Volfoni SmartCrystal Cinema Neo VPSP-11100 User manual

www.volfoni.com Page 1
SmartCrystal™Cinema Neo
n ° : MUV160028
Version : A11
USER MANUAL
Date : 07/01/2020
Model VPSP-11100

www.volfoni.com Page 2
SmartCrystal™Cinema Neo
n ° : MUV160028
Version : A11
USER MANUAL
Date : 07/01/2020
SUMMARY
SUMMARY................................................................................................................................... 2
I. PRODUCT OVERVIEW......................................................................................................... 3
II. REQUIREMENTS ................................................................................................................. 3
III. SMARTCRYSTAL CINEMANEOFEATURES....................................................................... 5
A. General specifications ........................................................................................................... 5
B. Technicalspecifications......................................................................................................... 5
C. Electricalspecifications.....................................................................................................5
D. Projector settings.................................................................................................................. 6
IV. USING THE SMARTCRYSTALCINEMANEO....................................................................... 6
A. User interfacedescription ....................................................................................................... 6
B. Using theuser interface......................................................................................................... 7
1. ON /OFFswitch...................................................................................................................................7
2. 2D/3Dmode............................................................................................................ 7
3. Network connection –Rj45 plug..........................................................................................................7
4. Software update –USBport.................................................................................................................7
5. LEDcheck............................................................................................................................................8
6. Remote control.....................................................................................................................................8
7. BNC connector ....................................................................................................................................8
8. Connectthepower cableto SmartCrsytal™ Cinema............................................................................8
9. Snaphook............................................................................................................................................9
10. Easymaintenance ...............................................................................................................................9
V. SMARTCRYSTAL CINEMANEO BRACKET........................................................................10
VI. INSTALLATION................................................................................................................... 11
A. Phase one............................................................................................................................12
B. Phase two ............................................................................................................................12
VII. TROUBLESHOOTING........................................................................................................ 13
VIII. SOFTWARE UPDATE.....................................................................................................14
IX. IMPORTANTSAFETY RECOMMENDATIONS.................................................................14
X. WARRANTY ...................................................................................................................15
XI. FURTHERINFORMATION ................................................................................................. 15
XII. REGULATORY STANDARDS..............................................................................................15

www.volfoni.com Page 3
SmartCrystal™Cinema Neo
n ° : MUV160028
Version : A11
USER MANUAL
Date : 07/01/2020
I. PRODUCT OVERVIEW
The SmartCrystal™ Cinema Neo is Volfoni’s latest innovation in passive 3D
technology. The SmartCrystal™ Cinema polarization window is placed directly in
f r o n t o f a 3 D c i n e m a p r o j e c t o r l e n s , t h e r eb y g e n e r a t i n g s t e r e o s c o p i c 3 D i m a g e s o n
suitable screens when viewed with passive 3D glasses.
T h is p a ssi v e p o l a r i z a t i o n s y s t e m is pe r f e c t fo r a n y m o v i e t h e a t e r w i t h D C I - c o m p li a n t
DL P p r o j e c t o r s , a n d pe r m i t s a q u i c k i n s t a ll a t i o n i n a n y p r o j e c t i o n b oo t h w i t h it s
optimal supportbrackets.
The SmartCrystal™ Cinema panel is made of a multi-layer stack of liquid crystal
elements.This enables high frame rates of up to 240Hz, creating crisp and bright 3D
images.
The SmartCrystal™ Cinema Neo can be connected directly to any suitable 3D
s y n c h r o n i z a t i o n s o u r c e a n d o pe r a t e s w i t h c i n e m a p r o j e c t o r s u p t o 7k W .
II. REQUIREMENTS
Fig 01
To use the SmartCrystal™ Cinema Neo unit, the following is required:
• 3D content
• 3 D c i n e m a p r o j e c t o r
• Polarization preserving silver screen
• Passive circular-polarized 3D glasses
Fig 02

