Volcora V-LHHBS-A1B User manual
Wireless Handheld
Barcode Scanner
with Stand
User's Manual
Models:
V-LHHBS-A1B
V-LHHBS-A1W
Website | www.volcora.com
Email | [email protected]om
Volcora Site
Notices
1. Please read the user manual carefully before using this product.
2. The working voltage of this barcode scanner is 3.3V, charging
voltage 5V. Please use our original USB cable to ensure the
scanner work properly.
3. Copyright and Patent Right: Our company has applied for patent
rights, copyrights and soware copyrights for this product and its
accessories (including hardware, setting soware,
documentations, appearance, etc.)
4. The company reserves all rights and the company reserves the
right to make any changes to the product to improve its reliability,
improve its function or design. The company shall not be
responsible for any product liability related to or arising from the
application or use of any products, circuits, or other applications
described herein.
5. Package Includes:
Standard Package
·Barcode scanner (1 piece)
·WIFI dongle (1 piece)
·USB cable (1 piece)
·User manual (1 piece)
Optional Accessory: Base
Optional Function: Vibration
6. The contents of this manual are subject to change without prior
notice.
1
BT 2.4G Wireless Barcode Scanner
Contents
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Notices
Introduction & Features
Application & Parameters
Working Environment & Related Regulations
Installation of Cable
Initialization Settings & Version Information
BluetoothPairing Method
Pull up/Hide keyboard (IOS system) & Caps Lock Switch & Caps Lock Switch
2.4G Wireless Pairing Method
Sound/Vibration Setting
Sleep Time Setting
Ending Character Setting
Keyboard Language Setting
Transmission Speed Setting & Bluetooth Protocal
Working Modes
Change Bluetooth Name
Hide Pre-characters/Post-characters
Add Time As Prefix or Suffix & Update Time
Prefix/Suffix Setting
2.4G Wireless COM-Port Mode Setting
Enable/Disable HID Searching by Pressing Scan Button 8S Settings
AppendixA: Controlled Characters
pendixB: Displayable Characters
FAQ (Frequently Asked Questions)
Buzzer description
LED indicator
.......................................................................................................... 1
............................................................................... 3
............................................................................ 4
............................................ 5
..................................................................................... 6
............................................. 7
............................................................................ 7
. 8
...................................................................... 9
............................................................................ 10
..................................................................................... 10
........................................................................... 11
................................................................ 12-13
.................................. 14
..................................................................................... 15-16
........................................................................... 17
.................................................. 18-19
....................................... 20-21
.............................................................................. 22-23
...................................................... 24
..... 24
...................................................... 25-27
......................................................... 28-31
........................................................... 32
..................................................................................... 33
.............................................................................................. 33
2
BT 2.4G Wireless Barcode Scanner
Introduction
The series of barcode scanner produced by our company feature as
strong light source, enhanced long-distance scanning technology. It
can read the damaged, stained and poor printed barcode fast under
different ambient light conditions. It is durable in use, since it is
protected by the industrial safety technique. High volume buzzer is
another hint of success scanning besides LED light in the noisy
industrial environment.
Features
·Wired, wireless and Bluetooth triple-mode freely switching.
·Large capacity storage, safe and reliable.
·Stores barcodes more than 50000pcs off-line scanning.
·Unique power management system, ultra-long standby time.
·Rich symbologies supported Adopting imported trigger button,
long lifespan, fitting perfectly in your hand for comfortable use.
·Support Android/iOS devices/Windows Support HID, SPP, BLE
protocol.
·Mini size, fashion design, and portable.
·Ultra low power consumption and standby time setup available
·2.4G transmission distance: up to 100 meters in open areas.
·Bluetooth transmission distance: indoor transmission distance up
to 15 meters. Support upload data and charge the battery via USB
cable at the same time.
3
BT 2.4G Wireless Barcode Scanner
Application
Parameters
·Applicable to Business (electrical, book, clothing, medicine,
cosmetics, etc.), retail industry, postal service,
telecommunications industry, warehousing, logistics industry,
public security system, customs systems, banking system, medical
system.
