volkano Retro Series User manual

Retro Series
1
3
4
2

MODE
LED
/MMC
/MMC

1. Adjusting the Volume
Function Operation
Increase / Decrease
Volume
Rotate the Volume Control
• Clockwise to increase the volume
• Counter-clockwise to decrease the volume
2. Audio Control
Function Operation
Bluetooth, USB & Micro SD Card Modes
Navigate to Next Track Short press the Next Track Button
Navigate to Previous Track Short press the PreviousTrack Button
Play or Pause Track Press and hold the Play / Pause Button
Phonograph Mode
Turn Auto Stop On / Off Flick the Auto Stop Switch to the respective position
To set the Playback Speed Flick the Speed Switch to the respective position
Playing A Phonograph Record
1. Lightly place the record that you wish to play on
the Turntable plate.
2. Unclip the Tonearm protector and push the Cue Lever back.
3. Slide the Tonearm over the record, at this point the record
will start spinning. Pull the Cue Lever forward. The Tonearm
will slowly lower itself until it rests on the record; the Retro
will start playing the record.
Stop Playing a Phonograph
Record
1. Push the Cue Lever back.
2. Slide the Tonearm to above the Safety Clip.
3. Pull the Cue Lever forward and allow the Tonearm to rest
on the holder.
4. Clip the Tonearm Protector into place.
5. Remove the record from the Turntable.
3. FM Controls
Function Operation
Navigate to Next Station Short press the Next Track Button
Navigate to Previous Station Short press the Previous Track Button
Auto Search for FM Stations Press and hold the Play / Pause Button