Customer Service team
immediately on 0508 367 366 – as unauthorised removal of the product may void the warranty.
CARE AND MAINTENANCE
Chrome-plated finishes should not be cleaned with astringent, abrasive or citric cleaners.
A so, damp cloth is recommended for cleaning. Mild soap solutions can also be used on occasion.
ATTACH PROOF OF PURCHASE HERE
Voda Plumbingware Limited | Freephone: 0508 367 366 | 5 Hewlett Street, Port Whangarei 0110 | vodaplumbingware.co.nz
Wall brackets can be adjusted
to achieve desired height.
1. Measure and mark hole positions (at points A and B) with a
pencil at the required distance (max. 795mm apart).
2. Drill two mounting holes where you have marked.
3. Fit the wall fixing parts into the drilled holes.
4. Push the rail bracket onto the wall fixings, then tighten
the grub screws.
5. Fix the elbow to the wall.
6. Attach hose to elbow and handpiece then insert shower
handpiece into holder.
900mm
Rail
Wall fixing
Grub screw
Handpiece
Hose
Elbow
Pointed screw
Wall plug
520mm
to
795mm