·Compatible with Microso, Android, Linux and other operating
systems and Bluetooth protocol
·Support multi-national keyboard language
·Wireless protocol: Bluetooth 2.4G
·Memory: 16 Mb
·Processor: ARM Cortex 32bits
·Bluetooth version: Bluetooth 4.1 Module
·Supported symbologies:
1D: Codabar, Code 11, Code93, MSI, Code 128, UCC/EAN-128, Code
39, EAN-8, EAN-13, UPC-A, ISBN, Industrial 25, Interleaved 25,
Standard 25, 2/5 Matrix, 2D:QR, DataMatrix, PDF417, Aztec, Hanxin,
Micro PDF417 (option)
·Indicator: Led, Buzzer, Vibrator (option)
·Battery capacity: 1800 mA
·Charging voltage/current: 5V/1A
·Endurance: 1D ≤ 24H, 2D ≤ 16H (5seconds/scan)
·Charge time: ≤ 4 hours
·Standby: > 30 days
4
BT 2.4G Wireless Barcode Scanner
Working Environment
Related Regulations
Electrical safety:
In accordance with UL1950, CSA C22.2 No.950, EN60950/IEC950
EMI/RFI: FCC Part 15 Class B, European Union EMC Directive, Taiwan
EMC, Environment Terms: In accordance with RoHS directive
2002/95/EEC
·Working Temperature: 32°F to 104°F/0°C to 40°C
·Storage Temperature: -40°F to 140°F/-40°C to 60°C
·Humidity: 5% to 95% relative humidity (no condensation)
·Ruggedness:
Resist about 6 times drops from 1.5m to concrete ground
·Ambient Light Immunity:
Under normal office and factory ambient lighting conditions, or
exposed to the sun wonʼt take any effect to it.
·Electrostatic discharge:
In line with 15KV air discharge and 8KV contact discharge
requirements
5
BT 2.4G Wireless Barcode Scanner
Installation of Cable
Each barcode scanner is with one USB cable., For connection, please
refer to above sample diagram.
(!) Noted: Computer host can charge scanner via USB cable and USB cable can
also be used as a wire to transmit barcodes.
The installation method is as follows:
1. Connect USB cableʼs Square Side interface to the bottom of the
scanner.
2. Connect the other side of USB to the computer host.
3. Our barcode scanner features with wireless transmission mode
and USB cable transmission mode. When triggered to wake up,
the scanner will automatically identify whether the USB cable is
connected. If identify, it will work in USB cable transmission
mode, data transmitted via USB cable; If not, will work in wireless
transmission mode, data transmitted via Bluetooth wireless.
6
BT 2.4G Wireless Barcode Scanner
Sample graph
USB Cable
Installation
(A) Long press the trigger for 8 seconds or scan the HID Pairing
Setting Code to make the scanner entering Bluetooth pairing
state, then the two blue lights flash alternately le and right.
BluetoothPairing Method
Initialization Settings & Version
Information
(A) You can scan the setting code "Initialization Settings" to make
the scanner back to factory default settings
(B) If you have aer-sales problems and need to contact our
customer service staff, please provide version information by
scanning setting code "Version Information"
Initialization
settings
Version
information
BT 2.4G Wireless Barcode Scanner
Bluetooth pairing setup code
7
(B) Turn on Bluetooth searching in the user's device, find Bluetooth
scanner "Barcode scanner HID" and click on to start the pairing
state. Aer a beep prompt sound, the scanner is paired
successfully, and the blue light on the right is always on.
Notes: When the scanner is entered Bluetooth pairing status and it does not get
connected with your device within 1minutes, it will beep twice lowly and longly.
You need to repeat above-mentioned 3 steps to make it connect with your
device. (When the scanner is in the Bluetooth pairing status, double-click can
make it exit the pairing mode).
Pull Up/Hide Keyboard (iOS System) &
Caps Lock Switch
Caps Lock Switch
BT 2.4G Wireless Barcode Scanner
8
Pull up/hide iOS keyboard
%%SpecCode1A
Double-click to pull up iOS keyboard
Double-click to hide iOS keyboard
All lowercase
All uppercase
Do not convert case
Case interchange
(B) Scan the setting code Forced Pairing with Dongle, The scanner
will enter pairing state, and the blue light on the le flashes
quickly.