www.volfoni.com Page 4
SmartCrystal™Cinema Neo
n ° : MUV160028
Version : A11
USER MANUAL
Date : 07/01/2020
Most types of 3D cinema projectors are compatible with the SmartCrystal™ Cinema Neo
system.
D L P ( D i gi ta l L i gh t P r o c e ssi ng) projectors ar e especially e ffic i ent for 3 D projection . Th e
s y s tem is e as y to set - up with a DCI - c om p li ant DLP projector an d works w i t h p r oje c to r
lamps up to7KW.
LCD™ (Liquid Crystal Display) and LCoS™ (Liquid Crystal on Silicon) projection
tec hno l og i e s , s uc h as J V C’ s D - I L A ™ and Sony ’ s SXR D ™, ge ne r at e a pol ar i zed li gh t be a m
that may not be compatible with SmartCrystal™ Cinema Neo’s active polarization
system. Please consult Volfoni for additional information.
Polarization-preserving silver screen
In order to enjoy the best quality of 3D images, a polarization-preserving silver screen
designed for 3D projection is required. If your screen was not manufactured specifically
for 3D use, you might experience uncomfortable and blurry 3D images with a high level of
cross-talk.
The SmartCrystal™ Cinema is designed for projection with screen sizes up to 20 meters (66
feet) wide, with a 2.4 screen gain.
Passive polarized 3D glasses
The SmartCrystal™ Cinema Neo is compatible with most commonly used passive 3D
glasses (circular-polarized only).

www.volfoni.com Page 5
SmartCrystal™CinemaNeo
n ° : MUV160028
Version : A11
USER MANUAL
Date : 07/01/2020
Passive 3D glasses as wellas clip-on 3D glasses are available from Volfoni. Please contact
us for more details. [e-mail]
III. SMARTCRYSTAL CINEMA NEO FEATURES
A. General specifications
• Aluminum mechanical-housingmaterial
• Pi-Cell Technology for crisp and bright 3D images
• Upgradable software for optimal 3D performance
• Meets all standards for electronics approved by CE
• Easy maintenance
• 3-year warranty
• For use with lightweight circular-polarized passive 3D glasses
B. Technical specifications
• M a x i mum p o w e r o f p r o j e c t o r l a m p : 7 k W
• Maximum switching speed: 244Hz
• Op t i c a l li g h t e ff i c i e n c y : > 18 %
• Power supply: 100V-240V 50/60Hz
• Operating temperature: +10°C to +40°C (50°F to 122°F)
• Storage temperature: -5°C to+50°C(23°F to 122°F)
• Polarizationwindow dimension: 171 x 116mm (6.7 x 4.5 in)
• Productdimensions (L x W x H): 380x 254 x 77mm (15x 10 x 3in)
• Weight: 6kg(13.2lbs)
C. Electrical specifications
• V= 100-240 V AC
• F = 50 / 60 Hz
• P = 18 W
• I=0,7A
• The unit has a built-in surge protector
• The system is supplied with different adapters: UK, EU, US
• This equipment should be electrically grounded
• In case of malfunction, one of the LED indicators on the control board will light up
• To rectifyany indicated faults,please contact your reseller or integratorstating the model
number shown on the silver label of the product.

www.volfoni.com Page 6
SmartCrystal™CinemaNeo
n ° : MUV160028
Version : A11
USER MANUAL
Date : 07/01/2020
Delay: 0
Fig 03
D. Projector settings
T o u s e t h e S m a r t C r y s t a l ™ C i n e m a N e o , t h e 3 D p r o j e c t o r s h o u l d be s e t a s be l o w :
IV. USING THE SMARTCRYSTAL CINEMA NEO
A. User interface description
1- Switch ON/OFF
2- 2D/3D
3- RJ45 (NOC)
4- USB (Software Update)
5- LEDS (Visual Control)
6- Remote control
7- BNC (Synchronisation)
8- 12V (Power supply)

