Voda Plumbingware Proline VPLNBT1 User manual

9421027 594906
Voda Plumbingware (NZ) Ltd | Freephone: 0508 367 366 | 5 Hewlett Street, Port Whangarei 0110 | vodaplumbingware.co.nz
Proline Basin Taps
VPLNBT1
Congratulations on your purchase of this high quality product from Voda Plumbingware.
Please read the following before installation and retain (along with your receipt) for future reference.
TECHNICAL SPECIFICATIONS
Suitable for All Pressures
Minimum Pressure = 17kPa
Maximum operating Pressure = 500kPa
Maximum operating Temperature = 65 deg. Celsius
For domestic use only.
CONFIGURATION
Mains Pressure systems Insert the valve from
the mains pressure pack.
Unequal Low systems Install as supplied.
Equal Low systems Install as supplied.
INSTALLATION
For pressures exceeding 500kPa, install a pressure reducing valve. Failure to do so will void the warranty.
NOTE: In order to remove handles, the chrome disc needs to be prized out and handle retaining screw undone.
• Before commencing installation, turn o the water supply.
• Drill a minimum 25mm hole within the vanity top.
• Remove back-nut and basin spacer.
• Mount tap with O-ring in base groove.
• Fit basin spacer underneath and tighten on back-nut.
• Connect to plumbing.
• Turn on the water supply.
• Check for leaks.
O Ring
Bench/Vanity Top
(not supplied)
Basin Spacer
Back-nut
Tail-Pipe
Lip
*Mains Pressure
Valve (1 per tap)
Supply Hose
(not supplied)
85mm

Voda Plumbingware (NZ) Ltd | Freephone: 0508 367 366 | 5 Hewlett Street, Port Whangarei 0110 | vodaplumbingware.co.nz
ATTACH PROOF OF PURCHASE HERE
WARRANTY
Please refer to our website for warranty information: www.vodaplumbingware.co.nz/warranty
In the unlikely event that this product fails during its warranty period, phone our Customer Service team
immediately on 0508 367 366 – as unauthorised removal of the product may void the warranty.
CARE AND MAINTENANCE
When cleaning your Voda product (including chrome, stainless steel, coloured or any other surface coating) you
must not use any type of astringent, abrasive or citric cleaners.
We recommend using only a so, damp cloth and on occasion a mild soap solution. Try to avoid excessive
scrubbing as this could cause damage and void your warranty.