(C) Insert Dongle into the device, aer a beep prompt sound, the
scanner is paired successfully, and the blue light on the right is
always on.
Notes: When the scanner is entered 2.4G pairing status and it does not get
connected with your device within 1 minutes, it will beep twice lowly and
lonely. You need to repeat above-mentioned 3 steps to make it connect with
your device. (When the scanner is in the 2.4G pairing status, double-click can
make it exit the pairing mode).
2.4G Wireless Pairing Method:
(A) Scan the setting code of Dongle.
BT 2.4G Wireless Barcode Scanner
9
%%SpecCodeA8
Sound OFF
Sound ON
Vibration OFF (optional)
Vibration ON (optional)
Sleep Time Setting
1 min
5 min
10 min
30 min
Sound/Vibration Setting
Never Sleep
Sleep Immediately
BT 2.4G Wireless Barcode Scanner
10
Add CR (Carriage Return)
Add LF (Linefeed)
Add CR+LF
Cancel CR + LF
Add TAB
Ending Character Setting
BT 2.4G Wireless Barcode Scanner
11
Keyboard Language Setting
BT 2.4G Wireless Barcode Scanner
12
English (USA)
German
French
Spanish
Italian
Janpanese
French (Switzerland)
Belgian
International Universal Keyboard
Portuguese
English (UK)
Portuguese (Brazil)
BT 2.4G Wireless Barcode Scanner
13
Czech
French (Canada)
Hungarian
Polish
Sweden / Finland
Spanish (Mexico)
Argentine (Latin America)
Norwegian
German (Swizerland)
Russian
Transmission Speed Setting
Choosing the transmission speed according to the receiving speed of
the device
Fast
Slow
Bluetooth Protocal
Bluetooth HID
Bluetooth SPP
Bluetooth BLE
Notes: Scanning any one of above 3 setting codes can make the scanner enter
bluetooth pairing status.
Super Slow
Middle
BT 2.4G Wireless Barcode Scanner
14
Under "Normal Mode", the data of the code you scanned will be
transferred to your device via Bluetooth, 2.4G or USB A short and low
beep show the data is transferred successfully. If not, the scanner will
beep 3 times shortly and lowly. Under "Normal Mode", if scans
failure, the data you just scanned will lost.
Under "Storage Mode", the data of the code you just scanned will be
stored in the scanner. And scanner beep once shortly and slowly aer
each scanning. Scanner will beep 3 times aer scanning a code if its
storage space is full.
You can check the storage data amount by scanning following setting
code
Working Modes
BT 2.4G Wireless Barcode Scanner
15
Normal Mode
Storage Data Amount
Storage Mode
Scanning following setting code to upload the data you have
scanned to your device via Bluetooth, 2.4G wireless or USB.
Notes: Making sure that scanner is got connected with your device.
Aer uploading data, the data which have been stored in the scanner
will not be deleted from the scanner
Scanning following setting code to clear all the data which is stored
in the scanner. All data will be deleted aer scanning setting code
"Clear Data", so please confirm that you have uploaded those data to
your device if you need them.
BT 2.4G Wireless Barcode Scanner
16
Upload Data
Clear Data
3rd: Scanning following setting code to set the name as default.
Change Bluetooth Name
1st：Scanning following setting code”Change BT Name”
2nd: Scanning a customized codes which its data is the name you
want. You can generate a customized code via barcode generator, like
label shop. Or you also can contact with us to generate a code for
you. For example: Following barcode's data is "Scanner123", aer
you scanned it, the Bluetooth name of your scanner will be changed
to "Scanner123".
Scanner123
BT 2.4G Wireless Barcode Scanner
Change BT Name
Save Setting
17
Hide Pre-characters/Post-characters
1st: Scanning following setting code “Hide Pre-characters” or “Hide
Post-characters”
2nd: Choosing how many characters you need to hide.
BT 2.4G Wireless Barcode Scanner
Hide Pre-characters
Hide Post-characters
1
3
5
7
2
4
6
8
18
This manual suits for next models
1
Table of contents