www.volfoni.com Page 7
SmartCrystal™CinemaNeo
n ° : MUV160028
Version : A11
USER MANUAL
Date : 07/01/2020
When not using the SmartCrystal™ Cinema, put the system in 2D mode to protect
the polarization window from dust and damage, and thereby increase product
longevity.
B. Using the userinterface
1. ON / OFF switch
Put this button in position ON to power the SmartCrystal™ Cinema Neo and begin
operatingthe system. Put it in position OFF whenyou want to stopusingthe 3D system.
2. 2D / 3Dmode
There is one button that moves the polarization window of the SmartCrystal™ Cinema
Neo left and right. When the system is powered, press this button and the polarization
window will emerge from its encasement (3D mode). Press this same button when you
want to stop using the SmartCrystal™ Cinema, and the polarization window will go back
inside its encasement (2D mode).
This button blinks in green when the polarization window is moving. Typically when you
open or close the polarization window of the SmartCrystal™ Néo.
This button is green continuously when the 3D system is open and the polarization window
is out of the encasement. This button is not illuminated when the polarization window is in
2D mode.
Security system: The polarization window will stay in 3D mode if the 3D sync is still
detected. This is a security measure to prevent the closing of the 3D system during a 3D
projection.
3. Network connection –Rj45 plug
The NOC connector allows the system to be connected to a central network in order to
retrieve information and perform remote operations on the SmartCrystal™ Cinema Neo
(e.g., monitoring, remote control, etc.).
There are two different modes of use for the SmartCrystal™ Cinema Neo:
• Manualmode: the user interface of the SmartCrystal™ Cinema Neo directly controls the
operation of the 3D system.
• NOC mode: information and operations are automatically sent from the server via the
central network.
4. Software update –USB port
Please referrer page 8 of this user manual (part 8).

www.volfoni.com Page 8
SmartCrystal™CinemaNeo
n ° : MUV160028
Version : A11
USER MANUAL
Date : 07/01/2020
5. LED check
There are 4 different LED lights that indicate the following information:
LED number 1: STATE OF FAN
This LED is blue when the fan is running and red when there is a problem with the
ventilation system.
LED number 2: STATE OF MOTOR
This LED is blue when the motor is running and red when there is a problem with the
system.
LED number 3: STATE OF SYNC
This “SYNC” LED operates as follows:
- Once the systemis powered (but not synchronized), the SYNC LED will illuminate in red.
The system starts as soon as it is connected to a power source.
- Once the SmartCrystal™ Cinema receives the synchronization signal, the SYNC LED will
illuminate in blue as follows:
• Blue continuous light: signal for 2D synchronization (less than 96Hz)
• Blue blinking light: signal for 3D synchronization (greater than 96Hz)
LED number 4: POWER SUPPLY
This LED is blue when the system is properly powered and off when the system is not
powered.
6. Remote control
Will be developed later
7. BNC connector
The BNC connector allows the user to synchronize the SmartCrystal™ Cinema Neo with
t h e c i n e m a p r o j e c t o r . T h r ee c a b l e s a r e s u pp li ed w i t h t h e S m a r t C r y s t a l ™ C i n e m a N e o :
B N C / B N C c a b l e ( 2 m e t e r s l o n g ) B N C / G P I O 15 c a b l e ( 2 m e t e r s l o n g ) B N C / G P I O 37 c a b l e ( 2
meterslong)
8.
Power IN
Connect the power cable to SmartCrsytal™ Cinema

www.volfoni.com Page 9
SmartCrystal™CinemaNeo
n ° : MUV160028
Version : A11
USER MANUAL
Date : 07/01/2020
When you want to get back to
the automatic mode you have
to push the LCD’s frame toward
the inside till you feel the
mechanical connection.
Then check that the LED number
2 isn’t red.
9. Snap hook
To increase safety, please use the snap hook when fixing the SmartCrystal™ Cinema Neo.
10. Easy maintenance
To facilitate the maintenance, you can operate the frame manually. It allows you to
easily clean the LCD from dust for example.
a. Unscrew 2 followingscrews
b. FixthehandletotheLCDframewith
the two screws you have just remove

www.volfoni.com Page 10
SmartCrystal™CinemaNeo
n ° : MUV160028
Version : A11
USER MANUAL
Date : 07/01/2020
V. SMARTCRYSTAL CINEMA NEO BRACKET
B e f o r e i n s t a lli n g t h e S m a r t C r y s t a l ™ C i n e m a N e o i n f r o n t o f t h e p r o j e c t o r l e n s , m a k e s u r e y o u h a v e
all the needed tools and the instruction manual. This wall fixing part is provided with all the screws
and wall anchors you might need.